Skip to the content
4 layers35.6 × 25.6 mmRF Module, the printed circuit board in 3D

All the PCBs and CAD files for our Apex weather balloon module

Size
35.6 × 25.6 mm
Copper layers
4
Thickness
1.61 mm
Parts
29
Nets
27
Pads
88
Tracks, vias
91, 125
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 May 2025
Updated
11 Jun 2025

Overview

RF Module is an open-source printed circuit board by Apex-Ottawa-Team, from the Apex-Ottawa-Team/hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 35.6 × 25.6 mm with 29 parts on 27 nets, routed with 91 tracks and 125 vias.

It is built around the SX1262IMLTRT. Its parts include 13 capacitors, 4 inductors, 2 connectors, 1 resistor and 1 IC. It belongs with the radio and wireless boards of this library.

Main components

1

README

README.md

The Ottawa Skybound Logo

Apex Hardware

Overview

This repository contains the hardware design files for Ottawa Skybound's weather ballon for Apex. The repository contains of multiple PCB modules designed in KiCad. The system includes a motherboard, wireless communication module, and various sensor interfaces.

Boards

LoRa Module: Wireless communication module using LoRa technology. Designed by Adam Turaj

Motherboard: Main control board for the Apex system. Designed by Adam Turaj

Sensor Board: A board containing an IMU and temperature reader. Designed by Joshua Gallinger

Strain ADC: Analog-to-digital converter board for strain measurements. Designed by Adam Turaj

Archive/RF Module: Previous design iteration of the LoRa board. Designed by Adam Turaj

Gas Sensor: Collects data on TVOC concentrations in the air. Designed by Aryan Zafer

Ground RF: Board used to communicate and receive data from the weather balloon. Designed by Aryan Zafer

Development Requirements

KiCad 9.0 or newer

License

This project is licensed under the GNU GENERAL PUBLIC LICENSE. The license can be found here.

Parts

29
QtyValueFootprintReferences
30.1uFCapacitor_SMD:C_0402_1005MetricC1, C2, C4
210pFCapacitor_SMD:C_0402_1005MetricC3, C5
227pFCapacitor_SMD:C_0402_1005MetricC11, C12
10.47uFCapacitor_SMD:C_0402_1005MetricC6
11.5pFCapacitor_SMD:C_0402_1005MetricC8
110nHInductor_SMD:L_0402_1005MetricL4
110uFCapacitor_SMD:C_0402_1005MetricC13
115uHInductor_SMD:L_0805_2012MetricL2
117nHInductor_SMD:L_0402_1005MetricL3
1200R@100MHzInductor_SMD:L_0402_1005MetricFB1
1220RResistor_SMD:R_0402_1005MetricR1
13.9pFCapacitor_SMD:C_0402_1005MetricC10
132MHzOscillator:Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mmX1
147nFCapacitor_SMD:C_0402_1005MetricC9
147nHInductor_SMD:L_0402_1005MetricL1
147pFCapacitor_SMD:C_0402_1005MetricC7
1Conn_CoaxialConnector_Coaxial:SMA_Molex_0732511353_VerticalJ1
1Conn_MBConnector_JST:JST_XH_B9B-XH-A_1x09_P2.50mm_VerticalJ2
1LOGOSilkscreen:ApexLogoG***
1LOGOSymbol:LogoG***
1LOGOSilkscreen:TeamLogoG***
1SX1262IMLTRTPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU1

The 26 most common of 29 parts.

More from Apex-Ottawa-Team/hardware

6
  • 2 layers40.5 × 23.3 mmStrain ADC, the printed circuit board in 3D

    Strain ADC

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    92 partsGPL-3.0
  • 2 layers49.8 × 39 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    36 partsGPL-3.0
  • 4 layers36.1 × 37.8 mmGround RF Controller, the printed circuit board in 3D

    Ground RF Controller

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    33 partsGPL-3.0
  • 2 layers22.5 × 14 mmSensors, the printed circuit board in 3D

    Sensors

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    15 partsGPL-3.0
  • 2 layers22.5 × 14 mmGas Sensor, the printed circuit board in 3D

    Gas Sensor

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    14 partsGPL-3.0
  • 2 layers40 × 34.5 mmLoRa Module, the printed circuit board in 3D

    LoRa Module

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    13 partsGPL-3.0

Similar boards

  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0
  • 4 layers68.8 × 90.3 mmHorizon, the printed circuit board in 3D

    Horizon

    Horizon-Avionics/Horizon-H1

    Building a fully open-source flight computer for amateur rocketry!

    173 parts17
  • 4 layers61.8 × 79.6 mmShipwrecked pcb, the printed circuit board in 3D

    Shipwrecked pcb

    mpkendall/shipwrecked-pcb

    Shipwrecked PCB Badges

    153 parts17Unlicense
  • 4 layers23.4 × 25.4 mmLow Power LoRa, the printed circuit board in 3D

    Low Power LoRa

    SorenGilkeyJohnson/LowLoRa

    A solar powered, batteryless LoRa (expandable) sensor node powered from a supercapacitor charged by a small solar cell using an energy harvester.

    70 parts3CERN-OHL-S-2.0
  • 4 layers85 × 55 mmDevice, the printed circuit board in 3D

    Device

    jayis1/hacker-devices

    Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

    29 parts2
  • 4 layers60 × 40 mmMccx11 hardware, the printed circuit board in 3D

    Mccx11 hardware

    OscRos03/mccx11_hardware

    LoRa Based Cat Tracker Hardware

    159 parts2MIT
  • 6 layers30 × 60 mmFlight Computer, the printed circuit board in 3D

    Flight Computer

    Pioneer-Rocketry/Flight-Computer

    Pioneer Rocketry’s latest generation flight computer for high power, STM32-based avionics system designed for experimental high-power rockets.

    116 parts2
  • 4 layers47.5 × 43.5 mmLora v2, the printed circuit board in 3D

    Lora v2

    AYUSH-pro-grammer/lora

    A LoRa board project that I made in order to figure out how radios really work, rather than just reading about them.

    65 parts1

Questions

How big is the RF Module PCB?

It measures 35.6 × 25.6 mm and has 4 copper layers, 1.61 mm thick.

What parts does the RF Module use?

29 parts, built around the SX1262IMLTRT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RF Module KiCad files?

From the Apex-Ottawa-Team/hardware repository on GitHub, at the commit this page was made from: the board is Archive/RF Module/RF Module.kicad_pcb and its schematic Archive/RF Module/RF Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RF Module design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).