Skip to the content
12345678

SN75176BD

Texas InstrumentsJLCPCB preferred

0℃~+70℃ 1 1 4.75V~5.25V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS

Part id
ti/SN75176BD
Category
RS 485, RS 422 ICs
Package
SOIC-8
Pins
8
In stock
175,441 at JLCPCB (C7063)
Used on
3 open-source boards

Overview

The SN75176BD is a RS 485, RS 422 IC made by Texas Instruments in a SOIC-8 package with 8 pins. 0℃~+70℃ 1 1 4.75V~5.25V Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS.

PCBKit's library has its KiCad symbol (dk_Interface-Drivers-Receivers-Transceivers:SN75176BDR, from Digikey) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 175,441 are in stock at JLCPCB (part C7063). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1R2RE3DE4D5GND6A7B8VCC
dk_Interface-Drivers-Receivers-Transceivers:SN75176BDRFrom Digikey

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

13
Supply, least
4.75 V · VCC, recommended operating, min · p. 4
Supply, most
5.25 V · VCC, recommended operating, max · p. 4
Supply, absolute maximum
7 V · VCC, absolute maximum · p. 4
Works from
0 °C · SN75176B operating free-air temperature, min · p. 4
Works up to
70 °C · SN75176B operating free-air temperature, max · p. 4
Junction, hottest
150 °C · Operating virtual junction temperature, absolute maximum · p. 4
Takes working
42 mA · VCC total package, outputs enabled, no load, 5 V, 25°C, typical · p. 5
Takes at most
70 mA · VCC total package, driver outputs enabled, no load, max · p. 5
A pin gives at most
60 mA · Driver bus output, sink or source, max · p. 12
Junction to air (D (SOIC))
114.4 K/W · Junction-to-ambient thermal resistance · p. 4
Junction to board (D (SOIC))
61.6 K/W · Junction-to-board thermal resistance · p. 4
Junction to case (D (SOIC))
55.1 K/W · Junction-to-case top thermal resistance · p. 4
Edge
20 ns · Driver differential-output transition, VCC = 5 V, RL = 54 Ω, 25°C, typical · p. 6

Open-source boards using it

3
  • 2 layersWiggle spine, the printed circuit board in 3D

    Wiggle spine

    gitter-badger/wiggleport

    Modular I/O for multi-channel sound, light, and motion

    173 partsMIT
  • 2 layers35 × 14 mmDongle, the printed circuit board in 3D

    Dongle

    iTeleTram/dongle_hw

    USB to DCC dongle hardware schematics for KiCad

    39 partsApache-2.0
  • 2 layers70 × 79 mmIntegrated circuits, the printed circuit board in 3D

    Integrated circuits

    LilyTronics/lily_kicad_lib

    KiCad library by LilyTronics

    37 parts2MIT

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN75176BD?

Yes. The symbol is dk_Interface-Drivers-Receivers-Transceivers:SN75176BDR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN75176BD?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the SN75176BD datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the SN75176BD?

JLCPCB lists it as part C7063, with 175,441 in stock; the sellers' links on this page open their listings.

What can replace the SN75176BD?

Parts like it in the library: the SP3485EN-L/TR by MaxLinear, the SP485EEN-L/TR by MaxLinear, the MAX485ESA+T by Maxim Integrated (Analog Devices) and the MAX13487EESA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN75176BD?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.