Skip to the content
2 layers40 × 34.5 mmLoRa Module, the printed circuit board in 3D

All the PCBs and CAD files for our Apex weather balloon module

Size
40 × 34.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
7
Pads
29
Tracks, vias
31, 1
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
31 May 2025
Updated
11 Jun 2025

Overview

LoRa Module is an open-source printed circuit board by Apex-Ottawa-Team, from the Apex-Ottawa-Team/hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 34.5 mm with 13 parts on 7 nets, routed with 31 tracks and 1 via.

Its parts include 2 capacitors, 2 resistors, 1 IC and 1 connector. It belongs with the radio and wireless boards of this library.

README

README.md

The Ottawa Skybound Logo

Apex Hardware

Overview

This repository contains the hardware design files for Ottawa Skybound's weather ballon for Apex. The repository contains of multiple PCB modules designed in KiCad. The system includes a motherboard, wireless communication module, and various sensor interfaces.

Boards

LoRa Module: Wireless communication module using LoRa technology. Designed by Adam Turaj

Motherboard: Main control board for the Apex system. Designed by Adam Turaj

Sensor Board: A board containing an IMU and temperature reader. Designed by Joshua Gallinger

Strain ADC: Analog-to-digital converter board for strain measurements. Designed by Adam Turaj

Archive/RF Module: Previous design iteration of the LoRa board. Designed by Adam Turaj

Gas Sensor: Collects data on TVOC concentrations in the air. Designed by Aryan Zafer

Ground RF: Board used to communicate and receive data from the weather balloon. Designed by Aryan Zafer

Development Requirements

KiCad 9.0 or newer

License

This project is licensed under the GNU GENERAL PUBLIC LICENSE. The license can be found here.

Parts

13
QtyValueFootprintReferences
210kResistor_SMD:R_0402_1005MetricR1, R2
2Jumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmM0, M1
10.1uFCapacitor_SMD:C_0402_1005MetricC1
14.7uFCapacitor_SMD:C_0402_1005MetricC2
1Conn_MBConnector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ1
1LOGOSilkscreen:TeamLogoG***
1LOGOSilkscreen:ApexLogoG***
1~RF_EByte:EBYTE-E220-900T22DU1

The 10 most common of 13 parts.

More from Apex-Ottawa-Team/hardware

6
  • 2 layers40.5 × 23.3 mmStrain ADC, the printed circuit board in 3D

    Strain ADC

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    92 partsGPL-3.0
  • 2 layers49.8 × 39 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    36 partsGPL-3.0
  • 4 layers36.1 × 37.8 mmGround RF Controller, the printed circuit board in 3D

    Ground RF Controller

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    33 partsGPL-3.0
  • 4 layers35.6 × 25.6 mmRF Module, the printed circuit board in 3D

    RF Module

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    29 partsGPL-3.0
  • 2 layers22.5 × 14 mmSensors, the printed circuit board in 3D

    Sensors

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    15 partsGPL-3.0
  • 2 layers22.5 × 14 mmGas Sensor, the printed circuit board in 3D

    Gas Sensor

    Apex-Ottawa-Team/hardware

    All the PCBs and CAD files for our Apex weather balloon module

    14 partsGPL-3.0

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the LoRa Module PCB?

It measures 40 × 34.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LoRa Module use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LoRa Module KiCad files?

From the Apex-Ottawa-Team/hardware repository on GitHub, at the commit this page was made from: the board is LoRa Module/LoRa Module.kicad_pcb and its schematic Archive/RF Module/RF Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LoRa Module design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).