
P2 Kevinbot Board
meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller

Sound camera is an open-source printed circuit board by gagnonsilas, from the gagnonsilas/sound-camera repository on GitHub. It is a 4-layer board of 40 × 15 mm with 33 parts on 44 nets, routed with 263 tracks and 80 vias.
It is built around the THVD1451D. Its parts include 9 capacitors, 4 resistors, 4 connectors, 3 ICs and 3 diodes. It belongs with the audio and music boards and the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10u | Capacitor_SMD:C_0402_1005Metric | C3, C12, C15, C16 |
| 4 | R_Small | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2, C13 |
| 3 | GND | goatworks-footprint-library:tp-ev24 | TP2, TP7, TP8 |
| 2 | Conn_01x04_MountingPin | goatworks-footprint-library:CONN04_5055670471_MOL | J1, J2 |
| 2 | LED | Diode_SMD:D_0402_1005Metric | D2, D3 |
| 2 | ~ | goatworks-footprint-library:T3902 | M3, M4 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C11 |
| 1 | 3V3 | goatworks-footprint-library:tp-ev24 | TP6 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 5V | goatworks-footprint-library:tp-ev24 | TP5 |
| 1 | AP2210 | Package_TO_SOT_SMD:SOT-23-3 | U3 |
| 1 | CLK | goatworks-footprint-library:tp-ev24 | TP1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J4 |
| 1 | DEBUG | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | SD | goatworks-footprint-library:tp-ev24 | TP4 |
| 1 | STM32G0B1KBUx | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U2 |
| 1 | Speaker_Crystal | goatworks-footprint-library:PKMCS0909E4000-R1 | LS1 |
| 1 | THVD1451 | Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm | U1 |
| 1 | TVS | Package_TO_SOT_SMD:SOT-23-3 | D1 |

meowmeowahr/KevinbotV3-KiCAD
Kevinbot Core - Parallax Propeller 2 Robot Controller

noahhusby/LINC
The Laboratory Instrument Network Controller (LINC) is a modern network GPIB interface for test equipment

chrischarltoncz/fish_feeder
This is the python code to run the fish feeder which uses mechatronics and compressed air to send food to each individual tank in a fish hotel.


ManSEDS-Satellites-and-Space-Systems/CubeSat-OBC
The version 2 of the C&DH PCB. Features an STM32H743ZGT6 as central proccessor and 32MB of SDRAM.

Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.


It measures 40 × 15 mm and has 4 copper layers, 1.6 mm thick.
33 parts, built around the THVD1451D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the gagnonsilas/sound-camera repository on GitHub, at the commit this page was made from: the board is pcb/pcb.kicad_pcb and its schematic pcb/pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask gagnonsilas before reusing the design.