Skip to the content
12345

ADP151AUJZ-3.3-R7

Analog DevicesExtended

-40℃~+125℃ 1 200mA 230mV@(200mA) 3.3V 5.5V 55dB@(100kHz)、70dB@(10kHz) 9uVrms Fixed Over Current Protection Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADP151AUJZ-3.3-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
TSOT-23-5
Pins
5
In stock
5,581 at JLCPCB (C61006)
Used on
7 open-source boards

Overview

The ADP151AUJZ-3.3-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a TSOT-23-5 package with 5 pins. -40℃~+125℃ 1 200mA 230mV@(200mA) 3.3V 5.5V 55dB@(100kHz)、70dB@(10kHz) 9uVrms Fixed Over Current Protection Positive TSOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:TSOT-23-5, from KiCad's library), ready for a KiCad board. 5,581 are in stock at JLCPCB (part C61006). 7 open-source boards in 5 repositories on GitHub use it.

Symbol

IN1EN3OUT5GND2
Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUTFrom PCBKit's generic symbols

Footprint

12345
Package_TO_SOT_SMD:TSOT-23-5From KiCad's library

Pinout

5
The pins of the ADP151AUJZ-3.3-R7
PinNameType
1INPower in
2GNDPower in
3ENInput
4NCNot connected
5OUTPower out

Open-source boards using it

7
  • 2 layers44.9 × 47.2 mmIsc0901b0-breakout, the printed circuit board in 3D

    Isc0901b0-breakout

    festlv/isc0901b0-breakout

    Simple breakout board for ISC0901B0 sensor

    60 parts15MIT
  • 6 layers228.6 × 110.7 mmDriver, the printed circuit board in 3D

    Driver

    thewonderidiot/lachesis

    Portable, safe readers for Apollo Guidance Computer core rope memory modules

    690 parts4MIT
  • 2 layers161.5 × 90.2 mmMaster, the printed circuit board in 3D

    Master

    cactorium/UCFBrainStuff

    EEG software, alpha stages. Will be opensourced when it's working!

    117 partsMIT
  • 2 layers65 × 40 mmBinaural Microphone, the printed circuit board in 3D

    Binaural Microphone

    CubeEarthWorld/Open-Binaural-Microphone

    Open-source design data for the Xignal Bicarus1 binaural microphone

    46 parts
  • 2 layers83.5 × 61.8 mmSensors, the printed circuit board in 3D

    Sensors

    cactorium/UCFBrainStuff

    EEG software, alpha stages. Will be opensourced when it's working!

    41 partsMIT
  • 2 layers40.4 × 54.2 mmServos, the printed circuit board in 3D

    Servos

    cactorium/UCFBrainStuff

    EEG software, alpha stages. Will be opensourced when it's working!

    22 partsMIT
  • 4 layers125 × 50.1 mmD lev io, the printed circuit board in 3D

    D lev io

    wormyrocks/d-lev-mini

    155 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADP151AUJZ-3.3-R7?

Yes. The symbol is Pinmap_Generic:Regulator_Linear_1IN_2GND_3EN_4NC_5OUT and the footprint Package_TO_SOT_SMD:TSOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADP151AUJZ-3.3-R7?

TSOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the ADP151AUJZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADP151AUJZ-3.3-R7?

JLCPCB lists it as part C61006, with 5,581 in stock; the sellers' links on this page open their listings.

What can replace the ADP151AUJZ-3.3-R7?

Parts like it in the library: the ME6211C33M5G-N by MICRONE, the SPX3819M5-L-3-3/TR by MaxLinear, the RT9013-33GB by RICHTEK and the XC6219B332MR by UMW. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADP151AUJZ-3.3-R7?

7 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.