2 layers100 × 99.1 mm
Usbchargerpanel6
cvanbibber/USB-Charger
A simple USB charger board for soldering, with USB-C bidirectional port, USB-A, and micro-USB as an introduction to pcb design and usb standards.
144 parts1GPL-3.0
2 layers200 × 99.1 mm
Usbchargerpanel12
cvanbibber/USB-Charger1A simple USB charger board for soldering, with USB-C bidirectional port, USB-A, and micro-USB as an introduction to pcb design and usb standards.
- Size
- 200 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 288
- Nets
- 240
- Pads
- 960
- Tracks, vias
- 828, 108
- Pours
- 108
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 17 Feb 2025
- Updated
- 17 Feb 2025
Overview
Usbchargerpanel12 is an open-source printed circuit board by cvanbibber, from the cvanbibber/USB-Charger repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 200 × 99.1 mm with 288 parts on 240 nets, routed with 828 tracks and 108 vias.
It is built around the TLV61070ADBV. Its parts include 60 resistors, 36 diodes, 36 connectors, 24 capacitors and 12 ICs.
Main components
1Parts
288| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R2, R4, R4, R4, R4 +20 |
| 36 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP1, JP2, JP2, JP2, JP2 +20 |
| 24 | D_Schottky | Diode_SMD:D_SMA_Handsoldering | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D1, D2, D2, D2, D2 +8 |
| 12 | 220 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3, R3 |
| 12 | 22uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2, C2 |
| 12 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 |
| 12 | 4.7u | microusb:TMPA 1005SV-4R7MN-D | L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1, L1 |
| 12 | 91k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 |
| 12 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1, BT1, BT1, BT1, BT1, BT1, BT1, BT1, BT1, BT1, BT1, BT1 |
| 12 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3, D3 |
| 12 | Logo_Open_Hardware_Small | practice-lib:ieee | LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1, LOGO1 |
| 12 | Polyfuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F1, F1, F1, F1, F1, F1, F1, F1, F1, F1, F1 |
| 12 | TLV61070ADBV | Package_TO_SOT_SMD:SOT-23-6 | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
| 12 | USB_A | Connector_USB:USB_A_Molex_67643_Horizontal | J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3, J3 |
| 12 | USB_B_Micro | microusb:CONN_10118192-0002LF_AMP | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J1 |
| 12 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2, J2 |
The 252 most common of 288 parts.
More from cvanbibber/USB-Charger
2- 2 layers50 × 33 mm
Updated boost USB charger
cvanbibber/USB-Charger
A simple USB charger board for soldering, with USB-C bidirectional port, USB-A, and micro-USB as an introduction to pcb design and usb standards.
24 parts1GPL-3.0
Similar boards
- 6 layers156 × 116.4 mm
Toomanykeys right
jusdisgi/TooManyKeys
Work in progress, new version of BiggieSplays with lots of bells and whistles
89 parts3MIT - 4 layers70 × 70.5 mm
PCB FINAL UPDATED
bash227/ECG-Motor-Control-Power-Management-PCB
A multi-function PCB integrating biomedical signal acquisition (ECG), DC motor control, and advanced power management for wearable applications.
111 parts2MIT - 2 layers139.5 × 153 mm
- 6 layers184.3 × 234 mm
Lightfury panel
jusdisgi/LightFury
Light Fury Keyboard: Ergo Split with 54 PG1316S keyswitches, 54 LEDs, LCDs, and Roller Encoders.
284 parts2MIT - 2 layers100 × 85 mm
AMP RCv2
Autonomous-Motorsports-Purdue/AMP_RCv2
Files relating to version 2 of the remote control PCB for AMP kart
46 parts1MIT - 4 layers95 × 90.6 mm
- 2 layers
Openoshi lightboard
seventhsu/openoshi
A fully open-source, DIY concert penlight.
29 parts1CERN-OHL-S-2.0 - 2 layers100 × 100 mm
Questions
How big is the Usbchargerpanel12 PCB?
It measures 200 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usbchargerpanel12 use?
288 parts, built around the TLV61070ADBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usbchargerpanel12 KiCad files?
From the cvanbibber/USB-Charger repository on GitHub, at the commit this page was made from: the board is usbchargerpanel12.kicad_pcb and its schematic updated_boost_USB_charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usbchargerpanel12 design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).