2 layers45.7 × 17.8 mm
Bf-039
botanicfields/KiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
17 parts5CC0-1.0
2 layers58.4 × 36.8 mm
My symbols, my footprints, my templates, etc. of KiCad6
- Size
- 58.4 × 36.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 19
- Pads
- 54
- Tracks, vias
- 84, 29
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 22 Oct 2022
- Updated
- 17 Dec 2022
Overview
Bf-018a is an open-source printed circuit board by botanicfields, from the botanicfields/KiCad6-Environment repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 58.4 × 36.8 mm with 22 parts on 19 nets, routed with 84 tracks and 29 vias.
It is built around the MCP6022-I/P. Its parts include 8 capacitors, 8 resistors, 2 ICs and 1 inductor.
Main components
1README
README.mdKiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
KiCad6 による基板の設計時に作成したライブラリやテンプレートを置いています。
1．symbols
「シンボルエディター」で作成したシンボルのライブラリです。
(1) @bf.kicad_sym
使用しているシンボルのうち、独自に作成したシンボルの全てを含みます。
2．footprints
「フットプリントエディター」で作成したフットプリントのライブラリです。
(1) @bf.pretty
使用しているフットプリントのうち、独自に作成したフットプリントの全てを含みます。
3．template
「KiCadマネージャー」において「テンプレートから新規プロジェクトを作成..」で選択可能となる「ユーザーテンプレート」のデータです。
(1) M5Stack_module
M5Stack用のモジュール基板のテンプレートです。M-BUSのピンヘッダーとピンソケットの両方を備え、モジュールの積み重ねに対応します。フレームにはM5Stack社のPROTOモジュールのモールドを流用することを想定しています。
- 基板の厚さは1mmです
(2) M5Stack_module_fdm
M5Stack用のモジュール基板のテンプレートです。M-BUSのピンヘッダーとピンソケットの両方を備え、モジュールの積み重ねに対応します。フレームにはFDMによるモールドを使用することを想定し、四隅に逃げがあります。
- 基板の厚さは1mmです
- FDM: Fused Deposition Modeling
(3) M5Stack_bottom_fdm
M5Stack用のボトム基板のテンプレートです。M-BUSのピンヘッダーがありますがピンソケットはありません。フレームにはFDMによるモールドを使用することを想定し、四隅に逃げがあります。
- FDM: Fused Deposition Modeling
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C7 |
| 3 | 51k | Resistor_SMD:R_0603_1608Metric | R3, R4, R6 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C8 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R7 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm | H1, H2 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C1 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 510 | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | JJY_coil | @bf:BF@JJY_Coil | L1 |
| 1 | LOGO | BF:BF@logo4 | G*** |
| 1 | M5Atom | @bf:BF@M5Atom | U2 |
| 1 | MCP6022 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
More from botanicfields/KiCad6-Environment
3- 2 layers50 × 50 mm
M5Stack bottom fdm
botanicfields/KiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
9 parts5CC0-1.0 - 2 layers50 × 50 mm
M5Stack module fdm
botanicfields/KiCad6-Environment
My symbols, my footprints, my templates, etc. of KiCad6
9 parts5CC0-1.0
Similar boards
- 2 layers50.8 × 107.9 mm
- 2 layers20.3 × 110 mm
4HPico
rheslip/2HPico-Eurorack-Module-Hardware
2HP Eurorack module based on Raspberry Pi Pico 2
73 parts84 - 2 layers377.2 × 318 mm
Three phase bridge
arcoslab/open-coroco-legacy
COmpliant RObot COntroller is a free software project aiming to create an impedance controller based on a stm32 microcontroller using bldc motors and strain gauges.
105 parts6 - 4 layers70 × 60 mm
Tanklevel
Th3Link/tanklevel
This project provides a solution for measuring the liquid level in tanks, such as rainwater tanks, using the TL-136 pressure sensor.
80 parts4CERN-OHL-S-2.0 - 2 layers113 × 86.7 mm
SiC based Battery Disconnect
abhinav937/SiC-Based-Bi-Directional-Circuit-breaker
KiCad 7 PCB design files for E_Fuse
138 parts2 - 2 layers43.8 × 58 mm
Pi hat
fodorbalint/OneWayLabyrinth
Program aiming to solve the one-way labyrinth generation riddle.
53 parts1 - 4 layers35 × 35 mm
- 2 layers60.5 × 85.5 mm
Line Sensor Board
re3Dev/Extrusion-Metrology
PCB with a main purpose of a low-cost, dedicated 1D metrology sensor specifically for a Klipper printer, use controlled illumination to get a high-resolution bead cross-section without running full machine vision, and…
31 parts1
Questions
How big is the Bf-018a PCB?
It measures 58.4 × 36.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bf-018a use?
22 parts, built around the MCP6022-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bf-018a KiCad files?
From the botanicfields/KiCad6-Environment repository on GitHub, at the commit this page was made from: the board is 6.0/projects/bf-018a/bf-018a.kicad_pcb and its schematic 6.0/projects/bf-018a/bf-018a.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bf-018a design in my own project?
Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).