
PicoGamePad indev
Michael-Lloyd/PicoGamePad
RP2040 Gamepad and Microcontroller Breakout Board. Type A is used for teaching students to reflow SMD @ UNSW Makerspaces.

Wireless Data Aggregation System using the ESP-32 S3
Sonpakharu is an open-source printed circuit board by bkrajendra, from the bkrajendra/sonpakharu repository on GitHub. It is a 2-layer board of 49 × 71 mm with 71 parts on 65 nets, routed with 666 tracks and 197 vias.
It is built around the ESP32-S3-WROOM-1U-N16R2, MAX485ESA+T and DS3231MZ+, with the MCP73831-2ACI/OT, MIC5219-3.3YM5 and FS18F105Z160PBG among its other parts. Its parts include 16 resistors, 12 capacitors, 9 connectors, 6 ICs and 6 diodes. It belongs with the ESP32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 10k | Resistor_SMD:R_0805_2012Metric | R3, R5, R6, R7, R8, R11, R12, R13, R14 |
| 5 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C10, C11, C12 |
| 5 | MBR0540 | Diode_SMD:D_SOD-123 | D1, D3, D4, D5, D6 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad_Via | H1, H2, H4 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C8, C9 |
| 2 | 10uf | Capacitor_SMD:C_0805_2012Metric | C4, C5 |
| 2 | 20K | Resistor_SMD:R_0805_2012Metric | R15, R16 |
| 2 | BC847 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 1 | 0 | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 0.1uf | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 10E | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | RPOG1 |
| 1 | 2.2uf | Capacitor_Tantalum_SMD:CP_EIA-2012-12_Kemet-R_Pad1.30x1.05mm_HandSolder | C7 |
| 1 | 3k9 | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 470pf | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | 485 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | MBUS |
| 1 | 5.1K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | BATT | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | LIPO1 |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | Boot | Button_Switch_SMD:TACTILE SWITCH 3X4X2MM SMD | Boot1 |
| 1 | Charging | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | BUZIN1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BUZ1 |
| 1 | DS3231M | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | ESP PRG | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | ESPPRG1 |
| 1 | ESP32-S3-WROOM-1U-N4 | KiCad:ESP32S3WROOM1UN4 | IC1 |
| 1 | EXT1 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | EXT2 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | EXT3 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | EXT4 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | EXT5 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | EXT6 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | EXT7 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | EXT8 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | FerriteBead | Inductor_SMD:L_0805_2012Metric | FB |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | I2C1 |
| 1 | INT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | RTC_INT1 |
| 1 | LOGO | logo:sonpakaharu | spb |
| 1 | LOWBAT | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | LB |
| 1 | MAX17048G_T10 | MAX17048G_T10:SON50P200X200X80-9N | U4 |
| 1 | MAX485E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | MIC5219-3.3YM5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | ON/OFF | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | PMV32UP | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | PWR | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Reset | Button_Switch_SMD:TACTILE SWITCH 3X4X2MM SMD | Reset1 |
| 1 | mounting hole | MountingHole:MountingHole_3mm_Pad_Via | H3 |

Michael-Lloyd/PicoGamePad
RP2040 Gamepad and Microcontroller Breakout Board. Type A is used for teaching students to reflow SMD @ UNSW Makerspaces.

tiancilliers/esl-gsu
Satellite interfacing kit in development by the ESL (Electronic Systems Lab)

Circuit-Digest/MLX90640-Thermal-Camera
An Open Source Thermal Imaging IR camera that you can build yourserlf



Infinity6542/CSI-Collection-Utility
Suitable for use in a microwave :) (just dont turn it on).

risingtideresearch/CAN-Gateway
Platform for collecting, logging, interpreting, and relaying CAN messages on multiple busses

risingtideresearch/CAN-Power-Control
CAN device for switching high-current DC loads and reading sensors and switch closures
It measures 49 × 71 mm and has 2 copper layers, 1.6 mm thick.
71 parts, built around the ESP32-S3-WROOM-1U-N16R2, MAX485ESA+T, DS3231MZ+ and MCP73831-2ACI/OT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bkrajendra/sonpakharu repository on GitHub, at the commit this page was made from: the board is hardware/sonpakharu.kicad_pcb and its schematic hardware/sonpakharu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bkrajendra before reusing the design.