
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

Evaluation board for the ASSoC IC
Assoc board is an open-source printed circuit board by leoheck, from the leoheck/assoc-board repository on GitHub. It is a 4-layer board of 72 × 46.5 mm with 48 parts on 56 nets, routed with 430 tracks and 42 vias.
It is built around the LM1117-1.8 and LM1117-3.3. Its parts include 19 capacitors, 7 connectors, 6 resistors, 3 ICs and 2 diodes.
Small and simple evaluation board for the ASSoC IC. ASSoC IC private project can be accessed here.
The IC is accessible through a USB-Serial dongle connected to the computer. The default symbol rate for 25 MHz clock is 11520 Bd (baud rate).
This project uses Kicad 7
The library in this project is a git submodule. Update/clone the library with the following command:
git submodule update --init --recursiveThe ASSoC IC has some issues related to the interconnection of the power rails and the pads. At this moment it is not known if it works properly. This board will be used to investigate these issues and maybe bring it to life.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C19 |
| 4 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14, C15, C16 |
| 4 | MountingHole | GAPH-Extra:MountingHole_2.5mm | H1, H2, H3, H4 |
| 2 | 18p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C17, C18 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 2 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
| 1 | 1V8_On | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | 25 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 3V3_On | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | ASSoC | GAPH-Chips:PLCC-68_THT-Socket | U1 |
| 1 | DL | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J6 |
| 1 | H1 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | H2 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J3 |
| 1 | H3 | Connector_PinSocket_2.54mm:PinSocket_1x12_P2.54mm_Vertical | J1 |
| 1 | H4 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J7 |
| 1 | LM1117-1.8 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | LM1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U3 |
| 1 | PWR | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J5 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | T.SE | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP2 |
| 1 | T.TM | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm | JP3 |
| 1 | USB-UART | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J2 |

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix







It measures 72 × 46.5 mm and has 4 copper layers, 1.6 mm thick.
48 parts, built around the LM1117-1.8 and LM1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the leoheck/assoc-board repository on GitHub, at the commit this page was made from: the board is board.kicad_pcb and its schematic board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask leoheck before reusing the design.