
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix

Tas2562 dev pcb is an open-source printed circuit board by manoj153, from the manoj153/tas2562-testPCB repository on GitHub. It is a 4-layer board of 29.2 × 36.8 mm with 26 parts on 25 nets, routed with 211 tracks and 63 vias.
It is built around the LM1117-1.8. Its parts include 8 capacitors, 4 connectors, 2 ICs and 2 inductors.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C8 |
| 3 | Conn_01x10_Female | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J1, J4 |
| 2 | 1nF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | DNP | Resistor_SMD:R_0805_2012Metric | 10K1, 10K2 |
| 2 | INDUCTOR | Inductor_SMD:L_0805_2012Metric | L1, L2 |
| 2 | LOGO | logos:rodaawana | G***, G*** |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | 100nF1 |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C5 |
| 1 | C | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | GPIO | TestPoint:TestPoint_Pad_D1.5mm | TP3 |
| 1 | INDUCTOR | Inductor_SMD:1212_wurth | 1uH1 |
| 1 | IRQ | TestPoint:TestPoint_Pad_D1.5mm | TP2 |
| 1 | LM1117-1.8 | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | SDOUT | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | Speaker | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | LS1 |
| 1 | TAS2562 | tas2562_dev_pcb:bga36tas | U2 |

karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix







SRiegle2020/ECE49022_SrDsgn_f22_Team44
ECE49022, Team44, f2022. Biometric "Smart" Watch
It measures 29.2 × 36.8 mm and has 4 copper layers, 1.6 mm thick.
26 parts, built around the LM1117-1.8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the manoj153/tas2562-testPCB repository on GitHub, at the commit this page was made from: the board is tas2562_dev_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask manoj153 before reusing the design.