

GAINS PCB
Senior Design Code
- Size
- 73.7 × 101.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 79
- Nets
- 145
- Pads
- 343
- Tracks, vias
- 429, 46
- Pours
- 270
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Jan 2024
- Updated
- 26 Apr 2024
Overview
GAINS PCB is an open-source printed circuit board by ritter30, from the ritter30/senior-design repository on GitHub. It is a 2-layer board of 73.7 × 101.6 mm with 79 parts on 145 nets, routed with 429 tracks and 46 vias.
It is built around the TEENSY 4.1, FT232RL and MCP602-I/P, with the BNO055 among its other parts. Its parts include 27 resistors, 21 capacitors, 8 ICs, 4 diodes and 3 switches. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
4TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorisedFT232RL
SSOP-28-208mil-40℃~+85℃ 3.3V~5.25V、4V~5.25V USB 2.0 USB to UART SSOP-28-208mil USB Converters ROHSFTDIUSB ConvertersMCP602-I/P
PDIP-8-40℃~+85℃ 1pA 1pA 2 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 90dB Built-in compensation、ESD protection Rail-to-rail output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierBNO055
LGA-28(3.8x5.2)-40℃~+85℃ 2.4V~3.6V 40uA I2C、UART IMU X,Y,Z X,Y,Z ±16g ±2000dps LGA-28(3.8x5.2) Accelerometers ROHSBosch SensortecAccelerometers
README
README.mdG.A.I.N.S Team 19
Cameron Williams
Max Ritter
Mark Melvin
Aidan Leib
Documentation
All documentation for the project is located in ./docs.
Hyperlinks to frequently used:
- Git Commands Cheat Sheet
- etc...
Parts
79| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201, R207, R403, R404, R501, R502, R503, R504, R601, R602, R603, R604, R703 |
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C204, C401, C402, C403, C404, C405, C501, C502, C601, C602, C701, C702 |
| 7 | TestPoint | Connector_PinHeader_1.27mm:PinHeader_1x01_P1.27mm_Vertical | TP201, TP202, TP203, TP204, TP205, TP206, TP401 |
| 4 | 22p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C503, C504, C603, C604 |
| 3 | D_Schottky | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D201, D202, D203 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R401, R402 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C202, C205 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R405, R406 |
| 2 | 470 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R701, R702 |
| 2 | BNO055 | Package_LGA:LGA-28_5.2x3.8mm_P0.5mm | U501, U601 |
| 2 | Crystal | Crystal:Crystal_DS26_D2.0mm_L6.0mm_Vertical | Y501, Y601 |
| 1 | 100u | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C206 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C201 |
| 1 | 160k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R206 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R202 |
| 1 | 2.2u | Inductor_THT:L_Radial_D8.7mm_P5.00mm_Fastron_07HCP | L201 |
| 1 | 22u | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C203 |
| 1 | 250 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R210 |
| 1 | 27k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R208 |
| 1 | 30.9k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R204 |
| 1 | 68k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R205 |
| 1 | 780k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R209 |
| 1 | 95.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R203 |
| 1 | CR1225 | Battery:Battery_Panasonic_CR1220-VCN_Vertical_CircularHoles | BT701 |
| 1 | Calibrate | Button_Switch_THT:SW_PUSH_6mm | SW401 |
| 1 | Conn_01x02 | Connector_JST:JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical | J301 |
| 1 | FT232RL | Package_SO:SSOP-28_5.3x10.2mm_P0.65mm | U402 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP201 |
| 1 | LED | LED_THT:LED_D5.0mm | D204 |
| 1 | LTC3426 | Package_TO_SOT_SMD:TSOT-23-6_HandSoldering | U201 |
| 1 | MCP602 | Package_DIP:DIP-8_W7.62mm_Socket | U203 |
| 1 | MCP73811T | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U202 |
| 1 | PA1616S | GAINS_FOOTPRINTS:PA1616S | U701 |
| 1 | PMOS | Package_TO_SOT_THT:TO-220-3_Vertical | Q201 |
| 1 | Power Switch | GAINS_FOOTPRINTS:Power Switch | SW201 |
| 1 | Speaker | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | LS401 |
| 1 | Teensy_4.1 | GAINS_FOOTPRINTS:Teensy41 | U401 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J302 |
| 1 | Upload | Button_Switch_THT:SW_PUSH_6mm | SW402 |
More from ritter30/senior-design
1- 2 layers97 × 39 mm

Similar boards
- 2 layers178.2 × 110.9 mm

LegRobotBoardTeensy
01binary/str1ker
A human-scale mech integrated with Robot Operating System
179 parts20 - 2 layers143 × 40.6 mm

- 2 layers101.9 × 101.9 mm

Tejas
Rujul-Rumale/INSPACe-CanSat-Team-Tejas-PCB-Design
Onboard computer PCB for the INSPACe Team Tejas CanSat — Teensy 4.1 + XBee + sensor suite, designed in KiCad. Schematic, layout, Gerbers, 3D renders and libraries.
34 parts1 - 4 layers42.2 × 101.8 mm

Datalogger PCB
uwp-sammckee/DataLogger
PACKET BREAKDOWN: 0-roll\ 1-pitch\ 2-yaw\ 3-alitude\ 4-pressure\ 5-temperature\ 6-accX\ 7-accY\ 8-accZ\ 9-gyroX\ 10-gyroY\ 11-gyroZ\ 12-time\ 13-placeholder\ 14-placeholder\ 15-placeholder
54 parts1 - 6 layers128 × 89.5 mm

- 2 layers76.1 × 70 mm

- 2 layers180 × 110 mm

Main PCB 2.0
Kushal-Sachdeva78/VVS-Ballers-RoboCup
Autonomous RoboCupJunior Soccer (IR League) robots by Team VVS Ballers: 9th place at RoboCup 2026 in Incheon. Teensy 4.1 multi-board electronics, IR/line/ultrasonic sensing, OpenMV vision, 48 V solenoid kicker.
19 parts1MIT - 2 layers80 × 76.2 mm

ADS Real
alegoldstein/Webcam
Custom webcam built around an Atmel MCU for image collection and processing and an ESP32 to host a web server
11 parts
Questions
How big is the GAINS PCB PCB?
It measures 73.7 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the GAINS PCB use?
79 parts, built around the TEENSY 4.1, FT232RL, MCP602-I/P and BNO055. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GAINS PCB KiCad files?
From the ritter30/senior-design repository on GitHub, at the commit this page was made from: the board is PCBs/GAINS_PCB/GAINS_PCB.kicad_pcb and its schematic PCBs/GAINS_PCB/GAINS_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the GAINS PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask ritter30 before reusing the design.