
RedPitaya Lockbox
TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board
Open-source boards designed in KiCad by TU-Darmstadt-APQ on GitHub, from 14 repositories. A board’s address here is its repository’s there.

TU-Darmstadt-APQ/RedPitaya-Lockbox
Digital controller for laser frequency stabilization based on the RedPitaya STEMlab 125-14 board

TU-Darmstadt-APQ/RedPitaya-IntStab
Digital controller for laser intensity stabilization based on the RedPitaya STEMlab 125-14 board


TU-Darmstadt-APQ/SFH203_photodetector
Low-noise transimpedance amplifier optimized for the photodiode SFH203.

TU-Darmstadt-APQ/Laser_Backplane_DVI
Laser backplane with DVI connector featuring fast current modulation and a laser diode protection.

TU-Darmstadt-APQ/Voltage_reference
LM399/ADR1399 based 10 V/15 V sub-ppm stable reference

TU-Darmstadt-APQ/DIN_41612_Backplane
19″ DIN 41612 Backplane. The basis for all rack mountable electronics used by APQ.

TU-Darmstadt-APQ/MTS_module
Module for AOM-based modulation transfer spectroscopy (MTS) signal generation.

TU-Darmstadt-APQ/LM399_Burnin_Board
An ADR399/LM399 voltage reference burnin board.

TU-Darmstadt-APQ/PDH-module
Produces a PDH error-signal using MiniCircuits SYPD-1+ phase detector and LT1568 4th order low-pass filter. To be used with a AD9959 DDS board.

TU-Darmstadt-APQ/MOT_Photodiode
The QUIPS C MOT photodiode transimpedance amplifier

TU-Darmstadt-APQ/phase-frequency_detector_switch_breakout
Front switch for the phase-frequency_detector


TU-Darmstadt-APQ/quips-c-uv-led
UV LEDs intended for QUIPS-C experiment, includes CAD-models of mount and PCB.