2 layers68.8 × 53.6 mm
ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269
FT232RL
FTDIExtended
-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHS
- Part id
- ftdi/FT232RL
- Category
- USB Converters
- Package
- SSOP-28-208mil
- Pins
- 28
- In stock
- 0 at JLCPCB (C490691)
- Used on
- 345 open-source boards
Overview
The FT232RL is a USB Converter made by FTDI in a SSOP-28-208mil package with 28 pins. -40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHS.
PCBKit's library has its KiCad symbol (Analog & Interface:FT232RL, from CERN's library) and its footprint (Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C490691). 345 open-source boards in 304 repositories on GitHub use it.
Symbol
Footprint
Pinout
28| Pin | Name | Type |
|---|---|---|
| 1 | TxD | Output |
| 2 | DTR | Output |
| 3 | RTS | Output |
| 4 | VCCIO | Power in |
| 5 | RxD | Input |
| 6 | RI | Input |
| 7 | GND | Power in |
| 8 | NC | Passive |
| 9 | DSR | Input |
| 10 | DCD | Input |
| 11 | CTS | Input |
| 12 | CBUS4 | Input/output |
| 13 | CBUS2 | Input/output |
| 14 | CBUS3 | Input/output |
| 15 | USBDP | Input/output |
| 16 | USBDM | Input/output |
| 17 | 3V3OUT | Output |
| 18 | GND | Power in |
| 19 | RESET | Input |
| 20 | VCC | Power in |
| 21 | GND | Power in |
| 22 | CBUS1 | Input/output |
| 23 | CBUS0 | Input/output |
| 24 | NC | Passive |
| 25 | AGND | Power in |
| 26 | TEST | Input |
| 27 | OSCI | Input |
| 28 | OSCO | Output |
- 2 layers80.1 × 56.9 mm
- 2 layers45 × 69 mm
- 2 layers100 × 71.8 mm
- 2 layers132.5 × 38 mm
Emfi
Ledger-Donjon/silicon-toaster
SiliconToaster is an open-source hardware electromagnetic fault injection device, designed for hardware security research. It has the following features:
81 parts60LGPL-3.0 - 2 layers22 × 66.5 mm
- 2 layers104.7 × 55.6 mm
Lab1
jsjolund/dmx512-controller-board
Controller board for DMX512 compatible devices, built around the STM32F4 processor
96 parts26 - 2 layers95 × 85 mm
Parts like it
8
GL850G-HHY22
SSOP-28-208mil3V~3.6V、4.75V~5.25V 480Mbps 70mA Hub USB 2.0 SSOP-28-208mil USB HUB Controllers ROHSGENESYSUSB ConvertersFT232RNL-REEL
SSOP-28-40℃~+85℃ 15mA 3.3V~5.25V 70uA USB 2.0 USB to UART SSOP-28 USB Converters ROHSFTDIUSB ConvertersGL850G-HHY60
SSOP-28100mA 2.5mA 4 480Mbps Hub USB 2.0 SSOP-28 USB HUB Controllers ROHSGenesys LogicUSB ConvertersGL852G-HHY12
SSOP-280℃~+70℃ 100mA 2.5mA 4 4.5V~5.5V 480Mbps USB 2.0 SSOP-28 USB Converters ROHSGenesys LogicUSB ConvertersFT232RL-REEL-S
SSOP-28-40℃~+85℃ 1.8V~5.25V、3.3V~5.25V 15mA 3Mbps 70uA USB 2.0 USB to UART SSOP-28 USB Converters ROHSJSMSEMIUSB ConvertersPL2303GC
SSOP-28-40℃~+85℃ 12Mbps 3.3V USB 2.0 USB to UART SSOP-28 USB Converters ROHSProlific TechUSB ConvertersFT232RL-REEL
SSOP-28-208mil-40℃~+85℃ 15mA 3.3V~5.25V 3Mbps 70uA USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersFT245RL-REEL
SSOP-28-208mil-40℃~+85℃ 1.8V~5.25V 15mA 70uA USB 2.0 USB to FIFO SSOP-28-208mil USB Converters ROHSFTDIUSB Converters
Questions
Is there a KiCad symbol and footprint for the FT232RL?
Yes. The symbol is Analog & Interface:FT232RL and the footprint Package_SO:SSOP-28_5.3x10.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the FT232RL?
SSOP-28-208mil, with 28 pins. Its footprint is drawn on this page.
Where is the FT232RL datasheet?
FTDI publishes it: the Datasheet link on this page opens it.
Where can I order the FT232RL?
JLCPCB lists it as part C490691, with 0 in stock; the sellers' links on this page open their listings.
What can replace the FT232RL?
Parts like it in the library: the GL850G-HHY22 by GENESYS, the FT232RNL-REEL by FTDI, the GL850G-HHY60 by Genesys Logic and the GL852G-HHY12 by Genesys Logic. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the FT232RL?
345 boards in 304 repositories on GitHub; the most starred are listed on this page, with their KiCad files.