
Ear
CubeEarthWorld/Open-Binaural-Microphone
Open-source design data for the Xignal Bicarus1 binaural microphone

Open-source design data for the Xignal Bicarus1 binaural microphone
Binaural Microphone is an open-source printed circuit board by CubeEarthWorld, from the CubeEarthWorld/Open-Binaural-Microphone repository on GitHub. It is a 2-layer board of 65 × 40 mm with 46 parts on 26 nets, routed with 155 tracks and 26 vias.
It is built around the MCP6022-I/P, ADP151AUJZ-3.3-R7 and PJ-324. Its parts include 24 resistors, 9 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the audio and music boards of this library.
English | 日本語 | 简体中文 | 한국어 | Русский | Deutsch | Español
This repository contains open-source design data for the Xignal Bicarus1 binaural microphone, sold by Xignal Tech.
Circuits/ — KiCad 10.0 project files (schematics, PCB layout, BOM, production data)The original design content in this repository (schematics, PCB layouts, documentation) is licensed under the MIT No Attribution (MIT-0) License. This means you are free to use, modify, manufacture, and sell it without any attribution requirement.
Note on KiCad compatibility: This project uses KiCad library symbols and footprints, which are licensed under CC-BY-SA 4.0. In accordance with the KiCad Library Design Exception, designs created using these library elements are not considered derivative works and are not subject to the ShareAlike requirement. The MIT-0 License is therefore compatible and applies to all original schematic connectivity, PCB layout, and documentation.
See LICENSE for the full license text.
本リポジトリでは、Xignal Tech にて販売しているバイノーラルマイク Xignal Bicarus1 の設計データの一部をオープンソースで公開しています。
Circuits/ — KiCad 10.0 プロジェクトファイル(回路図、PCBレイアウト、BOM、製造データ)本リポジトリのオリジナル設計データ(回路図、PCBレイアウト、ドキュメント)は、MIT No Attribution(MIT-0)ライセンスの下で提供されています。これにより、著作権表記の義務なく、自由に使用・改変・製造・販売することができます。
KiCad ライブラリに関する注記: 本プロジェクトでは、CC-BY-SA 4.0 でライセンスされている KiCad ライブラリのシンボルおよびフットプリントを使用しています。KiCad ライブラリの Design Exception に基づき、これらのライブラリ要素を使用して作成されたデザインは派生物とみなされず、ShareAlike 条項の対象とはなりません。したがって、本プロジェクトのオリジナル部分(回路の結線、PCB レイアウト、ドキュメント)には MIT-0 ライセンスが適用されます。
詳細は LICENSE ファイルをご確認ください。
本仓库以开源方式发布了由 Xignal Tech 销售的 Xignal Bicarus1 双耳麦克风的部分设计数据。
Circuits/ — KiCad 10.0 项目文件(原理图、PCB 布局、BOM、生产数据)本仓库中的原创设计内容(原理图、PCB 布局、文档)采用 MIT No Attribution(MIT-0)许可证。这意味着您可以自由使用、修改、制造和销售,且无需任何署名要求。
关于 KiCad 库的说明:本项目使用了以 CC-BY-SA 4.0 许可的 KiCad 库符号和封装。根据 KiCad 库设计例外(Design Exception) 条款,使用这些库元素生成的设计不被视为衍生作品,因而不受 ShareAlike 条款约束。因此,本项目的原创部分(原理图连接、PCB 布局、文档)适用 MIT-0 许可证。
完整许可文本请参阅 LICENSE 文件。
본 저장소는 Xignal Tech에서 판매 중인 바이노럴 마이크 Xignal Bicarus1의 설계 데이터 일부를 오픈소스로 공개하고 있습니다.
Circuits/ — KiCad 10.0 프로젝트 파일 (회로도, PCB 레이아웃, BOM, 생산 데이터)본 저장소의 독창적인 설계 콘텐츠(회로도, PCB 레이아웃, 문서)는 MIT No Attribution(MIT-0) 라이선스로 제공됩니다. 이에 따라 저작자 표시 의무 없이 자유롭게 사용, 수정, 제조 및 판매할 수 있습니다.
KiCad 라이브러리 관련 참고: 본 프로젝트는 CC-BY-SA 4.0으로 라이선스가 부여된 KiCad 라이브러리 심볼 및 풋프린트를 사용합니다. KiCad 라이브러리 Design Exception에 따라, 이러한 라이브러리 요소를 사용하여 생성된 설계물은 파생 저작물로 간주되지 않으며, ShareAlike 조항의 적용을 받지 않습니다. 따라서 본 프로젝트의 독창적인 부분(회로 연결, PCB 레이아웃, 문서)에는 MIT-0 라이선스가 적용됩니다.
자세한 내용은 LICENSE 파일을 확인해 주십시오.
В этом репозитории публикуются данные для проектирования бинаурального микрофона Xignal Bicarus1, продаваемого компанией Xignal Tech.
Circuits/ — Файлы проекта KiCad 10.0 (принципиальные схемы, разводка плат, спецификация, производственные данные)Оригинальный контент данного репозитория (схемы, разводка плат, документация) распространяется по лицензии MIT No Attribution (MIT-0). Это означает, что вы можете свободно использовать, изменять, производить и продавать его без каких-либо требований об указании авторства.
Примечание о библиотеках KiCad: В данном проекте используются библиотечные символы и посадочные места KiCad, лицензированные по CC-BY-SA 4.0. В соответствии с Design Exception библиотек KiCad, проекты, созданные с использованием этих библиотечных элементов, не считаются производными работами и не подпадают под требование ShareAlike. Таким образом, лицензия MIT-0 применяется ко всем оригинальным частям проекта (схемотехника, разводка плат, документация).
Полный текст лицензии см. в файле LICENSE.
Dieses Repository enthält Open-Source-Designdaten für das binaurale Mikrofon Xignal Bicarus1, das von Xignal Tech vertrieben wird.
