
Electrolama tinyreflowcontroller tiny reflow controller
oomlout/oomlout_oomp_project_bot_v_2

PCB for running a kiln from a Raspberry Pi
KilnHat is an open-source printed circuit board by tanaes, from the tanaes/KilnHat repository on GitHub, published under the MIT licence. It is a 2-layer board of 65 × 49 mm with 48 parts on 52 nets, routed with 358 tracks and 12 vias.
It is built around the MAX31856, 1N4148WS and AO3400A. Its parts include 14 resistors, 9 diodes, 9 connectors, 5 capacitors and 3 transistors.
PCB for running a kiln from a Raspberry Pi.
Has three MOSFET channels for controlling a mechanical safety relay, an SSR, and a fan. On-board thermocouple amplifier. Includes outputs for digital displays, addressable LEDs, and an I2C port.
This is not yet a true 'hat' as I haven't yet implemented the full requirements! However, my goal is to test the initial prototypes and add the required I2C EEPROM and over-voltage protection circuitry in a subsequent revision.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R8, R9, R12, R13, R14 |
| 5 | 100 | Resistor_SMD:R_0603_1608Metric | R4, R5, R6, R10, R11 |
| 3 | .1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5 |
| 3 | 1N4148WS | Diode_SMD:D_SOD-323 | D7, D8, D9 |
| 3 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3 |
| 3 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3 |
| 3 | D_Schottky | Diode_SMD:D_SMA | D1, D2, D3 |
| 3 | LED | LED_SMD:LED_0603_1608Metric | D4, D5, D6 |
| 2 | .01uF | Capacitor_SMD:C_0603_1608Metric | C1, C3 |
| 1 | 12V PS in | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | 5V PS in | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | Disp1 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J6 |
| 1 | Disp2 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J7 |
| 1 | DotStar | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | I2C | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J9 |
| 1 | Jumper_3_Bridged12 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | MAX31856 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Screw_Terminal_01x06 | TerminalBlock:TerminalBlock_bornier-6_P5.08mm | J3 |
The 42 most common of 48 parts.

oomlout/oomlout_oomp_project_bot_v_2

TobleMiner/DC-UPS
A small DC UPS, designed to keep small appliances like consumer network equipment running during power outages

Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

Arkos-Engineering/HT-15_hardware
We can split this out into separate repos later, right now its very convenient to have everything here.



OpenLogicEFI/Hardware
Hardware is based off an open source project called Speeduino by Josh Stewart.

It measures 65 × 49 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the MAX31856, 1N4148WS and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the tanaes/KilnHat repository on GitHub, at the commit this page was made from: the board is KilnHat/KilnHat.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).