

Avionics STM32 Sensor Development Hardware
- Size
- 50 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 95
- Pads
- 364
- Tracks, vias
- 918, 190
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Feb 2018
- Updated
- 18 Feb 2018
Overview
AndromedaV1 is an open-source printed circuit board by StudentOrganisationForAerospaceResearch, from the StudentOrganisationForAerospaceResearch/Avionics-Andromeda repository on GitHub. It is a 4-layer board of 50 × 70 mm with 91 parts on 95 nets, routed with 918 tracks and 190 vias.
It is built around the STM32F405RGT6, FT230XS-R and LIS3DH, with the LSM9DS1 and MAX31856 among its other parts. Its parts include 33 capacitors, 23 resistors, 12 connectors, 8 ICs and 6 diodes. It belongs with the STM32 boards of this library.
Main components
5STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)FT230XS-R
SSOP-16-150mil-40℃~+85℃ 125uA 3.3V~5V 8mA USB 2.0 USB to UART SSOP-16-150mil USB Converters ROHSFTDIUSB ConvertersLIS3DH
LGA-16(3x3)-40℃~+85℃ 1.71V~3.6V 16bit 500nA Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-16(3x3) Accelerometers ROHSSTMicroelectronicsAccelerometersLSM9DS1
LGA-24(3x3.5)-40℃~+85℃ 1.9V~3.6V 16bit Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-24(3x3.5) Accelerometers ROHSSTMicroelectronicsAccelerometersMAX31856
UncategorisedMaxim Integrated (Analog Devices)
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 10K | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R9, R12, R13, R14, R15, R16, R17, R18, R19, R21, R22 |
| 13 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C5, C15, C16, C18, C20, C22, C25, C26, C27, C29, C30, C31, C32 |
| 5 | 10uF | Capacitor_SMD:C_0603_1608Metric | C4, C13, C21, C28, C33 |
| 5 | 330 | Resistor_SMD:R_0603_1608Metric | R3, R4, R5, R20, R23 |
| 4 | 10nF | Capacitor_SMD:C_0603_1608Metric | C3, C19, C23, C24 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C6, C8, C10, C11 |
| 4 | Mounting_Hole_PAD | MountingHole:MountingHole_3.2mm_M3_Pad | MK1, MK2, MK3, MK4 |
| 3 | 1uF | Capacitor_SMD:C_0603_1608Metric | C7, C9, C17 |
| 3 | Conn_01x04 | Conn_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8, J9, J13 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | 24pF | Capacitor_SMD:C_0603_1608Metric | C12, C14 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 47pF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Conn_01x06 | Conn_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J6, J7 |
| 2 | Conn_02x03_Odd_Even | Conn_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J11, J12 |
| 2 | Green | LED_SMD:LED_0805_2012Metric | D1, D4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D5, D6 |
| 1 | SOAR:LOGO_SOAR | LOGO_SOAR | |
| 1 | Barrel_Jack | SOAR:CUI_PJ-102A | J2 |
| 1 | Conn_01x02 | Conn_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_02x04_Odd_Even | Conn_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | Crystal_8MHz | Crystal:Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm | Y1 |
| 1 | FT230XS | Package_SSOP:SSOP-16_3.9x4.9mm_P0.635mm | U1 |
| 1 | Ferrite | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | LDO 3.3V | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | LDO 5V | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | LIS3DH | SOAR:LGA-16 | U5 |
| 1 | LSM9DS1 | Package_LGA:LGA-24L_3x3.5mm_P0.43mm | U7 |
| 1 | MAX31856 | Package_SSOP:TSSOP-14_4.4x5mm_P0.65mm | U6 |
| 1 | MS5607 | Package_LGA:LGA-8_3x5mm_P1.25mm | U8 |
| 1 | Micro_SD_Card | SOAR:Conn,Molex,Hinged_microSD | J4 |
| 1 | NMOS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Red | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | STM32F405R | Package_QFP:LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | SW_DIP_x04 | Button_Switch_SMD:SW_DIP_x4_W8.61mm_Slide_LowProfile | SW1 |
| 1 | Schottky | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | USB_MINIB | SOAR:USB-Mini-B | J1 |
Similar boards
- 2 layers86.1 × 66.3 mm

- 2 layers21.7 × 29.3 mm

- 4 layers78 × 78 mm

- 2 layers65 × 49 mm

- 2 layers58.4 × 101.6 mm

- 4 layers13.4 × 4.5 mm

Lre avio daq2
IITB-Rocket-Team-Avionics/Ember
Experimental Flight Computer with potential mitigations of previous issues faced by FLYTE and a testbed for new systems.
172 parts4MIT - 2 layers115 × 65 mm

- 4 layers90 × 43 mm

Temperature Thing With Thermocouple 3V3
spacebiz24/Thermal-Profiling
A Thermal Profiling Platform built with ATMega328P and MAX31856
89 parts3MPL-2.0
Questions
How big is the AndromedaV1 PCB?
It measures 50 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AndromedaV1 use?
91 parts, built around the STM32F405RGT6, FT230XS-R, LIS3DH and LSM9DS1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AndromedaV1 KiCad files?
From the StudentOrganisationForAerospaceResearch/Avionics-Andromeda repository on GitHub, at the commit this page was made from: the board is AndromedaV1/Kicad Design Files/AndromedaV1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AndromedaV1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask StudentOrganisationForAerospaceResearch before reusing the design.