
SensorMicrocontroller
WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project

The PCB designs for the wheelchair for our senior design project
MotorSignalConversion is an open-source printed circuit board by WheelchairSeniorDesign, from the WheelchairSeniorDesign/PCBs repository on GitHub. It is a 2-layer board of 100 × 84.7 mm with 30 parts on 68 nets, routed with 303 tracks and 66 vias.
It is built around the SC0915, LM324PWRG and LSF0102DCUR, with the CC0805KRX7R9BB104, CRCW08054K70FKEAC and B4B-PH-SM4-TB among its other parts. Its parts include 11 resistors, 5 ICs, 4 capacitors and 4 connectors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | H1, H2, H3, H4 |
| 2 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric | C4, C6 |
| 2 | 10 uF | Capacitor_SMD:C_0805_2012Metric | C3, C5 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R8, R11 |
| 2 | 2.1K | Resistor_SMD:R_0805_2012Metric | R4, R6 |
| 2 | 4.7K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 900 | Resistor_SMD:R_0805_2012Metric | R3, R5 |
| 2 | Conn_01x02 | Connector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical | J2, J5 |
| 2 | Conn_01x06_MountingPin | Connector_JST:JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal | J1, J3 |
| 2 | MCP4725xxx-xCH | Package_TO_SOT_SMD:SOT-23-6 | U2, U3 |
| 1 | 200K | Resistor_SMD:R_0805_2012Metric | R7 |
| 1 | 820K | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 91K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | LM324 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U4 |
| 1 | LOGO | LOGO | G*** |
| 1 | LOGO | Footprints:LeopardPawFootprint | G*** |
| 1 | LSF0102DCUR | Package_SO:VSSOP-8_2.3x2mm_P0.5mm | U5 |
| 1 | SC0915 | foot:pico | U1 |

WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project

WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project

WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project

WheelchairSeniorDesign/PCBs
The PCB designs for the wheelchair for our senior design project

jackw01/ripplecounter
Sensorless brushed DC motor position control with Raspberry Pi Pico

Lafayette-Motorsports/LVBoards
LV Board repository for Motorsports created 09.02.2025

Yexall/CPE-450.Capstone
Fall 24 - Winter 25 Cal Poly Capstone project by Haas Hooligans. This projects aims to build a machine monitoring system for the Cal Poly IME department.


alegoldstein/NUSTARS
Payload PCB for Northwestern University's 2025-2026 IREC rocket



It measures 100 × 84.7 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the SC0915, LM324PWRG, LSF0102DCUR and CC0805KRX7R9BB104. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the WheelchairSeniorDesign/PCBs repository on GitHub, at the commit this page was made from: the board is MotorSignalConversion/MotorSignalConversion.kicad_pcb and its schematic Joystick/JoystickPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask WheelchairSeniorDesign before reusing the design.