

Teensy breakout
repository for CAD(s) for PCB(s) for Robobuggy.
- Size
- 139.7 × 133.4 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 138
- Pads
- 436
- Tracks, vias
- 674, 44
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Dec 2024
- Updated
- 2 Feb 2025
Overview
Teensy breakout is an open-source printed circuit board by CMU-Robotics-Club, from the CMU-Robotics-Club/robobuggy-pcb repository on GitHub. It is a 6-layer board of 139.7 × 133.4 mm with 90 parts on 138 nets, routed with 674 tracks and 44 vias.
It is built around the TEENSY 4.1, FT232RL and LSF0102DCUR, with the 7101MD9AQE and IRL530NSTRLPBF among its other parts. Its parts include 23 capacitors, 22 connectors, 16 resistors, 9 ICs and 4 diodes. It belongs with the interfaces and adapters boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
5TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedFT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersLSF0102DCUR
VSSOP-8-0.5mm-40℃~+125℃ 1 1.8V~5.5V 2 950mV~4.5V Automatic direction detection、Output enable high-impedance Bidirectional Level translator Push-Pull、Open-drain SMBus、I2C、UART TTL TTL VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters7101MD9AQE
插件插件 Toggle Switches ROHSC&KToggle SwitchesIRL530NSTRLPBF
TO-263-2-55℃~+175℃ 1 N-channel 100V 150mΩ@4V 160pF 17A 2V 79W 800pF 90pF N-Channel TO-263-2 MOSFETs ROHSInfineon TechnologiesMOSFETs
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C7, C8, C13, C14, C16, C21, C23, C24 |
| 10 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C6, C12, C15, C17, C18, C19, C20, C22, C25 |
| 10 | Conn_01x04 | Connector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11, J14, J15 |
| 5 | Conn_01x03 | Connector_JST:JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical | J13, J19, J20, J21, J22 |
| 4 | 2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R11, R12 |
| 4 | LOGO | LOGO | G***, G***, G***, G*** |
| 2 | 100u | Custom:CAP_A765EB_KEM | C1, C2 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R17 |
| 2 | 200k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R15, R16 |
| 2 | 270 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | BLUE | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | Conn_01x02 | Connector_AMASS:AMASS_XT30UPB-M_1x02_P5.0mm_Vertical | J2, J3 |
| 2 | Conn_01x08 | Custom:PHOENIX_1989010 | J17, J18 |
| 2 | LSF0102DCUR | Custom:DCU0008A_M | U7, U10 |
| 1 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 120 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 500 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7 |
| 1 | 7101MD9AQE | Custom:SW3_7101MD9AQE_CNK | SW1 |
| 1 | Adafruit_Feather_M0_RFM9x_LoRa_Radio | Module:Adafruit_Feather_M0_RFM | A1 |
| 1 | Conn_01x02 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J16 |
| 1 | Conn_01x05 | Connector_JST:JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical | J12 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U3 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric | D4 |
| 1 | ICL7667CBAZA-TDKR | Custom:SOIC8_4X5_INR | U6 |
| 1 | IRL530NSTRLPBF | Custom:IRL530NSTRLPBF_INF | Q1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | MBRD10100CT-13 | Custom:TO252DPAK_DIO | CR2 |
| 1 | Teensy4.1 | Teensy 4.1:Teensy41 | U1 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J1 |
| 1 | ~ | Custom:ZED F9P RTK SMA | U4 |
| 1 | ~ | Custom:Pololu D36V50F5 | U9 |
| 1 | ~ | Custom:BNO085 | U2 |
| 1 | ~ | Custom:RFM69HCW Adafruit Breakout | U5 |
The 82 most common of 90 parts.
Similar boards
- 4 layers86.9 × 91.9 mm

- 2 layers83.8 × 94.6 mm

- 4 layers108.5 × 92.8 mm

- 2 layers50.8 × 22.9 mm

- 2 layers100 × 84.7 mm

MotorSignalConversion
WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project
30 parts1 - 2 layers73.7 × 101.6 mm

- 2 layers118.1 × 101.6 mm

Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
102 parts259MIT - 2 layers240 × 240 mm

Questions
How big is the Teensy breakout PCB?
It measures 139.7 × 133.4 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Teensy breakout use?
90 parts, built around the TEENSY 4.1, FT232RL, LSF0102DCUR and 7101MD9AQE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teensy breakout KiCad files?
From the CMU-Robotics-Club/robobuggy-pcb repository on GitHub, at the commit this page was made from: the board is teensy-breakout/teensy-breakout.kicad_pcb and its schematic teensy-breakout/teensy-breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teensy breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask CMU-Robotics-Club before reusing the design.