

ESP8266-WebRadio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
- Size
- 52.5 × 36.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 33
- Pads
- 180
- Tracks, vias
- 445, 40
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 15 Jun 2016
- Updated
- 22 Oct 2022
Overview
ESP8266-WebRadio is an open-source printed circuit board by karawin, from the karawin/Ka-Radio repository on GitHub. It is a 2-layer board of 52.5 × 36.6 mm with 52 parts on 33 nets, routed with 445 tracks and 40 vias.
It is built around the NE5532, VS1053B-L and 23LCV1024-I/P, with the LM1117-1.8 and LM1117-3.3 among its other parts. Its parts include 23 capacitors, 13 resistors, 6 ICs, 3 switches and 2 connectors. It belongs with the radio and wireless boards and the ESP8266 boards of this library.
Main components
5NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational AmplifierVS1053B-L
LQFP-48-40℃~+85℃ 1.65V~2V、2.5V~3.6V 8kHz~48kHz Encoder/decoder I2S、SPI、UART LQFP-48(7x7) Audio Interface ICs ROHSVLSI SolutionAudio Interface ICs23LCV1024-I/P
DIP-8-40℃~+85℃ 1Mbit 2.5V~5.5V 4uA SPI PDIP-8 SRAM ROHSMicrochip TechnologySRAMLM1117-1.8
SOT-2231 1.3V@(1000mA) 1.8V 15V 1A 2mA Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorised
README
README.md** ESP8266 & VS1053 Wifi WebRadio **
Ka-Radio, a WiFi shoutcast player based on ESP8266 and VS1053b chips
See also the esp32 version at https://github.com/karawin/Ka-Radio32
Basic informations
New
A new android application is born
- KaRadio Remote Control by Vassilis Serasidis on google Play.
It is an easy and fast WiFi remote control for your KaRadio or KaRadio32 hardware.
With this android app you can select the WebRadio station you want to play, set the volume and get the station information such as Station name, Genre, Bit rate, Meta data and more.
Found it at
https://play.google.com/store/apps/details?id=com.serasidis.karadio.rc
Thanks Vassilis.
Release 1.9 R8 - Built on 2021/01/01
Add On: add a lcd, a remote control, and other goodies: see https://github.com/karawin/Karadio-addons
Attention:
The optional led is now on GPIO2. The blue led on the ESP8266 is blinking at the same rate.
GPIO16 is now the Chip select for the external ram if any.
The external ram is detected at boot time if present.
To load this release, please flash
boot_v1.6.bin at 0x0000,
user1.4096.new.4.bin at 0x1000 ,
user2.4096.new.4.bin at 0X81000,
esp_init_data_default.bin at 0x3FC000
and blank.bin at 0x3fe000
After that, all next updates are done with the On The Air (OTA) feature.
See also https://hackaday.io/project/11570-wifi-webradio-with-esp8266-and-vs1053
Loading the esp8266
The binaries are on ESP8266-Firmware/bin/upgrade/
First use
- If the access point of your router is not known, the webradio inits itself as an AP. Connect the wifi of your computer to the ssid "WifiWebRadio",
- Browse to 192.168.4.1 to display the page, got to "setting" "Wifi" and configure your ssid ap, the password if any, the wanted IP or use dhcp if you know how to retrieve the dhcp given ip (terminal or scan of the network).
- In the gateway field, enter the ip address of your router.
- Validate. The equipment restart to the new configuration. Connect your wifi to your AP and browse to the ip given in configuration.
- Congratulation, you can edit your own station list. Dont forget to save your stations list in case of problem or for new equipments.
- if the AP is already know by the esp8266, the default ip is given by dhcp.
- a sample of stations list is on https://github.com/karawin/Ka-Radio/blob/master/ESP8266-Firmware/WebStations.txt . Can be uploaded via the web page.
- Karadio can be controlled by the web interface or by the uart interface or by telnet. List of commands: type help
