
Buttons
perpuchaty/MQTT-Geiger-Counter
Portable Geiger counter with WiFi and MQTT. Home assistant compatible

Portable Geiger counter with WiFi and MQTT. Home assistant compatible
Geiger Counter is an open-source printed circuit board by perpuchaty, from the perpuchaty/MQTT-Geiger-Counter repository on GitHub. It is a 2-layer board of 85 × 75 mm with 137 parts on 95 nets, routed with 868 tracks and 131 vias.
It is built around the ESP32-C6FH4, B0505S-2WR3 and ETA3485S2F, with the ADUM3160BRW, FM5332D and TP4056-42-ESOP8 among its other parts. Its parts include 45 resistors, 41 capacitors, 16 diodes, 11 transistors and 6 ICs. It belongs with the sensors and measurement and radio and wireless boards and the ESP32 and RISC-V boards of this library.
This repository contains the hardware design files for a Geiger counter project.

The project is organized as three PCB blocks:
Mainboard/
Project/)Production/Gerber/, Production/Assembly/)Datasheets/)Sensor PCB/
sensor/)Production/Gerbers/)Button PCB/
Buttons PCB/)Production/Gerbers/, Production/Assembly/)| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100nF | Capacitor_SMD:C_0402_1005Metric | C9, C14, C17, C18, C21, C25, C28, C33, C34, C35, C38, C41 |
| 10 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C7, C8, C11, C12, C30, C31, C39, C40, C96 |
| 8 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R7, R12, R17, R39, R43, R44, R45 |
| 8 | 22pF | Capacitor_SMD:C_0402_1005Metric | C10, C19, C20, C22, C24, C27, C36, C37 |
| 7 | BC817W,115 | Package_TO_SOT_SMD:SOT-323_SC-70 | Q2, Q10, Q11, Q12, Q13, Q14, Q15 |
| 5 | 1k | Resistor_SMD:R_0402_1005Metric | R16, R18, R35, R38, R42 |
| 5 | PESD5V0F1BL | Diode_SMD:D_SOD-882 | D13, D14, D15, D16, D17 |
| 4 | 0R | Resistor_SMD:R_0402_1005Metric | R28, R29, R37, R46 |
| 4 | 100k | Resistor_SMD:R_0402_1005Metric | R8, R13, R40, R41 |
| 4 | 1M | Resistor_SMD:R_1206_3216Metric | R31, R32, R33, R34 |
| 4 | 20M | Resistor_SMD:R_1206_3216Metric | R21, R24, R25, R30 |
| 4 | MM1W82 | Diode_SMD:D_SOD-123 | D6, D7, D8, D9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 0R | Inductor_SMD:L_0402_1005Metric | L1, L4, L5 |
| 3 | BAS70X | Diode_SMD:D_SOD-523 | D2, D3, D4 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric | R23, R36 |
| 2 | 100nF | Capacitor_SMD:C_1812_4532Metric | C43, C44 |
| 2 | 100nF | Capacitor_THT:C_Rect_L11.5mm_W5.6mm_P10.00mm_MKT | C26, C42 |
| 2 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-2012-12_Kemet-R | C23, C81 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C29, C32 |
| 2 | 4k7 | Resistor_SMD:R_0402_1005Metric | R2, R4 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R26, R27 |
| 2 | AP2301 | Package_TO_SOT_SMD:SOT-23-3 | Q1, Q3 |
| 2 | LJ-1.5LT-3P | Footprints:LJ-15LT-3P | J1, J5 |
| 1 | 0.75pF | Capacitor_SMD:C_0402_1005Metric | C16 |
| 1 | 0R2 | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 15mH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx_HandSoldering | L3 |
| 1 | 18k | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 1pF | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C13 |
| 1 | 2.2uH | Inductor_SMD:L_APV_ANR4020 | L2 |
| 1 | 220R | Resistor_SMD:R_0402_1005Metric | R15 |
| 1 | 22k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 2M | Resistor_SMD:R_1206_3216Metric | R22 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q5 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 2k2 | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 2k7 | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 4.7M | Resistor_SMD:R_1206_3216Metric | R20 |
| 1 | 40MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 47M | Resistor_SMD:R_1206_3216Metric | R19 |
| 1 | ?? | Package_TO_SOT_SMD:SOT-23 | D12 |
| 1 | ADUM3160 | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U3 |
| 1 | AU1PK-M3/84A | Diode_SMD:D_SMP_DO-220AA | D5 |
| 1 | Antenna_Shield | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | B0505S-2WR3 | misc:B0505S-2WR3 | U4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Horizontal | J3 |
| 1 | Conn_01x12_Pin | lcd:NHD-C12864A1Z-FSW-FBW-HTT | J6 |
| 1 | DI2579N | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q4 |
| 1 | ESP32-C6FH4 | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias | U2 |
| 1 | ETA3485S2F | Package_TO_SOT_SMD:SOT-23-5 | IC6 |
| 1 | FC-05A8P11H20 | misc:FPC_8 | J7 |
| 1 | FM5332D | Package_TO_SOT_SMD:SOT-23-3 | IC8 |
| 1 | KPTR-3216ZGC | Diode_SMD:D_1206_3216Metric | D10 |
| 1 | QMB-09B-03 | Buzzer_Beeper:MagneticBuzzer_PUI_AT-0927-TT-6-R | BZ1 |
| 1 | SS14 | Diode_SMD:D_SMA | D1 |
| 1 | TP4056-42-ESOP8 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U1 |
| 1 | TYPE-C-31-M-12 | misc:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |

perpuchaty/MQTT-Geiger-Counter
Portable Geiger counter with WiFi and MQTT. Home assistant compatible

perpuchaty/MQTT-Geiger-Counter
Portable Geiger counter with WiFi and MQTT. Home assistant compatible

perpuchaty/MQTT-Geiger-Counter
Portable Geiger counter with WiFi and MQTT. Home assistant compatible




klnspdr/pico2-artnet-node
PCB + SMD Components: 8.146$ / board Missing Components: - 4x XLR Connectors (1.40€ / piece) - 1x WizNet W5500-EVB-PICO2 (12€ / piece) - 1x B0505S (1.05$ / piece) - 1x WIZPoE Module (8€ / piece) - 2x 1x20 2.54mm…


ademuri/air-filter-controller
The ESP32-S3 uses 3.3V. I want onboard indicator LEDs, and the option to have offboard LEDs as well. Using addressable WS2812-type LEDs is flexible. These need a 5V supply.

maltaisn/game-console
Small handheld game console with 6 buttons, 1.5" grayscale display, with bootloader and multi-games support.

CosShin/FC_AniH743
Trái tim của bo mạch là vi điều khiển STM32H743VIH6 (ARM Cortex-M7 @ 480 MHz), kết hợp cụm cảm biến quán tính kép Dual Bosch BMI088 độc lập chống rung cơ học, cảm biến khí áp độ chính xác cao SPL06-001, bộ nhớ lưu trữ…
It measures 85 × 75 mm and has 2 copper layers, 1.6 mm thick.
137 parts, built around the ESP32-C6FH4, B0505S-2WR3, ETA3485S2F and ADUM3160BRW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the perpuchaty/MQTT-Geiger-Counter repository on GitHub, at the commit this page was made from: the board is Mainboard/Project/Geiger Counter.kicad_pcb and its schematic Button PCB/Buttons PCB/buttons.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask perpuchaty before reusing the design.