Skip to the content

HS-100B

CmediaExtended

-15℃~+70℃ 1.8V、3.3V、3.6V、4.5V~5.5V 44.1kHz~48kHz Transceiver、Encoder/decoder USB LQFP-48(7x7) Audio Interface ICs ROHS

Part id
cmedia/HS-100B
Category
Audio Interface ICs
Package
LQFP-48(7x7)
Pins
48
In stock
908 at JLCPCB (C371351)
Used on
4 open-source boards

Overview

The HS-100B is an audio Interface IC made by Cmedia in a LQFP-48(7x7) package with 48 pins. -15℃~+70℃ 1.8V、3.3V、3.6V、4.5V~5.5V 44.1kHz~48kHz Transceiver、Encoder/decoder USB LQFP-48(7x7) Audio Interface ICs ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:HS-100B, from EasyEDA) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 908 are in stock at JLCPCB (part C371351). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1DR2DW3SK4CS5MUTER6PWRSEL7DREG188DREG339NC10MODE11LED012DVSS13NC14NC15NC16NC17MUTEP18NC19LEDR20TEST21NC22NC23NC24NC25AVSS26VBIAS27VREF28MICIN29AVDD30LOL31LOBS32LOR33AVSS34AVDD35DVDD36DVSS37NC38NC39AREG3640MSEL41VOLUP42PDSW43USBDP44USBDM45NC46NC47VOLDN48NC
EasyEDA_Cloud:HS-100BFrom EasyEDA

Footprint

Package_QFP:LQFP-48_7x7mm_P0.5mmFrom KiCad's library

From the datasheet

10
Supply, least
4.5 V · Analog Supply Voltage, recommended operating, min · p. 15
Supply, most
5.5 V · Analog Supply Voltage, recommended operating, max · p. 15
Supply, least
4.5 V · Digital Supply Voltage, recommended operating, min · p. 15
Supply, most
5.5 V · Digital Supply Voltage, recommended operating, max · p. 15
Supply, absolute maximum
6 V · Digital Supply Voltage, absolute maximum · p. 15
Supply, absolute maximum
6 V · Analog Supply Voltage, absolute maximum · p. 15
Works from
-15 °C · Operating ambient temperature, min · p. 15
Works up to
70 °C · Operating ambient temperature, max · p. 15
Takes working
37.25 mA · Total power consumption, typical · p. 15
Takes asleep
1.58 mA · Suspend mode power consumption, typical · p. 15

Open-source boards using it

4
  • 4 layers51.2 × 51.2 mmThe extender, the printed circuit board in 3D

    The extender

    H3wastooshort/the_extender

    it extends your phones storage, battery life, and audio interfaces

    123 parts2GPL-3.0
  • 4 layers53.3 × 85.1 mmHUB75-FPGA Card, the printed circuit board in 3D

    HUB75-FPGA Card

    will-hut/Prototypical

    A USB FPGA-based Hub75 LED matrix driver

    132 parts2
  • 2 layers79 × 50 mmK0swe mountaineer mountaineer, the printed circuit board in 3D

    K0swe mountaineer mountaineer

    punkfab/pcb-corpus

    235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

    71 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the HS-100B?

Yes. The symbol is EasyEDA_Cloud:HS-100B and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HS-100B?

LQFP-48(7x7), with 48 pins. Its footprint is drawn on this page.

Where is the HS-100B datasheet?

Cmedia publishes it: the Datasheet link on this page opens it.

Where can I order the HS-100B?

JLCPCB lists it as part C371351, with 908 in stock; the sellers' links on this page open their listings.

What can replace the HS-100B?

Parts like it in the library: the CM108B by Cmedia, the ADAU1701JSTZ-RL by Analog Devices, the PCM9211PTR by Texas Instruments and the VS1000D-L by VLSI Solution. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HS-100B?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.