
Sensor Board
StudentOrganisationForAerospaceResearch/Andromeda-V3
Flight Board with Daughter (Sensor) Board

Flight Board with Daughter (Sensor) Board
AndromedaV3 is an open-source printed circuit board by StudentOrganisationForAerospaceResearch, from the StudentOrganisationForAerospaceResearch/Andromeda-V3 repository on GitHub. It is a 2-layer board of 61.5 × 59.2 mm with 53 parts on 68 nets, routed with 609 tracks and 117 vias.
It is built around the STM32F405RGT6 and TPS562200DDC. Its parts include 20 capacitors, 9 resistors, 7 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Flight Board with Daughter (Sensor) Board
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 0.1uF | Capacitors_SMD:C_0603 | C4, C6, C14, C15, C17, C19 |
| 4 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitors_SMD:C_0603 | C1, C3, C12 |
| 3 | 2.2uF | Capacitors_SMD:C_0603 | C5, C9, C10 |
| 3 | 330 | Resistors_SMD:R_0603 | R5, R8, R9 |
| 3 | Conn_01x06 | SOAR_Library:PinHeader_1x06_P2.54mm_Vertical | J3, J4, J5 |
| 3 | TestPoint | SOAR_Library:TestPoint_Pad_D1.5mm | TP1, TP2, TP3 |
| 2 | 10k | Resistors_SMD:R_0603 | R1, R2 |
| 2 | 1uF | Capacitors_SMD:C_0603 | C2, C16 |
| 2 | 22uF | Capacitors_SMD:C_0603 | C7, C8 |
| 2 | 24pF | Capacitors_SMD:C_0603 | C11, C13 |
| 2 | LED | LEDs:LED_0805 | D2, D3 |
| 1 | SOAR_Library:LOGO_SOAR | LOGO_SOAR | |
| 1 | 10 | Resistors_SMD:R_0603 | R3 |
| 1 | 10K | Resistors_SMD:R_0603 | R7 |
| 1 | 10nF | Capacitors_SMD:C_0603 | C18 |
| 1 | 150u | Capacitors_Tantalum_SMD:CP_Tantalum_Case-D_EIA-7343-31_Reflow | C20 |
| 1 | 30K | Resistors_SMD:R_0603 | R6 |
| 1 | 4.7uH | SOAR_Library:L_1008 | L1 |
| 1 | 54.9k | Resistors_SMD:R_0603 | R4 |
| 1 | AP2210-3.3 | TO_SOT_Packages_SMD:SOT-23 | U1 |
| 1 | Conn_01x02 | SOAR_Library:TerminalBlock_5mm_2POS_ED2600 | J1 |
| 1 | Conn_01x04 | SOAR_Library:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J6 |
| 1 | Conn_01x08 | SOAR_Library:PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | Conn_02x12_Top_Bottom | SOAR_Library:Pin_Header_Straight_2x12_Pitch2.54mm | J7 |
| 1 | Crystal_8MHz_18pf | Crystals:Crystal_SMD_HC49-SD | Y1 |
| 1 | Green | LEDs:LED_0805 | D1 |
| 1 | Q_NMOS_GSD | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | STM32F405R | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U3 |
| 1 | TPS562200 | TO_SOT_Packages_SMD:SOT-23-6 | U2 |

StudentOrganisationForAerospaceResearch/Andromeda-V3
Flight Board with Daughter (Sensor) Board



rmingon/Falcon-Edge
A 3D-printable flying-wing airframe with a custom ESP32 flight computer—open hardware you can solder, screw together, and fly.

bastian-bou/NixieNTPClock
Nixie clock around ESP32 connected to a NTP server

vatsalbansal123/reaction-wheel-controller-pcb
Open-source FOC motor controller PCB for a reaction wheel — STM32G431 + DRV8311H driving a BLDC motor, with CAN bus interface. Designed in KiCad.

nyuad-space/dumpling
Modular payload for high-speed logging and benchmarking of COTS sensors, enabling real-world performance data and open sharing.


rmingon/PickOMatic-V2
One board to drive your entire pick-and-place machine: RISC-V CH32V317, 7 stepper channels, Ethernet, USB-C, vacuum and lighting control. Open hardware.
It measures 61.5 × 59.2 mm and has 2 copper layers, 1.6 mm thick.
53 parts, built around the STM32F405RGT6 and TPS562200DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the StudentOrganisationForAerospaceResearch/Andromeda-V3 repository on GitHub, at the commit this page was made from: the board is AndromedaV3/AndromedaV3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask StudentOrganisationForAerospaceResearch before reusing the design.