Skip to the content
2 layers40.5 × 23.3 mmStrain ADC, the printed circuit board in 3D

All the PCBs and CAD files for our Apex weather balloon module

Size
40.5 × 23.3 mm
Copper layers
2
Thickness
1.6 mm
Parts
92
Nets
53
Pads
226
Tracks, vias
351, 50
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 May 2025
Updated
11 Jun 2025

Overview

Strain ADC is an open-source printed circuit board by Apex-Ottawa-Team, from the Apex-Ottawa-Team/hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40.5 × 23.3 mm with 92 parts on 53 nets, routed with 351 tracks and 50 vias.

It is built around the ADC081C021CIMM. Its parts include 46 resistors, 20 capacitors, 11 connectors and 7 ICs.

Main components

1

README

README.md

The Ottawa Skybound Logo

Apex Hardware

Overview

This repository contains the hardware design files for Ottawa Skybound's weather ballon for Apex. The repository contains of multiple PCB modules designed in KiCad. The system includes a motherboard, wireless communication module, and various sensor interfaces.

Boards

LoRa Module: Wireless communication module using LoRa technology. Designed by Adam Turaj

Motherboard: Main control board for the Apex system. Designed by Adam Turaj

Sensor Board: A board containing an IMU and temperature reader. Designed by Joshua Gallinger

Strain ADC: Analog-to-digital converter board for strain measurements. Designed by Adam Turaj

Archive/RF Module: Previous design iteration of the LoRa board. Designed by Adam Turaj

Gas Sensor: Collects data on TVOC concentrations in the air. Designed by Aryan Zafer

Ground RF: Board used to communicate and receive data from the weather balloon. Designed by Aryan Zafer

Development Requirements

KiCad 9.0 or newer

License

This project is licensed under the GNU GENERAL PUBLIC LICENSE. The license can be found here.

Parts

92
QtyValueFootprintReferences
124k7Resistor_SMD:R_0402_1005MetricR21, R22, R23, R24, R25, R26, R27, R28, R29, R30, R31, R32
10100RResistor_SMD:R_0402_1005MetricR11, R12, R13, R14, R15, R16, R17, R18, R19, R20
1010nFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C6, C7, C8, C9, C10
102RResistor_SMD:R_0603_1608MetricR37, R38, R39, R40, R41, R42, R43, R44, R45, R46
10~Resistor_SMD:R_0805_2012MetricJ1, J2, J3, J4, J5, J6, J7, J8, J9, J10
8350RResistor_SMD:R_0402_1005MetricR1, R2, R4, R5, R6, R7, R9, R10
70.1uFCapacitor_SMD:C_0402_1005MetricC11, C12, C13, C14, C15, C16, C17
5MCP3421A0T-ECHPackage_TO_SOT_SMD:SOT-23-6U1, U2, U3, U4, U5
210uFCapacitor_SMD:C_0402_1005MetricC18, C20
22k2Resistor_SMD:R_0402_1005MetricR33, R34
2348RResistor_SMD:R_0402_1005MetricR3, R8
110kResistor_SMD:R_0402_1005MetricR36
110kResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_VerticalTH1
11uFCapacitor_SMD:C_0402_1005MetricC19
1200R@100MHzInductor_SMD:L_0805_2012MetricFB1
151kResistor_SMD:R_0402_1005MetricR35
1ADC081C021CIMMPackage_SO:MSOP-8_3x3mm_P0.65mmU7
1Conn_01x05Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ11
1LOGOSymbol:LogoG***
1LOGOSilkscreen:ApexLogoG***
1LOGOSilkscreen:TeamLogoG***
1TCA9548APWRPackage_SO:TSSOP-24_4.4x7.8mm_P0.65mmU6

The 89 most common of 92 parts.

More from Apex-Ottawa-Team/hardware

6
  • 2 layers49.8 × 39 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    36 partsGPL-3.0
  • 4 layers36.1 × 37.8 mmGround RF Controller, the printed circuit board in 3D

    Ground RF Controller

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    33 partsGPL-3.0
  • 4 layers35.6 × 25.6 mmRF Module, the printed circuit board in 3D

    RF Module

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    29 partsGPL-3.0
  • 2 layers22.5 × 14 mmSensors, the printed circuit board in 3D

    Sensors

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    15 partsGPL-3.0
  • 2 layers22.5 × 14 mmGas Sensor, the printed circuit board in 3D

    Gas Sensor

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    14 partsGPL-3.0
  • 2 layers40 × 34.5 mmLoRa Module, the printed circuit board in 3D

    LoRa Module

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    13 partsGPL-3.0

Similar boards

  • 2 layersEchelon, the printed circuit board in 3D

    Echelon

    systemsculptor/Echelon

    Advanced RISC-V Modular Laptop

    6 parts2
  • 2 layers69 × 30.9 mmData acquisition, the printed circuit board in 3D

    Data acquisition

    IEEE-VIT/Iot-Data-Acquisiton-Board

    The 2-Layer IoT Data Acquisition Board is an ESP32-based PCB designed for precision environmental monitoring. It integrates MQ-6 and BME280 sensors with an ADS1115 16-bit ADC and MCP6002 .

    19 partsMIT
  • 4 layers80 × 49 mmGlasgow, the printed circuit board in 3D

    Glasgow

    GlasgowEmbedded/glasgow

    Scots Army Knife for electronics

    118 parts2.2k0BSD
  • 2 layers73.5 × 41.5 mmPower board, the printed circuit board in 3D

    Power board

    professoralex13/CosplayCore

    This overrides the strapping pin so the memory supply voltage is permenantly set at 3.3V. Until this comand is run and the fuses are burned on the ESP32, it cannot be flashed with any code.

    52 parts
  • 2 layers102.4 × 211.3 mmHaxophone001, the printed circuit board in 3D

    Haxophone001

    cardonabits/haxo-hw

    Haxophone, an electronic musical instrument that resembles a saxophone

    92 parts674
  • 2 layers40.6 × 110 mmEuropi surface mount, the printed circuit board in 3D

    Europi surface mount

    Allen-Synthesis/EuroPi

    EuroPi: A reprogrammable Eurorack module based on the Raspberry Pi Pico

    92 parts584CC0-1.0
  • 2 layers142.5 × 101 mmHillside46, the printed circuit board in 3D

    Hillside46

    mmccoyd/hillside

    Family of split ergonomic keyboards with three rows of six or five keys and a generous thumb arc

    92 parts448MIT

Questions

How big is the Strain ADC PCB?

It measures 40.5 × 23.3 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Strain ADC use?

92 parts, built around the ADC081C021CIMM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Strain ADC KiCad files?

From the Apex-Ottawa-Team/hardware repository on GitHub, at the commit this page was made from: the board is Strain ADC/Strain_ADC.kicad_pcb and its schematic Archive/RF Module/RF Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Strain ADC design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).