Circuits/ — KiCad 10.0 Projektdateien (Schaltpläne, PCB-Layout, Stückliste, Fertigungsdaten)Die ursprünglichen Designinhalte in diesem Repository (Schaltpläne, PCB-Layouts, Dokumentation) sind unter der MIT No Attribution (MIT-0)-Lizenz veröffentlicht. Das bedeutet, dass Sie sie ohne jegliche Namensnennungspflicht frei verwenden, ändern, herstellen und verkaufen dürfen.
Hinweis zu KiCad-Bibliotheken: Dieses Projekt verwendet KiCad-Bibliothekssymbole und Footprints, die unter CC-BY-SA 4.0 lizenziert sind. Gemäß der KiCad Design Exception gelten mit diesen Bibliothekselementen erstellte Designs nicht als abgeleitete Werke und unterliegen nicht der ShareAlike-Anforderung. Daher gilt die MIT-0-Lizenz für alle originalen Teile dieses Projekts (Schaltplan-Verbindungen, PCB-Layout, Dokumentation).
Den vollständigen Lizenztext finden Sie in der Datei LICENSE.
Este repositorio contiene datos de diseño de código abierto para el micrófono binaural Xignal Bicarus1, comercializado por Xignal Tech.
Circuits/ — Archivos de proyecto KiCad 10.0 (esquemáticos, diseño de PCB, lista de materiales, datos de producción)El contenido de diseño original de este repositorio (esquemas, diseños de PCB, documentación) está licenciado bajo la Licencia MIT No Attribution (MIT-0). Esto significa que puede usarlo, modificarlo, fabricarlo y venderlo libremente sin ningún requisito de atribución.
Nota sobre las bibliotecas de KiCad: Este proyecto utiliza símbolos y huellas de la biblioteca KiCad, que están licenciados bajo CC-BY-SA 4.0. De acuerdo con la Design Exception de KiCad, los diseños creados con estos elementos de biblioteca no se consideran obras derivadas y no están sujetos al requisito de ShareAlike. Por lo tanto, la Licencia MIT-0 se aplica a todas las partes originales de este proyecto (conexiones esquemáticas, diseño de PCB, documentación).
Consulte el archivo LICENSE para el texto completo de la licencia.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 22K | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R22, R23, R24 |
| 4 | 1K | Resistor_SMD:R_1206_3216Metric | R4, R6, R15, R17 |
| 4 | 2.0k | Resistor_SMD:R_1206_3216Metric | R5, R7, R16, R18 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 100μF | Capacitor_SMD:CP_Elec_6.3x5.7 | C1, C4, C7 |
| 3 | 1μF | Capacitor_THT:C_Disc_D7.5mm_W4.4mm_P5.00mm | C3, C5, C8 |
| 2 | 100Ω | Resistor_SMD:R_0603_1608Metric | R14, R25 |
| 2 | 10μF | Capacitor_THT:C_Radial_D8.0mm_H11.5mm_P3.50mm | C6, C9 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R10, R21 |
| 2 | 3.9K | Resistor_SMD:R_0603_1608Metric | R9, R20 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | EM419N | Connector_JST:JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J2, J3 |
| 1 | 0.1μF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 0Ω | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ADP151AUJZ-3.3-R7 | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | B5819W SL | Diode_SMD:D_SOD-123 | D1 |
| 1 | FerriteBead_Small | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | MCP6022 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PJ-324 | Library:PJ_324 | AJ-1 |
| 1 | Polyfuse_Small | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | USB | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |

CubeEarthWorld/Open-Binaural-Microphone
Open-source design data for the Xignal Bicarus1 binaural microphone


thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules

cactorium/UCFBrainStuff
EEG software, alpha stages. Will be opensourced when it's working!



rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2

arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.

botanicfields/KiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
It measures 65 × 40 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the MCP6022-I/P, ADP151AUJZ-3.3-R7 and PJ-324. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the CubeEarthWorld/Open-Binaural-Microphone repository on GitHub, at the commit this page was made from: the board is Circuits/Main/Binaural_Microphone.kicad_pcb and its schematic Circuits/Ear/Ear.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask CubeEarthWorld before reusing the design.