Skip to the content
12345678

MAX485ESA+T

Maxim Integrated (Analog Devices)Extended

-40℃~+85℃ 1 1 2.5Mbps 4.75V~5.25V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS

Part id
maxim/MAX485ESA+T
Category
RS 485, RS 422 ICs
Package
SOIC-8
Pins
8
In stock
67,894 at JLCPCB (C19738)
Used on
10 open-source boards

Overview

The MAX485ESA+T is a RS 485, RS 422 IC made by Maxim Integrated (Analog Devices) in a SOIC-8 package with 8 pins. -40℃~+85℃ 1 1 2.5Mbps 4.75V~5.25V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS.

PCBKit's library has its KiCad symbol (Interface_UART:MAX485E, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 67,894 are in stock at JLCPCB (part C19738). 10 open-source boards in 10 repositories on GitHub use it.

Symbol

1RO2RE3DE4DI5GND6A7B8VCC
Interface_UART:MAX485EFrom KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

9
Supply, least
4.75 V · VCC, recommended operating min · p. 7
Supply, most
5.25 V · VCC, recommended operating max · p. 7
Supply, absolute maximum
12 V · VCC, absolute max · p. 2
Works from
-40 °C · Operating ambient min, E grade · p. 2
Works up to
85 °C · Operating ambient max, E grade · p. 2
Takes working
500 µA · VCC no-load supply current typical, DE = VCC · p. 3
Takes at most
900 µA · VCC no-load supply current max, DE = VCC · p. 3
Data rate, most
2.5 Mbit/s · Maximum data rate · p. 3
Edge
15 ns · Driver rise or fall time typical, RDIFF = 54Ω, CL1 = CL2 = 100pF · p. 3

What it is and has

8
Interface
RS-485/RS-422 · p. 1
Duplex
Half · p. 1
Data rate
2.5 Mbps · p. 1
Slew-rate limited
No · p. 1
Low-power shutdown
No · p. 1
Receiver/driver enable
Yes · p. 1
Receivers on bus
32 · p. 1
Pin count
8 · p. 1

Specifications

47
ParameterConditionsAs printedPage
Supply Voltage (VCC) VCCmax 12 V2
Control Input Voltage (RE, DE)Upper limit: VCC + 0.5Vmin -0.5 V2
Driver Input Voltage (DI)Upper limit: VCC + 0.5Vmin -0.5 V2
Driver Output Voltage (A, B)min -8 · max 12.5 V2
Receiver Input Voltage (A, B)min -8 · max 12.5 V2
Receiver Output Voltage (RO)Upper limit: VCC + 0.5Vmin -0.5 V2
Continuous Power Dissipation (TA = +70°C)8-Pin SO; derate 5.88mW/°C above +70°Cmax 471 mW2
Operating Temperature RangesMAX4_ _E_ _/MAX1487E_ A; MAX485ESAmin -40 · max 85 °C2
Storage Temperature Rangemin -65 · max 160 °C2
Lead Temperaturesoldering, 10secmax 300 °C2
Differential Driver Output (no load) VOD1VCC = 5V ±5%, TA = TMIN to TMAXmax 5 V2
Differential Driver Output (with load) VOD2R = 50Ω (RS-422); VCC = 5V ±5%, TA = TMIN to TMAXmin 2 V2
Differential Driver Output (with load) VOD2R = 27Ω (RS-485), Figure 4; VCC = 5V ±5%, TA = TMIN to TMAXmin 1.5 · max 5 V2
Change in Magnitude of Driver Differential Output Voltage for Complementary Output States ΔVODR = 27Ω or 50Ω, Figure 4max 0.2 V2
Driver Common-Mode Output Voltage VOCR = 27Ω or 50Ω, Figure 4max 3 V2
Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States ΔVODR = 27Ω or 50Ω, Figure 4max 0.2 V2
Input High Voltage VIHDE, DI, REmin 2 V2
Input Low Voltage VILDE, DI, REmax 0.8 V2
Input Current IIN1DE, DI, RE; limit ±2 uAmax 2 uA2
Input Current (A, B) IIN2DE = 0V; VCC = 0V or 5.25V; all devices except MAX487/MAX1487; VIN = 12Vmax 1 mA2
Input Current (A, B) IIN2DE = 0V; VCC = 0V or 5.25V; all devices except MAX487/MAX1487; VIN = -7Vmax -0.8 mA2
Receiver Differential Threshold Voltage VTH-7V ≤ VCM ≤ 12Vmin -0.2 · max 0.2 V2
Receiver Input Hysteresis ΔVTHVCM = 0V; typical at VCC = 5V, TA = +25°Ctyp 70 mV2
Receiver Output High Voltage VOHIO = -4mA, VID = 200mVmin 3.5 V2
Receiver Output Low Voltage VOLIO = 4mA, VID = -200mVmax 0.4 V2
Three-State (high impedance) Output Current at Receiver IOZR0.4V ≤ VO ≤ 2.4V; limit ±1 uAmax 1 uA2
Receiver Input Resistance RIN-7V ≤ VCM ≤ 12V, all devices except MAX487/MAX1487min 12 kΩ2
No-Load Supply Current (Note 3) ICCMAX481/MAX485; DE = VCC; RE = 0V or VCC; VCC = 5V ±5%, TA = TMIN to TMAX; typical at VCC = 5V, TA = +25°Ctyp 500 · max 900 uA3
No-Load Supply Current (Note 3) ICCMAX481/MAX485; RE = 0V or VCC; DE = 0V; also valid for loaded transmitters; VCC = 5V ±5%, TA = TMIN to TMAX; typical at VCC = 5V, TA = +25°Ctyp 300 · max 500 uA3
Driver Short-Circuit Current, VO = High IOSD1-7V ≤ VO ≤12V (Note 4); applies to peak currentmin 35 · max 250 mA3
Driver Short-Circuit Current, VO = Low IOSD2-7V ≤ VO ≤12V (Note 4); applies to peak currentmin 35 · max 250 mA3
Receiver Short-Circuit Current IOSR0V ≤ VO ≤ VCCmin 7 · max 95 mA3
Driver Input to Output tPLHFigures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pFmin 10 · typ 30 · max 60 ns3
Driver Input to Output tPHLFigures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pFmin 10 · typ 30 · max 60 ns3
Driver Output Skew to Output tSKEWFigures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pFtyp 5 · max 10 ns3
Driver Rise or Fall Time tR, tFMAX481, MAX485, MAX1487; Figures 6 and 8, RDIFF = 54Ω, CL1 = CL2 = 100pFmin 3 · typ 15 · max 40 ns3
Driver Enable to Output High tZHFigures 7 and 9, CL = 100pF, S2 closedtyp 40 · max 70 ns3
Driver Enable to Output Low tZLFigures 7 and 9, CL = 100pF, S1 closedtyp 40 · max 70 ns3
Driver Disable Time from Low tLZFigures 7 and 9, CL = 15pF, S1 closedtyp 40 · max 70 ns3
Driver Disable Time from High tHZFigures 7 and 9, CL = 15pF, S2 closedtyp 40 · max 70 ns3
Receiver Input to Output tPLH, tPHLMAX481, MAX485, MAX1487; Figures 6 and 10, RDIFF = 54Ω, CL1 = CL2 = 100pFmin 20 · typ 90 · max 200 ns3
| tPLH - tPHL | Differential Receiver Skew tSKDFigures 6 and 10, RDIFF = 54Ω, CL1 = CL2 = 100pFtyp 13 ns3
Receiver Enable to Output Low tZLFigures 5 and 11, CRL = 15pF, S1 closedtyp 20 · max 50 ns3
Receiver Enable to Output High tZHFigures 5 and 11, CRL = 15pF, S2 closedtyp 20 · max 50 ns3
Receiver Disable Time from Low tLZFigures 5 and 11, CRL = 15pF, S1 closedtyp 20 · max 50 ns3
Receiver Disable Time from High tHZFigures 5 and 11, CRL = 15pF, S2 closedtyp 20 · max 50 ns3
Maximum Data Rate fMAXmin 2.5 Mbps3

