Skip to the content
123456

TLV61070ADBV

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 2.2V~5.5V 2.5A 3uA 500mV~5.5V 550kHz、1MHz Adjustable Boost Boost Built-in Yes SOT-23-6 DC-DC Converters ROHS

Part id
ti/TLV61070ADBV
Category
DC DC Converters
Package
SOT-23-6
Pins
6
In stock
17,967 at JLCPCB (C6881375)
Used on
30 open-source boards

Overview

The TLV61070ADBV is a DC DC Converter made by Texas Instruments in a SOT-23-6 package with 6 pins. -40℃~+125℃@(TJ) 1 2.2V~5.5V 2.5A 3uA 500mV~5.5V 550kHz、1MHz Adjustable Boost Boost Built-in Yes SOT-23-6 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:TLV61070ADBV, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 17,967 are in stock at JLCPCB (part C6881375). 30 open-source boards in 24 repositories on GitHub use it.

Symbol

1SW2GND3EN4VFB5VOUT6VIN
Regulator_Switching:TLV61070ADBVFrom KiCad's library

Footprint

123456
Package_TO_SOT_SMD:SOT-23-6From KiCad's library

From the datasheet

15
Supply, least
500 mV · VIN, recommended operating minimum after startup · p. 4
Supply, most
5.5 V · VIN, recommended operating maximum · p. 4
Supply, absolute maximum
7 V · VIN, absolute maximum · p. 4
Junction, hottest
150 °C · junction temperature absolute maximum · p. 4
Takes working
20.9 µA · sum of VIN and VOUT typical quiescent currents, enabled, no load, no switching · p. 5
Takes asleep
100 nA · typical shutdown current into VIN and SW, 3.6 V, TJ = 25°C · p. 5
Current limit
2.45 A · typical valley switch current limit, VIN = 3.6 V, VOUT = 5.0 V, TJ = 25°C · p. 5
Feedback reference
500 mV · typical FB reference voltage, PWM mode · p. 5
Feedback reference
505 mV · typical FB reference voltage, PFM mode · p. 5
Switches at
1 MHz · typical PWM switching frequency, VIN = 3.6 V, VOUT = 5.0 V · p. 5
Switches at
550 kHz · typical PWM switching frequency, VIN = 1.0 V, VOUT = 5.0 V · p. 5
Junction to air (DBV - 6 PINS)
139.1 K/W · junction-to-ambient thermal resistance · p. 4
Junction to case (DBV - 6 PINS)
34.8 K/W · junction-to-case thermal resistance · p. 4
Junction to board (DBV - 6 PINS)
42.5 K/W · junction-to-board thermal resistance · p. 4
Current limit
2.5 A · typical valley switch current limit over full temperature range · p. 1

What it is and has

11
Topology
Synchronous boost converter · p. 1
Minimum startup input voltage
1.3 V · p. 1
Output voltage setting range
2.2 V to 5.5 V · p. 1
Power MOSFETs
69 mΩ low-side, 89 mΩ high-side · p. 1
Light-load operation
Auto PFM · p. 1
Pass-through mode
When VIN > VOUT · p. 1
Protection
Output short-circuit protection · p. 1
Protection
Output overvoltage, output short circuit, thermal shutdown · p. 1
Package
SOT-23, 6 pins, 2.90 mm × 1.60 mm · p. 1
Minimum start-up input voltage
1.3 V · p. 1
Integrated MOSFETs
69 mΩ low-side, 89 mΩ high-side · p. 1

Around it

5
cap 4.7 µF
between VIN and GND; Nominal effective input capacitance; minimum 1.0 uF. Place close to the IC. · p. 4
cap 10 µF
between VOUT and GND; Nominal effective output capacitance; range 4 to 1000 uF. Place close to the IC. · p. 4
ind 2.2 µH to 4.7 µH
between VIN and SW; Select saturation current above calculated peak inductor current; place close to the IC. · p. 12
res <100 kΩ
between FB and GND; R2 in the external output feedback divider; keep its current at least 100 times the FB leakage current. · p. 12
cap 100 μF
between VIN and GND; Additional tantalum or aluminum electrolytic bulk capacitor when the input supply is more than a few inches from the converter. · p. 16

