
AndromedaV1
StudentOrganisationForAerospaceResearch/Avionics-Andromeda
Avionics STM32 Sensor Development Hardware

Andromeda V2.2 is an open-source printed circuit board by StudentOrganisationForAerospaceResearch, from the StudentOrganisationForAerospaceResearch/Andromeda-V2.2 repository on GitHub. It is a 2-layer board of 86.1 × 66.3 mm with 102 parts on 100 nets, routed with 917 tracks and 184 vias.
It is built around the STM32F405RGT6, FT230XS-R and LSM9DS1, with the TPS562200DDC among its other parts. Its parts include 34 capacitors, 26 connectors, 21 resistors, 7 ICs and 7 diodes. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TEST_1P | Connectors_TestPoints:Test_Point_Pad_d1.5mm | J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J13, J14, J15, J16, J17 |
| 12 | 0.1uF | Capacitors_SMD:C_0603 | C6, C8, C9, C21, C22, C24, C26, C27, C29, C30, C31, C33 |
| 7 | 10K | Resistors_SMD:R_0603 | R3, R4, R9, R10, R11, R12, R18 |
| 6 | 10uF | Capacitors_SMD:C_0603 | C4, C5, C7, C19, C28, C32 |
| 5 | 330 | Resistors_SMD:R_0603 | R5, R7, R8, R15, R16 |
| 4 | Mounting_Hole | Mounting_Holes:MountingHole_2.5mm_Pad | MK1, MK2, MK3, MK4 |
| 3 | 1uF | Capacitors_SMD:C_0603 | C12, C23, C35 |
| 3 | 2.2uF | Capacitors_SMD:C_0603 | C13, C16, C17 |
| 2 | 10nF | Capacitors_SMD:C_0603 | C3, C25 |
| 2 | 22uF | Capacitors_SMD:C_0603 | C10, C11 |
| 2 | 24pF | Capacitors_SMD:C_0603 | C18, C20 |
| 2 | 27 | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 47pF | Capacitors_SMD:C_0603 | C1, C2 |
| 2 | Green | LED_SMD:LED_0805_2012Metric | D1, D4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D5, D6 |
| 1 | SOAR_Kicad_Library:LOGO_SOAR | LOGO_SOAR | |
| 1 | 0.5nF | Capacitors_SMD:C_0603 | C34 |
| 1 | 100 | Resistors_SMD:R_0603 | R21 |
| 1 | 100K | Resistors_SMD:R_0603 | R13 |
| 1 | 10u | Capacitors_SMD:C_0603 | C36 |
| 1 | 133K | Resistors_SMD:R_0603 | R14 |
| 1 | 13K | Resistors_SMD:R_0603 | R19 |
| 1 | 200K | Resistors_SMD:R_0603 | R20 |
| 1 | 30K | Resistors_SMD:R_0603 | R17 |
| 1 | 4.7uH | SOAR_Kicad_Library:L_1008 | L1 |
| 1 | 54.9K | Resistors_SMD:R_0603 | R6 |
| 1 | AP2210-3.3 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | Battery | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J25 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J24 |
| 1 | Crystal_8MHz_18pf | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | D_Schottky_x2_KCom_AAK | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | D_TVS | Diodes_SMD:D_SOD-323 | D7 |
| 1 | FT230XS | Package_SO:SSOP-16_3.9x4.9mm_P0.635mm | U1 |
| 1 | GPS | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J18 |
| 1 | Ground Systems | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J26 |
| 1 | INA326 | Housings_SSOP:MSOP-8_3x3mm_Pitch0.65mm | U8 |
| 1 | LSM9DS1 | Package_LGA:LGA-24L_3x3.5mm_P0.43mm | U7 |
| 1 | Low Pressure | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J23 |
| 1 | MS5607 | Package_LGA:LGA-8_3x5mm_P1.25mm | U6 |
| 1 | Micro_SD_Card | SOAR_Library:Hirose_DM3AT-SF-PEJM5_MicroSD | J12 |
| 1 | Propulsion | SOAR_Library:Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal | J21 |
| 1 | Radio | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J19 |
| 1 | Recovery | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J20 |
| 1 | Red | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | STM32F405R | Package_QFP:LQFP-64_10x10mm_P0.5mm | U5 |
| 1 | TPS562200 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | Tank Pressure | SOAR_Kicad_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J22 |
| 1 | USB_MINIB | SOAR_Kicad_Library:USB-Mini-B | J1 |

StudentOrganisationForAerospaceResearch/Avionics-Andromeda
Avionics STM32 Sensor Development Hardware

StudentOrganisationForAerospaceResearch/Andromeda-V3
Flight Board with Daughter (Sensor) Board


rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.

bastian-bou/NixieNTPClock
Nixie clock around ESP32 connected to a NTP server

vatsalbansal123/reaction-wheel-controller-pcb
Open-source FOC motor controller PCB for a reaction wheel — STM32G431 + DRV8311H driving a BLDC motor, with CAN bus interface. Designed in KiCad.

nyuad-space/dumpling
Modular payload for high-speed logging and benchmarking of COTS sensors, enabling real-world performance data and open sharing.

It measures 86.1 × 66.3 mm and has 2 copper layers, 1.6 mm thick.
102 parts, built around the STM32F405RGT6, FT230XS-R, LSM9DS1 and TPS562200DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the StudentOrganisationForAerospaceResearch/Andromeda-V2.2 repository on GitHub, at the commit this page was made from: the board is AndromedaV2.2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask StudentOrganisationForAerospaceResearch before reusing the design.