Skip to the content
4 layers68.9 × 37.6 mmPicoGamePad indev, the printed circuit board in 3D

RP2040 Gamepad and Microcontroller Breakout Board. Type A is used for teaching students to reflow SMD @ UNSW Makerspaces.

Size
68.9 × 37.6 mm
Copper layers
4
Thickness
1.02 mm
Parts
54
Nets
58
Pads
245
Tracks, vias
682, 208
Pours
8
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
3 Sep 2022
Updated
17 Oct 2022

Overview

PicoGamePad indev is an open-source printed circuit board by Michael-Lloyd, from the Michael-Lloyd/PicoGamePad repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 68.9 × 37.6 mm with 54 parts on 58 nets, routed with 682 tracks and 208 vias.

It is built around the RP2040, MBR0540 and TLC-NSMD075, with the WS2812B and X322512MMB4SI among its other parts. Its parts include 18 capacitors, 8 switches, 7 resistors, 3 ICs and 2 connectors. It belongs with the keyboards and input and retro computing and games boards and the RP2040 boards of this library.

Main components

5

README

README.md

This is the main development branch for the Electronics Induction.

[blocked]  [blocked]  [blocked]  [blocked]  [blocked]  [blocked] 

About

This section is still a work in progress. I need to finish some other things first.


Parts

54
QtyValueFootprintReferences
10100nFCapacitor_SMD:C_0805_2012MetricC7, C9, C10, C12, C13, C14, C15, C16, C17, C18
41μFCapacitor_SMD:C_0805_2012MetricC1, C4, C8, C11
210μFCapacitor_SMD:C_1206_3216MetricC2, C3
214pFCapacitor_SMD:C_0805_2012MetricC5, C6
227ΩResistor_SMD:R_0603_1608MetricR2, R3
25.1kΩResistor_SMD:R_0805_2012MetricR1, R5
1
10,0Fiducial:Fiducial_1mm_Mask2mmFID2
10,1Fiducial:Fiducial_1mm_Mask2mmFID1
11,0Fiducial:Fiducial_1mm_Mask2mmFID3
110kΩResistor_SMD:R_0805_2012MetricR6
11k?Resistor_SMD:R_0805_2012MetricR7
1A0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW6
1ASM1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1B0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW4
1C116159Connector_USB:USB_C_Receptacle_Palconn_UTC16-GJ1
1C261953Fuse:Fuse_1206_3216MetricF1
1Conn_01x02Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJP1
1Conn_02x03Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_VerticalJP2
1DOWN0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW1
1LDO_{VIN}0:Testpoint_CustomTP10
1LDO_{VOUT}0:Testpoint_CustomTP9
1LED DATA0:Testpoint_CustomTP5
1LEFT0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW3
1MCU 1v20:Testpoint_CustomTP2
1MCU 3v30:Testpoint_CustomTP1
1RResistor_SMD:R_0805_2012MetricR4
1RBP_GPIO_CONNConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ3
1RIGHT0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW7
1RP2040Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mmU4
1SELECT0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW8
1START0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW2
1UP0:SW_TSC016XXXXXXX_4.5x3.0_H2.75SW5
1VBUS0:Testpoint_CustomTP8
1WQ25JVS0:FLASH-SOIC-8U3
1WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmLED1
1X322512MMB4SICrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1

The 53 most common of 54 parts.

Similar boards

  • 2 layers33.6 × 29.3 mmKeyChain, the printed circuit board in 3D

    KeyChain

    Brammert42/EPKeychain

    A keychain equipped with a RP2040 and a E-ink

    71 parts
  • 2 layers49 × 71 mmSonpakharu, the printed circuit board in 3D

    Sonpakharu

    bkrajendra/sonpakharu

    Wireless Data Aggregation System using the ESP-32 S3

    71 parts
  • 4 layers82.6 × 82.5 mmJumperless2, the printed circuit board in 3D

    Jumperless2

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    208 parts914
  • 4 layers94.4 × 72.8 mmRP2040 base, the printed circuit board in 3D

    RP2040 base

    Twisted-Fields/rp2040-motor-controller

    A dual channel brushless motor controller based on the RP2040 microcontroller, designed in Kicad.

    325 parts419
  • 2 layers285 × 94.6 mmPH60 Rev3, the printed circuit board in 3D

    PH60 Rev3

    ph-design/PH60

    A printable 60% multi-layout wireless keyboard suite.

    264 parts163
  • 2 layers285 × 94.6 mmPH60Slim Choc, the printed circuit board in 3D

    PH60Slim Choc

    ph-design/PH60-SC

    A printable low-profile 60% wireless mechanical keyboard kit powered by ZMK firmware.

    219 parts132
  • 4 layers137 × 141 mmPcb panel, the printed circuit board in 3D

    Pcb panel

    0xCB-dev/0xCB-1337

    Mechanical macropad with OLED running QMK

    485 parts61
  • 2 layers220 × 70 mmBemini rp, the printed circuit board in 3D

    Bemini rp

    ianklug/bemini

    A miniature mechanical keyboard controller with a rotary encoder for staggered-key rhythm games.

    70 parts55CC-BY-SA-4.0

Questions

How big is the PicoGamePad indev PCB?

It measures 68.9 × 37.6 mm and has 4 copper layers, 1.02 mm thick.

What parts does the PicoGamePad indev use?

54 parts, built around the RP2040, MBR0540, TLC-NSMD075 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoGamePad indev KiCad files?

From the Michael-Lloyd/PicoGamePad repository on GitHub, at the commit this page was made from: the board is hardware/PicoGamePad_indev.kicad_pcb and its schematic hardware/PicoGamePad_indev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoGamePad indev design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).