

Temperature Thing With Thermocouple 3V3
A Thermal Profiling Platform built with ATMega328P and MAX31856
- Size
- 90 × 43 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 89
- Nets
- 74
- Pads
- 268
- Tracks, vias
- 520, 1,172
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Feb 2023
- Updated
- 20 Feb 2026
Overview
Temperature Thing With Thermocouple 3V3 is an open-source printed circuit board by spacebiz24, from the spacebiz24/Thermal-Profiling repository on GitHub, published under the MPL-2.0 licence. It is a 4-layer board of 90 × 43 mm with 89 parts on 74 nets, routed with 520 tracks and 1,172 vias.
It is built around the ATMEGA328P-AU, CH340G and CD4051BE, with the AMS1117-3.3, MAX31856 and USBLC6-2SC6 among its other parts. Its parts include 21 connectors, 18 capacitors, 15 resistors, 8 ICs and 6 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)CH340G
SOP-16-40℃~+85℃ 2Mbps 3.3V、5V USB 2.0 USB to UART SOP-16 USB Converters ROHSWCH (Nanjing Qinheng Microelectronics)USB ConvertersCD4051BE
PDIP-16-55℃~+125℃ 125Ω 20MHz 3V~20V 450ns 8 8:1 PDIP-16 Analog Switches, Multiplexers ROHSTexas InstrumentsAnalog Switches, MultiplexersAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsMAX31856
UncategorisedMaxim Integrated (Analog Devices)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)CG0402MLU-3.3G
0402-40℃~+125℃ 0.05pF 1 25V 3.3V 5nA ESD IEC 61000-4-2 0402 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
README
Hardware/README.mdHardware
This directory contains all the files concerning the project hardware, including the PCB and the overall casing.
Parts
89| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | ~ | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP11, TP12 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C7, C8, C13 |
| 7 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R6, R7, R14, R15 |
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R8, R9, R10, R11, R12, R13 |
| 6 | CG0402MLU-3.3G | CG402MLU-3_3G:CG402MLU-3_3G | RV1, RV2, RV3, RV4, RV5, RV6 |
| 4 | 22p | Capacitor_SMD:C_0603_1608Metric | C6, C9, C15, C16 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D3, D4 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C14, C17, C18 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C5, C10, C12 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R5 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D5, D6 |
| 2 | CD4051B | CD4051BPWR:CD4051BPWR | U3, U6 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C11 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U8 |
| 1 | ATMEGA328P-AU | ATMEGA328P-AU:ATMEGA328P-AU | U5 |
| 1 | B+ | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J16 |
| 1 | B- | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J20 |
| 1 | CH340G | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J21 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J18 |
| 1 | MAX31856 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U2 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | T1+ | Mounting Holes:M2-Plated-Hole | J1 |
| 1 | T1- | Mounting Holes:M2-Plated-Hole | J9 |
| 1 | T2+ | Mounting Holes:M2-Plated-Hole | J2 |
| 1 | T2- | Mounting Holes:M2-Plated-Hole | J10 |
| 1 | T3+ | Mounting Holes:M2-Plated-Hole | J3 |
| 1 | T3- | Mounting Holes:M2-Plated-Hole | J11 |
| 1 | T4+ | Mounting Holes:M2-Plated-Hole | J4 |
| 1 | T4- | Mounting Holes:M2-Plated-Hole | J12 |
| 1 | T5+ | Mounting Holes:M2-Plated-Hole | J5 |
| 1 | T5- | Mounting Holes:M2-Plated-Hole | J14 |
| 1 | T6+ | Mounting Holes:M2-Plated-Hole | J6 |
| 1 | T6- | Mounting Holes:M2-Plated-Hole | J15 |
| 1 | T7+ | Mounting Holes:M2-Plated-Hole | J7 |
| 1 | T7- | Mounting Holes:M2-Plated-Hole | J17 |
| 1 | T8+ | Mounting Holes:M2-Plated-Hole | J8 |
| 1 | T8- | Mounting Holes:M2-Plated-Hole | J19 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U7 |
| 1 | USB_B_Micro | USB Connectors:XKB-micro-USB | J13 |
| 1 | microSD Card | GCT-MICROSD-HOLDER:GCT-MICROSD-HOLDER | U4 |
Similar boards
- 12 layers92 × 92 mm

- 10 layers

- 10 layers90 × 60 mm

- 10 layers95.3 × 71.4 mm

- 2 layers90 × 85 mm

MultiBench
M-Mrk/MultiBench
A bench multimeter with the usual functions, but also with usb connectivity to log, stream and monitor readings.
87 parts1 - 4 layers102 × 49 mm

CURSO PCB DRONE
ArduProject/PCB_DRONE_C8
En este repositorio encontrareis los archivos de fabricación y las listas de montaje del PCB con STM32F103C8 que hemos visto en el curso.
153 parts1MIT - 2 layers25 × 99 mm

Cremini blade atmega328p
nicklasfrahm/mykilio
Mykilio is the proposal for a new Living Standard with the goal to reimagine infrastructure management and monitoring.
102 parts1MIT - 2 layers169.4 × 71 mm

Transmitter PCB
PrashantHalai-212/Transmitter_PCB
A Batman inspired Batarang shaped wireless transmitter board featuring an ATmega328P microcontroller, NRF24L01 module, and onboard CH340G USB programmer.
55 parts1MIT
Questions
How big is the Temperature Thing With Thermocouple 3V3 PCB?
It measures 90 × 43 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Temperature Thing With Thermocouple 3V3 use?
89 parts, built around the ATMEGA328P-AU, CH340G, CD4051BE and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Temperature Thing With Thermocouple 3V3 KiCad files?
From the spacebiz24/Thermal-Profiling repository on GitHub, at the commit this page was made from: the board is Hardware/Temperature Thing With Thermocouple 3V3.kicad_pcb and its schematic Hardware/Temperature Thing With Thermocouple 3V3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Temperature Thing With Thermocouple 3V3 design in my own project?
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).