
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
VLSI SolutionExtended
-40℃~+85℃ 1.65V~2V、2.5V~3.6V 8kHz~48kHz Encoder/decoder I2S、SPI、UART LQFP-48(7x7) Audio Interface ICs ROHS
The VS1053B-L is an audio Interface IC made by VLSI Solution in a LQFP-48 package with 48 pins. -40℃~+85℃ 1.65V~2V、2.5V~3.6V 8kHz~48kHz Encoder/decoder I2S、SPI、UART LQFP-48(7x7) Audio Interface ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:VS1053B, from EasyEDA) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 165 are in stock at JLCPCB (part C9922). 19 open-source boards in 13 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Analog Positive Supply AVDD | min -0.3 · max 3.6 V | 10 | |
| Digital Positive Supply CVDD | min -0.3 · max 2 V | 10 | |
| I/O Positive Supply IOVDD | min -0.3 · max 3.6 V | 10 | |
| Current at Any Digital Output | ±50 mA limit | max 50 mA | 10 |
| Voltage at Any Digital Input | Maximum IOVDD+0.3 V; must not exceed 3.6 V | min -0.3 V | 10 |
| Operating Temperature | min -40 · max 85 ◦C | 10 | |
| Storage Temperature | min -65 · max 150 ◦C | 10 | |
| Ambient Operating Temperature | min -40 · max 85 ◦C | 10 | |
| Analog and Digital Ground AGND DGND | Must be connected together as close the device as possible for latch-up immunity | typ 0 V | 10 |
| Positive Analog AVDD | min 2.5 · typ 2.8 · max 3.6 V | 10 | |
| Positive Digital CVDD | min 1.65 · typ 1.8 · max 2 V | 10 | |
| I/O Voltage IOVDD | Minimum CVDD-0.6V | typ 2.8 · max 3.6 V | 10 |
| Input Clock Frequency XTALI | Maximum samplerate XTALI/256; XTALI at least 12.288 MHz for correct 48 kHz playback | min 12 · typ 12.288 · max 13 MHz | 10 |
| Internal Clock Frequency CLKI | min 12 · typ 36.864 · max 55.3 MHz | 10 | |
| Internal Clock Multiplier | Reset value 1.0× | min 1 · typ 3 · max 4.5 × | 10 |
| Master Clock Duty Cycle | min 40 · typ 50 · max 60 % | 10 | |
| DAC Resolution | typ 18 bits | 11 | |
| Total Harmonic Distortion THD | typ 0.03 · max 0.1 % | 11 | |
| Dynamic Range (DAC unmuted, A-weighted) IDR | DAC unmuted, A-weighted | typ 100 dB | 11 |
| S/N Ratio (full scale signal) SNR | Full scale signal | typ 94 dB | 11 |
| Interchannel Isolation (Cross Talk) | min 50 · typ 75 dB | 11 | |
| Interchannel Isolation (Cross Talk), with GBUF | With GBUF | typ 40 dB | 11 |
| Interchannel Gain Mismatch | min -0.5 · max 0.5 dB | 11 | |
| Frequency Response | min -0.1 · max 0.1 dB | 11 | |
| Deviation from Linear Phase | max 5 ◦ | 11 | |
| Analog Output Load Capacitance | max 100 pF | 11 | |
| Microphone input amplifier gain MICG | typ 26 dB | 11 | |
| Microphone Total Harmonic Distortion MTHD | typ 0.02 · max 0.1 % | 11 | |
| Microphone S/N Ratio MSNR | min 50 · typ 62 dB | 11 | |
| Line input Total Harmonic Distortion LTHD | typ 0.06 · max 0.1 % | 11 | |
| Line input S/N Ratio LSNR | typ 92 dB | 11 | |
| Line and Microphone input impedances | typ 100 kΩ | 11 | |
| Power Supply Consumption AVDD, Reset | Reset | typ 0.6 · max 5 uA | 11 |
| Power Supply Consumption CVDD = 1.8V, Reset | CVDD = 1.8V, Reset | typ 4 · max 50 uA | 11 |
| Power Supply Consumption AVDD, sine test, 30Ω + GBUF | Sine test, 30Ω + GBUF, full volume, internal clock multiplier 3.0× | typ 36.9 mA | 11 |
| Power Supply Consumption CVDD = 1.8V, sine test | CVDD = 1.8V, sine test, full volume, internal clock multiplier 3.0× | typ 6 mA | 11 |
| Power Supply Consumption AVDD, no load | MPEG 1.0 Layer-3 128 kbps sample, no load, full volume, internal clock multiplier 3.0× | typ 7 mA | 11 |
| Power Supply Consumption AVDD, output load 30Ω | MPEG 1.0 Layer-3 128 kbps sample, output load 30Ω, full volume, internal clock multiplier 3.0× | typ 11 mA | 11 |
| Power Supply Consumption AVDD, 30Ω + GBUF | MPEG 1.0 Layer-3 128 kbps sample, 30Ω + GBUF, full volume, internal clock multiplier 3.0× | typ 16 mA | 11 |
| Power Supply Consumption CVDD = 1.8V | MPEG 1.0 Layer-3 128 kbps sample, CVDD = 1.8V, full volume, internal clock multiplier 3.0× | typ 10 mA | 11 |
| Low-Level Input Voltage | Maximum 0.3×IOVDD | min -0.2 V | 12 |
| Input Leakage Current | min -1 · max 1 uA | 12 | |
| Rise time of all output pins, load = 50 pF | Load = 50 pF | max 50 ns | 12 |
| XRESET active time | min 2 XTALI | 12 | |
| Power on reset, rise time to CVDD | min 10 V/s | 12 |

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

SL-RU/sdmplayer
This is sources of my DIY music player based on STM32 MCU and VS1053 codec




ivop/vs1053-waveblaster
New WaveBlaster Daughterboard based on the VS1053 chip


Yes. The symbol is EasyEDA_Cloud:VS1053B and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-48, with 48 pins. Its footprint is drawn on this page.
VLSI Solution publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C9922, with 165 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the CM108B by Cmedia, the ADAU1701JSTZ-RL by Analog Devices, the PCM9211PTR by Texas Instruments and the HS-100B by Cmedia. Check their datasheets: a part that fits the footprint may still differ in its ratings.
19 boards in 13 repositories on GitHub; the most starred are listed on this page, with their KiCad files.