
Digirig mobile
softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio
CmediaExtended
-20℃~+70℃ 4.5V~5.5V 44.1kHz~48kHz Encoder/decoder I2S、USB LQFP-48(7x7) Audio Interface ICs ROHS
The CM108B is an audio Interface IC made by Cmedia in a LQFP-48(7x7) package with 48 pins. -20℃~+70℃ 4.5V~5.5V 44.1kHz~48kHz Encoder/decoder I2S、USB LQFP-48(7x7) Audio Interface ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Cloud:CM108B, from EasyEDA) and its footprint (Package_QFP:LQFP-48_7x7mm_P0.5mm, from KiCad's library), ready for a KiCad board. 1,812 are in stock at JLCPCB (part C371347). 10 open-source boards in 9 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Min. digital supply voltage Dvmin | min -0.3 V | 20 | |
| Max. digital supply voltage Dvmax | max 6 V | 20 | |
| Min. analog supply voltage Avmin | min -0.3 V | 20 | |
| Max. analog supply voltage Avmax | max 6 V | 20 | |
| Voltage on any digital input or output pin Dvinout | min -0.3 · max 5.5 V | 20 | |
| Voltage on any analog input or output pin Avinout | min -0.3 · max 3.96 V | 20 | |
| Storage temperature range TBstgB | min -40 · max 125 °C | 20 | |
| ESD human body mode ESD (HBM) | min -4000 · max 4000 V | 20 | |
| ESD machine mode ESD (MM) | min -200 · max 200 V | 20 | |
| JEDEC standard no.78, Mar. 1997 Latch Up | max 200 mA | 20 | |
| Analog supply voltage | min 4.5 · typ 5 · max 5.5 V | 20 | |
| Digital supply voltage | min 4.5 · typ 5 · max 5.5 V | 20 | |
| Total power consumption | typ 37.25 mA | 20 | |
| Suspend-mode power consumption | typ 1.58 uA | 20 | |
| Operating ambient temperature | min -20 · max 70 °C | 20 | |
| Resolution | DAC (10K Ohm Loading) | typ 16 Bits | 20 |
| THD + N (-3dBr) @1KHz | DAC (10K Ohm Loading) | typ -72 dB | 20 |
| SNR | DAC (10K Ohm Loading) | typ 93 dB | 20 |
| Silent SNR | DAC (10K Ohm Loading) | typ 98 dB | 20 |
| Dynamic range | DAC (10K Ohm Loading) | typ 92 dB | 20 |
| Frequency response 48KHz | DAC (10K Ohm Loading) | min 20 Hz | 20 |
| Frequency response 44.1KHz | DAC (10K Ohm Loading) | min 20 Hz | 20 |
| Full Scale Output voltage (rms) | DAC (10K Ohm Loading) | typ 0.995 Vrms | 20 |
| Resolution | DAC (32 Ohm loading) | typ 16 Bits | 20 |
| THD + N (-3dBr) @1KHz | DAC (32 Ohm loading) | typ -70 dB | 20 |
| SNR | DAC (32 Ohm loading) | typ 93 dB | 20 |
| Silent SNR | DAC (32 Ohm loading) | typ 98 dB | 20 |
| Dynamic range | DAC (32 Ohm loading) | typ 92 dB | 20 |
| Frequency response 48KHz | DAC (32 Ohm loading) | min 20 Hz | 20 |
| Frequency response 44.1KHz | DAC (32 Ohm loading) | min 20 | 20 |
| Full Scale Output voltage (rms) | DAC (32 Ohm loading) | typ 0.442 Vrms | 20 |
| Volume Control Initial Value | Output Volume Control | typ -10 dB | 20 |

softcomplex/Digirig-Mobile
Integrated digital modes interface for amateur radio




AndreaGiulianini/lira
57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.



pranavb104/Electret-Amp-USB
A simple transistor based amplifier for electret condenser type mics coupled with CM108b USB audio interface
Yes. The symbol is EasyEDA_Cloud:CM108B and the footprint Package_QFP:LQFP-48_7x7mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
LQFP-48(7x7), with 48 pins. Its footprint is drawn on this page.
Cmedia publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C371347, with 1,812 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the ADAU1701JSTZ-RL by Analog Devices, the PCM9211PTR by Texas Instruments, the HS-100B by Cmedia and the VS1000D-L by VLSI Solution. Check their datasheets: a part that fits the footprint may still differ in its ratings.
10 boards in 9 repositories on GitHub; the most starred are listed on this page, with their KiCad files.