Pins, by the datasheet

8
1 RO
Receiver output; high if A > B by 200mV, low if A < B by 200mV. · p. 7
2 RE
Receiver output enable; low enables RO, high makes RO high impedance. · p. 7
3 DE
Driver output enable; high enables driver outputs, low makes them high impedance. · p. 7
4 DI
Driver input; low forces the noninverting output low and inverting output high, and high reverses them. · p. 7
5 GND
Ground. · p. 7
6 A
Noninverting receiver input and noninverting driver output. · p. 7
7 B
Inverting receiver input and inverting driver output. · p. 7
8 VCC
Positive supply: 4.75V ≤ VCC ≤ 5.25V. · p. 7

Open-source boards using it

10See all 10
  • 2 layers55 × 55 mmLeafNode v3.1, the printed circuit board in 3D

    LeafNode v3.1

    leafai-io/leaf-node-v3.x

    Modular node for sensor monitoring and device control in grow environments.

    91 parts47
  • 2 layers49 × 71 mmSonpakharu, the printed circuit board in 3D

    Sonpakharu

    bkrajendra/sonpakharu

    Wireless Data Aggregation System using the ESP-32 S3

    71 parts
  • 2 layers82 × 86 mmWhips PCB, the printed circuit board in 3D

    Whips PCB

    jspolsky/Antenna2024

    Future Turtles 2024 Public LED Display ====

    33 parts
  • 2 layers50.8 × 83.6 mmWhips PCB, the printed circuit board in 3D

    Whips PCB

    jspolsky/Antenna2026

    Future Turtles 2026 Public LED Display ====

    17 parts
  • 2 layersEsp32industrial, the printed circuit board in 3D

    Esp32industrial

    Karma7272-cmd/ESP-32-kicad-design

    A collection of my electronics circuits, PCB designs, and hardware projects in a single repository.

    28 parts
  • 2 layers118.3 × 68 mmField eyes v2.before spreading, the printed circuit board in 3D

    Field eyes v2.before spreading

    louismomo66/field-eyes_pcb

    Open fieldeyesv2.kicadpro in KiCad 9. The whole circuit is one flat schematic (fieldeyesv2.kicadsch): all 168 parts are on a single page, in four framed sections.

    168 parts
  • 2 layers69 × 53.8 mmTrailerMonitor, the printed circuit board in 3D

    TrailerMonitor

    MikeMcPherson/TrailerMonitor

    22 partsMIT
  • 2 layers155.7 × 86.3 mmOverlord, the printed circuit board in 3D

    Overlord

    Nimfrodian/Overlord

    Code repository for the Overlord home automation system

    230 partsGPL-3.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX485ESA+T?

Yes. The symbol is Interface_UART:MAX485E and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX485ESA+T?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MAX485ESA+T datasheet?

Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.

Where can I order the MAX485ESA+T?

JLCPCB lists it as part C19738, with 67,894 in stock; the sellers' links on this page open their listings.

What can replace the MAX485ESA+T?

Parts like it in the library: the SP3485EN-L/TR by MaxLinear, the SP485EEN-L/TR by MaxLinear, the SN75176BD by Texas Instruments and the MAX13487EESA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX485ESA+T?

10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.