Specifications

45
ParameterConditionsAs printedPage
Voltage range at terminals(2)VIN, EN, FB, SW, VOUT; over operating free-air temperature rangemin -0.3 · max 7 V4
Voltage range at terminals(2)SW spike at 10nsmin -0.7 · max 8 V4
Voltage range at terminals(2)SW spike at 1nsmin -0.7 · max 9 V4
Operating junction temperature TJmin -40 · max 150 °C4
Storage temperature Tstgmin -65 · max 150 °C4
Electrostatic discharge V(ESD)Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)min -2000 · max 2000 V4
Electrostatic discharge V(ESD)Charged-device model (CDM), per ANSI/ESDA/JEDEC JS-002(2)min -500 · max 500 V4
Input voltage range VINmin 0.5 · max 5.5 V4
Output voltage setting range VOUTmin 2.2 · max 5.5 V4
Effective inductance range LNOM = 1.0 uHmin 0.7 · max 6.1 uH4
Effective input capacitance range CINNOM = 4.7 uFmin 1 uF4
Effective output capacitance range COUTNOM = 10 uFmin 4 · max 1000 uF4
Operating junction temperature TJmin -40 · max 125 °C4
Junction-to-ambient thermal resistance RθJATLV61070A, DBV - 6 PINS, Standardtyp 139.1 °C/W4
Junction-to-case thermal resistance RθJCTLV61070A, DBV - 6 PINS, Standardtyp 34.8 °C/W4
Junction-to-board thermal resistance RθJBTLV61070A, DBV - 6 PINS, Standardtyp 42.5 °C/W4
Junction-to-top characterization parameter ΨJTTLV61070A, DBV - 6 PINS, Standardtyp 1.4 °C/W4
Junction-to-board characterization parameter ΨJBTLV61070A, DBV - 6 PINS, Standardtyp 40.7 °C/W4
Input voltage range VINTJ = –40°C to 125°Cmin 0.5 · max 5.5 V5
Under-voltage lockout threshold VIN_UVLOVIN risingtyp 1 · max 1.3 V5
Under-voltage lockout threshold VIN_UVLOVIN fallingtyp 0.4 · max 0.5 V5
Quiescent current into VIN pin IQIC enabled, No load, No switching VIN = 1.3 V to 5.5 V, VFB = VREF + 0.1 V, TJ up to 85°Ctyp 0.9 · max 3 uA5
Quiescent current into VOUT pin IQIC enabled, No load, No switching VOUT = 2.2 V to 5.5 V, VFB = VREF + 0.1 V, TJ up to 85°Ctyp 20 · max 30 uA5
Shutdown current into VIN and SW pin ISDIC disabled, VIN = VSW = 3.6 V, TJ = 25°Ctyp 0.1 · max 0.2 uA5
Reference voltage at the FB pin VREFPWM modemin 485 · typ 500 · max 515 mV5
Reference voltage at the FB pin VREFPFM modetyp 505 mV5
Output over-voltage protection threshold VOVPVOUT risingmin 5.5 · typ 5.7 · max 6 V5
Over-voltage protection hysteresis VOVP_HYStyp 0.1 V5
Leakage current at FB pin IFB_LKGtyp 4 · max 50 nA5
Leakage current into VOUT pin IVOUT_LKGIC disabled, VIN = 0 V, VSW = 0 V, VOUT = 5.5 V, TJ = 25°Ctyp 1 · max 3 uA5
Soft startup time tSSFrom active EN to VOUT regulation. VIN = 2.5 V, VOUT = 5.0 V, COUT_EFF = 10uF, IOUT = 0typ 750 us5
High-side MOSFET on resistance RDS(on)VOUT = 5.0 Vtyp 89 mohm5
Low-side MOSFET on resistance RDS(on)VOUT = 5.0 Vtyp 69 mohm5
Switching frequency fSWVIN = 3.6 V, VOUT = 5.0 V, PWM modetyp 1 MHz5
Switching frequency fSWVIN = 1.0 V, VOUT = 5.0 V, PWM modetyp 0.55 MHz5
Minimum on time tON_minmin 40 · typ 96 · max 130 ns5
Minimum off time tOFF_mintyp 80 · max 120 ns5
Valley current limit ILIM_SWVIN = 3.6 V, VOUT = 5.0 V,TJ = 25°Cmin 2 · typ 2.45 A5
Valley current limit ILIM_SWVIN = 3.6 V, VOUT = 5.0 V,TJ = –40°C to 125°Cmin 1.8 · typ 2.45 A5
Pre-charge current ILIM_CHGVIN = 1.3 - 5.5 V, VOUT < 0.4 Vmin 100 · typ 185 mA5
Pre-charge current ILIM_CHGVIN = 2.4 V, VOUT = 2.15 Vmin 200 · typ 385 mA5
EN logic high threshold VEN_HVIN > 1.3 V or VOUT > 2.2 Vmax 1.2 V5
EN logic low threshold VEN_LVIN > 1.3 V or VOUT > 2.2 Vmin 0.35 · typ 0.42 · max 0.45 V5
Thermal shutdown threshold TSDTJ risingtyp 150 °C5
Thermal shutdown hysteresis TSD_HYSTJ falling below TSDtyp 20 °C5

