
P2 Kevinbot Board
meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller
Texas InstrumentsExtended
-40℃~+125℃ 1 1 256 3V~5.5V 3mA 50Mbps Fail-safe Full-Duplex Transceiver ±30kV SOIC-8 RS-485 / RS-422 ICs ROHS
The THVD1451D is a RS 485, RS 422 IC made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 1 256 3V~5.5V 3mA 50Mbps Fail-safe Full-Duplex Transceiver ±30kV SOIC-8 RS-485 / RS-422 ICs ROHS.
PCBKit's library has its KiCad symbol (Interface_UART:THVD1451D, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1544481). 9 open-source boards in 8 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage VCC | Over operating free-air temperature range | min -0.5 · max 7 V | 8 |
| Bus voltage | Range at any bus pin (A, B, Y, or Z) as differential or common-mode with respect to GND | min -18 · max 18 V | 8 |
| Input voltage | Range at any logic pin (D, DE, or RE); D applies to THVD1451 | min -0.3 · max 5.7 V | 8 |
| Receiver output current IO | Over operating free-air temperature range | min -24 · max 24 mA | 8 |
| Storage temperature range | min -65 · max 150 ℃ | 8 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; bus pins and GND; ±30 kV | max 30 kV | 8 |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001; all other pins; ±8 kV | max 8 kV | 8 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC JESD22-C101; all pins; ±1.5 kV | max 1.5 kV | 8 |
| Electrostatic discharge V(ESD) | Machine model (MM), per JEDEC JESD22-A115-A; all pins; ±200 V | max 200 V | 8 |
| Electrostatic discharge V(ESD) | Contact discharge, per IEC 61000-4-2; bus pins and GND; ±18 kV | max 18 kV | 8 |
| Electrostatic discharge V(ESD) | Air-gap discharge, per IEC 61000-4-2; bus pins and GND; ±25 kV | max 25 kV | 8 |
| Electrical fast transient V(EFT) | Per IEC 61000-4-4; bus pins and GND; ±4 kV | max 4 kV | 8 |
| Supply voltage VCC | min 3 · max 5.5 V | 9 | |
| Input voltage at any bus terminal VI | min -15 · max 15 V | 9 | |
| High-level input voltage (driver, driver enable, and receiver enable inputs) VIH | Driver input for THVD1451; maximum VCC | min 2 V | 9 |
| Low-level input voltage (driver, driver enable, and receiver enable inputs) VIL | Driver input for THVD1451 | min 0 · max 0.8 V | 9 |
| Differential input voltage VID | min -15 · max 15 V | 9 | |
| Output current, driver IO | min -60 · max 60 mA | 9 | |
| Output current, receiver IOR | min -8 · max 8 mA | 9 | |
| Differential load resistance RL | min 54 Ω | 9 | |
| Signaling rate 1/tUI | THVD1451 | max 50 Mbps | 9 |
| Operating ambient temperature TA | min -40 · max 125 ℃ | 9 | |
| Junction temperature TJ | min -40 · max 150 ℃ | 9 | |
| Junction-to-ambient thermal resistance RθJA | THVD1451, D (SOIC), 8 PINS | typ 114.3 °C/W | 9 |
| Junction-to-case (top) thermal resistance RθJC(top) | THVD1451, D (SOIC), 8 PINS | typ 56.7 °C/W | 9 |
| Junction-to-board thermal resistance RθJB | THVD1451, D (SOIC), 8 PINS | typ 57.7 °C/W | 9 |
| Junction-to-top characterization parameter ΨJT | THVD1451, D (SOIC), 8 PINS | typ 12.8 °C/W | 9 |
| Junction-to-board characterization parameter ΨJB | THVD1451, D (SOIC), 8 PINS | typ 57 °C/W | 9 |
| Power dissipation PD | THVD1451; driver and receiver enabled, VCC = 5.5 V, TA = 1250C as printed, 50% duty cycle square wave at 50Mbps; unterminated: RL = 300 Ω, CL = 50 pF | typ 360 mW | 9 |
| Power dissipation PD | THVD1451; driver and receiver enabled, VCC = 5.5 V, TA = 1250C as printed, 50% duty cycle square wave at 50Mbps; RS-422 load: RL = 100 Ω, CL = 50 pF | typ 320 mW | 9 |
| Power dissipation PD | THVD1451; driver and receiver enabled, VCC = 5.5 V, TA = 1250C as printed, 50% duty cycle square wave at 50Mbps; RS-485 load: RL = 54 Ω, CL = 50 pF | typ 330 mW | 9 |
