2 layers
2 layers
Echelon
systemsculptor/Echelon2Advanced RISC-V Modular Laptop
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 483
- Pads
- 753
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 3 Aug 2023
- Updated
- 26 Apr 2024
Overview
Echelon is an open-source printed circuit board by systemsculptor, from the systemsculptor/Echelon repository on GitHub. It is a 2-layer board with 6 parts on 483 nets.
It is built around the ATXMEGA384D3-AU, ESP8266EX and ADC081C021CIMM, with the FE310-G002 among its other parts. It belongs with the computers and single-board computers boards and the ESP8266, AVR (ATmega, ATtiny) and RISC-V boards of this library.
Main components
4
ATXMEGA384D3-AU
TQFP-64-40℃~+85℃ 1.6V~3.6V 12bit 32KB 32MHz 384KB 4KB 50 8/16 Bit AVR Built-in FLASH TQFP-64(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ESP8266EX
QFN-32-EP(5x5)-40℃~+125℃ -91dBm 120mA 2.4GHz 2.4GHz~2.4835GHz 2.5V~3.6V 21.5dBm 50mA 72.2Mbps SPI、UART、I2C、I2S WiFi transceiver QFN-32-EP(5x5) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
ADC081C021CIMM
VSSOP-8-0.65mm-40℃~+105℃ 0.2LSB 1 100nA 188.9kHz 2.7V~5.5V 49.8dB 8 Built-in I2C No SAR VSSOP-8-0.65mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADCs)
FE310-G002
QFN48-6X6-0.4QFN48-6X6-0.4 New Arrivals ROHSSiFiveUncategorised
README
PCB/README.mdrisc-v-research
Features
Modularity, Ports, Periperials will be able to be swapped out.
Cost efficient solution for students or professionals looking for a laptop
Reparibility is very straightforward and simple.
Upgradability is supported for these devices for lifetime.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | ATxmega384D3-A | Package_QFP:TQFP-64_14x14mm_P0.8mm | U2, U5 |
| 1 | ADC081C021CIMM | Package_SO:MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | ESP8266EX | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U4 |
| 1 | FE310-G002 | Package_DFN_QFN:QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm_ThermalVias | U5 |
| 1 | FU540-C000 | Package_BGA:BGA-484_23.0x23.0mm_Layout22x22_P1.0mm | U6 |
More from systemsculptor/Echelon
1Similar boards
- 4 layers166.6 × 94 mm
Panel
nrdsp/rvPhone
The goal of the this project is to develop a privacy enhanced, simple and fully featured mobile phone.
319 parts - 2 layers40.5 × 23.3 mm
Strain ADC
Apex-Ottawa-Team/hardware
All the PCBs and CAD files for our Apex weather balloon module
92 partsGPL-3.0 - 2 layers69 × 30.9 mm
Data acquisition
IEEE-VIT/Iot-Data-Acquisiton-Board
The 2-Layer IoT Data Acquisition Board is an ESP32-based PCB designed for precision environmental monitoring. It integrates MQ-6 and BME280 sensors with an ADS1115 16-bit ADC and MCP6002 .
19 partsMIT - 4 layers80 × 49 mm
- 4 layers80 × 49 mm
- 2 layers73.5 × 41.5 mm
Power board
professoralex13/CosplayCore
This overrides the strapping pin so the memory supply voltage is permenantly set at 3.3V. Until this comand is run and the fuses are burned on the ESP32, it cannot be flashed with any code.
52 parts - 4 layers100 × 54 mm
32Bit shift register
MaltWhiskey/Mega-Cube
16x16x16 PL9823 Cube with Teensy 4.0 and FlexIO driver
64 parts766 - 2 layers32 × 24 mm
Questions
What parts does the Echelon use?
6 parts, built around the ATXMEGA384D3-AU, ESP8266EX, ADC081C021CIMM and FE310-G002. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Echelon KiCad files?
From the systemsculptor/Echelon repository on GitHub, at the commit this page was made from: the board is PCB/echelon.kicad_pcb and its schematic Hardware/yrdy/yrdy-backups/yrdy-2024-02-09_121220/echelon/echelon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Echelon design in my own project?
Its repository states no licence, so its author keeps all rights: ask systemsculptor before reusing the design.