Pins, by the datasheet

6
1 SW
Converter switch pin connected to the internal low-side MOSFET drain and high-side MOSFET source. · p. 3
2 GND
Ground pin of the IC. · p. 3
3 EN
Logic high enables the device; logic low disables it and enters shutdown mode. · p. 3
4 FB
Voltage feedback of adjustable output voltage. · p. 3
5 VOUT
Boost converter output. · p. 3
6 VIN
IC power supply input. · p. 3

Ordering codes, by the datasheet

1
TLV61070ADBVR
SOT-23, DBV, 6 pins · Package quantity 3000; operating temperature -40 to 125°C; device marking 2N5F. · p. 19

Open-source boards using it

30See all 30
  • 6 layers156 × 116.4 mmToomanykeys right, the printed circuit board in 3D

    Toomanykeys right

    jusdisgi/TooManyKeys

    Work in progress, new version of BiggieSplays with lots of bells and whistles

    89 parts3MIT
  • 4 layers70 × 70.5 mmPCB FINAL UPDATED, the printed circuit board in 3D

    PCB FINAL UPDATED

    bash227/ECG-Motor-Control-Power-Management-PCB

    A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.

    111 parts2MIT
  • 2 layers139.5 × 153 mmPannel, the printed circuit board in 3D

    Pannel

    cocobot/cocotter

    370 parts2
  • 6 layers184.3 × 234 mmLightfury panel, the printed circuit board in 3D

    Lightfury panel

    jusdisgi/LightFury

    Light Fury Keyboard: Ergo Split with 54 PG1316S keyswitches, 54 LEDs, LCDs, and Roller Encoders.

    284 parts2MIT
  • 2 layers100 × 85 mmAMP RCv2, the printed circuit board in 3D

    AMP RCv2

    Autonomous-Motorsports-Purdue/AMP_RCv2

    Files relating to version 2 of the remote control PCB for AMP kart

    46 parts1MIT
  • 2 layers200 × 99.1 mmUsbchargerpanel12, the printed circuit board in 3D

    Usbchargerpanel12

    cvanbibber/USB-Charger

    A simple USB charger board for soldering, with USB-C bidirectional port, USB-A, and micro-USB as an introduction to pcb design and usb standards.

    288 parts1GPL-3.0
  • 4 layers95 × 90.6 mmGameConsoleRev1, the printed circuit board in 3D

    GameConsoleRev1

    Rehabilitation-Innovation/REGI-GameBoy

    178 parts1
  • 2 layersOpenoshi lightboard, the printed circuit board in 3D

    Openoshi lightboard

    seventhsu/openoshi

    A fully open-source, DIY concert penlight.

    29 parts1CERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the TLV61070ADBV?

Yes. The symbol is Regulator_Switching:TLV61070ADBV and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the TLV61070ADBV?

SOT-23-6, with 6 pins. Its footprint is drawn on this page.

Where is the TLV61070ADBV datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the TLV61070ADBV?

JLCPCB lists it as part C6881375, with 17,967 in stock; the sellers' links on this page open their listings.

What can replace the TLV61070ADBV?

Parts like it in the library: the TPS54302DDC by Texas Instruments, the MT3608B by XI'AN Aerosemi Tech, the SY8113IADC by 矽力杰silergy and the HFP6291LR-G1 by HXY MOSFET. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the TLV61070ADBV?

30 boards in 24 repositories on GitHub; the most starred are listed on this page, with their KiCad files.