| Driver differential output voltage magnitude |VOD| | RL = 60 Ω, -15 V ≤ Vtest ≤ 15 V; see 图 20 and footnote (1) | min 1.5 · typ 3.5 V | 10 |
| Driver differential output voltage magnitude |VOD| | RL = 60 Ω, -15 V ≤ Vtest ≤ 15 V, 4.5 V ≤ VCC ≤ 5.5 V; see 图 20 | min 2.1 V | 10 |
| Driver differential output voltage magnitude |VOD| | RL = 100 Ω; see 图 21 | min 2 · typ 4 V | 10 |
| Driver differential output voltage magnitude |VOD| | RL = 54 Ω; see 图 21 | min 1.5 · typ 3.5 V | 10 |
| Change in differential output voltage Δ|VOD| | min -200 · max 200 mV | 10 | |
| Common-mode output voltage VOC | RL = 54 Ω; see 图 21; typical VCC/2 | min 1 · max 3 V | 10 |
| Change in steady-state common-mode output voltage ΔVOC(SS) | min -200 · max 200 mV | 10 | |
| Short-circuit output current IOS | Driver enabled; -7 V ≤ VO ≤ 12 V | min -250 · max 250 mA | 10 |
| Bus input current II | VCC = 0 V or 5.5 V; VI = 12V | typ 50 · max 125 uA | 10 |
| Bus input current II | VCC = 0 V or 5.5 V; VI = -7V | min -100 · typ -65 uA | 10 |
| Bus input current II | VCC = 0 V or 5.5 V; VI = 15V | typ 60 · max 125 uA | 10 |
| Bus input current II | VCC = 0 V or 5.5 V; VI = -15V | min -200 · typ -130 uA | 10 |
| Positive-going input threshold voltage VTH+ | Over common-mode range of ± 15 V; minimum see footnote (2) | typ -100 · max -20 mV | 10 |
| Negative-going input threshold voltage VTH- | Over common-mode range of ± 15 V; maximum see footnote (2) | min -200 · typ -130 mV | 10 |
| Input hysteresis VHYS | Over common-mode range of ± 15 V | typ 30 mV | 10 |
| Output low voltage VOL | IOL = 8 mA | typ 0.2 · max 0.4 V | 10 |
| Input current (D, DE, RE) IIN | D for THVD1451; 3 V ≤ VCC ≤ 5.5 V, 0 V ≤ VIN ≤ VCC | min -6.2 · max 6.2 uA | 10 |
| Supply current (quiescent) ICC | Driver and receiver enabled; no load; typical at 25°C and VCC = 5 V | typ 2.4 · max 3 mA | 10 |
| Thermal shutdown temperature TSD | typ 170 ℃ | 10 | |
| Differential output rise/fall time tr, tf | Driver: THVD1451; RL = 54 Ω, CL = 50 pF; see 图 22; typical at 25°C and VCC = 5 V | min 1 · typ 3 · max 6 ns | 11 |
| Propagation delay tPHL, tPLH | Driver: THVD1451; RL = 54 Ω, CL = 50 pF; see 图 22; typical at 25°C and VCC = 5 V | min 3 · typ 10 · max 20 ns | 11 |
| Pulse skew, |tPHL – tPLH| tSK(P) | Driver: THVD1451; RL = 54 Ω, CL = 50 pF; see 图 22 | max 3.5 ns | 11 |
| Output rise/fall time tr, tf | Receiver: THVD1451; CL = 15 pF; see 图 25; typical at 25°C and VCC = 5 V | typ 2 · max 6 ns | 11 |
| Propagation delay tPHL, tPLH | Receiver: THVD1451; CL = 15 pF; see 图 25; typical at 25°C and VCC = 5 V | typ 25 · max 40 ns | 11 |
| Pulse skew, |tPHL – tPLH| tSK(P) | Receiver: THVD1451; CL = 15 pF; see 图 25 | max 3.5 ns | 11 |

meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller


noahhusby/LINC
The Laboratory Instrument Network Controller (LINC) is a modern network GPIB interface for test equipment

chrischarltoncz/fish_feeder
This is the python code to run the fish feeder which uses mechatronics and compressed air to send food to each individual tank in a fish hotel.


ManSEDS-Satellites-and-Space-Systems/CubeSat-OBC
The version 2 of the C&DH PCB. Features an STM32H743ZGT6 as central proccessor and 32MB of SDRAM.

Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.

Yes. The symbol is Interface_UART:THVD1451D and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C1544481, with 0 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SP3485EN-L/TR by MaxLinear, the SP485EEN-L/TR by MaxLinear, the SN75176BD by Texas Instruments and the MAX485ESA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.
9 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.