- See the list of command at http://karadio.karawin.fr/Interface.txt
Generate Ka-Radio
see the http://karadio.karawin.fr/readme.txt file.
History:
- Based on https://github.com/PiotrSperka/ESP8266-WebRadio
- New development based on the new https://github.com/espressif/ESP8266_RTOS_SDK
- Compiled with esp-open-sdk
- Compatible with mobile
- Stable
- tools to save and restore the stations database
- prototype made with:
-- http://fr.aliexpress.com/item/MB102-Breadboard-Power-Supply-Module-3-3V-5V-For-Solderless-Breadboard/2027279953.html (0.74 euros)
-- http://www.ebay.fr/itm/121775761053?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (3,09 euros)
-- http://www.ebay.fr/itm/401046111343?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (6 euros)
-- http://www.ebay.fr/itm/131683794035?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT (1.05 euros)
-- http://fr.aliexpress.com/item/USB-to-TTL-converter-UART-module-CH340G-CH340-3-3V-5V-switch/32392228218.html?detailNewVersion=2 (0.59 euro)
-- some wires ... - Wiring:
From ESP8266_ESP12( 3.3 v) to VS1053 (5 v)
REST
ADC if control panel is not used, this input must be grounded.
CH_PD to 3.3v
GPIO16 (a 1Hz output)
GPIO14 to VS1053 SCK
GPIO12 to VS1053 MISO
GPIO13 to VS1053 MOSI
TXD to CH340G UART rx
RXD from CH340G UART tx
GPIO05 to VS1053 XDCS
GPIO04 to VS1053 DREQ
GPIO00 to VS1053 XRST
GPIO02
GPIO15 to VS1053 XCS
Optional external ram (23LCV1024) support (1:CS/=GPIO16 2:MISO=GPIO12 3:NC 4:GND 5:MOSI=GPIO13 6:SCK=GPIO14 7:GND 8:3.3v)
If your chip has a /Vhold in place of /VBAT, the pin 7 must be wired to VCC (pin8)
Attention:
The optional led is now on GPIO2. The blue led on the ESP8266 is blinking at the same rate.
GPIO16 is now the Chip select for the external ram if any.
The external ram is detected at boot time if present.
Used hardware
WiFi : ESP8266 (ESP-12 with 32Mbits flash)
Additional MCU (as a bridge UART<=>UI): AVR
Audio decoder: VS1053
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | SM0805 | C1, C2, C3, C4, C5, C10, C15, C16, C18, C19, C21, C22, C23 |
| 5 | 100k | SM0805 | R3, R4, R5, R6, R7 |
| 4 | 10k | SM0805 | R1, R11, R12, R13 |
| 3 | 1u | SM0805 | C11, C12, C13 |
| 3 | P*** | 1pin | , 1PIN, 1PIN |
| 2 | 100u | SMD_elektrolit40 | C6, C7 |
| 2 | 10n | SM0805 | C17, C20 |
| 2 | 20 | SM0805 | R9, R10 |
| 2 | 33p | SM0805 | C8, C9 |
| 1 | 10 | SM0805 | R8 |
| 1 | 12.288MHz | HC-18UV | X1 |
| 1 | 1M | SM0805 | R2 |
| 1 | 23LCV1024 | DIP-8__300_ELL | U3 |
| 1 | 47n | SM0805 | C14 |
| 1 | AUDIO | SIL-3 | K1 |
| 1 | EARPHONES | SIL-3 | K3 |
| 1 | ESP8266_ESP-12 | ESP-12 | U4 |
| 1 | LM1117-1.8 | SOT223 | U2 |
| 1 | LM1117-3.3 | SOT223 | U1 |
| 1 | NE5532 | SO8N | U5 |
| 1 | POWER | SIL-3 | K2 |
| 1 | PROG | SIL-2 | P2 |
| 1 | REF | Logo | VAL |
| 1 | UART | SIL-4 | P1 |
| 1 | VS1053 | LQFP48 | U6 |
Similar boards
- 2 layers48.3 × 41.3 mm

- 2 layers98 × 53.3 mm

Jnedbal microflic junction shield 1 1 microflic junction shield
oomlout/oomlout_oomp_project_bot_v_2
83 parts - 2 layers76.2 × 50.8 mm

- 4 layers72 × 46.5 mm

- 2 layers93.3 × 97.2 mm

- 2 layers91.4 × 91.4 mm

- 2 layers105 × 38.5 mm

- 2 layers90 × 60 mm

Questions
How big is the ESP8266-WebRadio PCB?
It measures 52.5 × 36.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP8266-WebRadio use?
52 parts, built around the NE5532, VS1053B-L, 23LCV1024-I/P and LM1117-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP8266-WebRadio KiCad files?
From the karawin/Ka-Radio repository on GitHub, at the commit this page was made from: the board is Hardware/KiCAD/Main/ESP8266-WebRadio.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP8266-WebRadio design in my own project?
Its repository states no licence, so its author keeps all rights: ask karawin before reusing the design.