
Rs485-moist sensor pannel
Miceuz/rs485-moist-sensor
Digital (RS485 - based) soil moisture and temperature sensor
Texas InstrumentsExtended
-40℃~+125℃ 1 1 250Kbps 256 3V~3.6V 950uA Half-Duplex Transceiver ±15kV SOIC-8 RS-485 / RS-422 ICs ROHS
The SN65HVD72D is a RS 485, RS 422 IC made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1 1 250Kbps 256 3V~3.6V 950uA Half-Duplex Transceiver ±15kV SOIC-8 RS-485 / RS-422 ICs ROHS.
PCBKit's library has its KiCad symbol (EasyEDA_Pro:SN65HVD72DR, from EasyEDA Pro) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 13,682 are in stock at JLCPCB (part C48125). 8 open-source boards in 7 repositories on GitHub use it.
| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Supply voltage, VCC VCC | Over recommended operating range | min -0.5 · max 5 V | 5 |
| Voltage at A or B inputs | Over recommended operating range | min -13 · max 16.5 V | 5 |
| Voltage at D, DE, or RE | Over recommended operating range | min -0.3 · max 5.7 V | 5 |
| Voltage input, transient pulse, A and B, through 100 Ω | min -100 · max 100 V | 5 | |
| Receiver output current | min -24 · max 24 mA | 5 | |
| Junction temperature, TJ TJ | max 170 °C | 5 | |
| Storage temperature, Tstg Tstg | min -65 · max 150 °C | 5 | |
| Electrostatic discharge V(ESD) | Human body model (HBM), per ANSI/ESDA/JEDEC JS-001, all pins; ± rating | max 8000 V | 5 |
| Electrostatic discharge V(ESD) | Charged device model (CDM), per JEDEC specification JESD22-C101 or ANSI/ESDA/JEDEC JS-002, all pins; ± rating | max 1500 V | 5 |
| Electrostatic discharge V(ESD) | JEDEC Standard 22, Test Method A115 (Machine Model), all pins; ± rating | max 300 V | 5 |
| Electrostatic discharge V(ESD) | IEC 61000-4-2 ESD (Air-Gap Discharge), bus pins and GND; ± rating | max 12000 V | 5 |
| Electrostatic discharge V(ESD) | IEC 61000-4-2 ESD (Contact Discharge), bus pins and GND; ± rating | max 12000 V | 5 |
| Electrostatic discharge V(ESD) | IEC 61000-4-4 EFT (Fast transient or burst) bus pins and GND; ± rating | max 4000 V | 5 |
| Electrostatic discharge V(ESD) | IEC 60749-26 ESD (Human Body Model), bus pins and GND; ± rating | max 15000 V | 5 |
| Supply voltage VCC | min 3 · typ 3.3 · max 3.6 V | 5 | |
| Input voltage at any bus terminal (separately or common mode) VI | min -7 · max 12 V | 5 | |
| High-level input voltage (driver, driver enable, and receiver enable inputs) VIH | Maximum VCC | min 2 V | 5 |
| Low-level input voltage (driver, driver enable, and receiver enable inputs) VIL | min 0 · max 0.8 V | 5 | |
| Differential input voltage VID | min -12 · max 12 V | 5 | |
| Output current, driver IO | min -60 · max 60 mA | 5 | |
| Output current, receiver IO | min -8 · max 8 mA | 5 | |
| Differential load resistance RL | min 54 · typ 60 Ω | 5 | |
| Differential load capacitance CL | typ 50 pF | 5 | |
| Signaling rate 1/tUI | SN65HVD72 | max 250 kbps | 5 |
| Operating free-air temperature (See Thermal Information) TA | min -40 · max 125 °C | 5 | |
| Junction temperature TJ | min -40 · max 150 °C | 5 | |
| Junction-to-ambient thermal resistance RθJA | D (SOIC), 8 pins | typ 110.7 °C/W | 6 |
| Junction-to-case (top) thermal resistance RθJC(top) | D (SOIC), 8 pins | typ 54.7 °C/W | 6 |
| Junction-to-board thermal resistance RθJB | D (SOIC), 8 pins | typ 51.3 °C/W | 6 |
| Junction-to-top characterization parameter ψJT | D (SOIC), 8 pins | typ 9.2 °C/W | 6 |
| Junction-to-board characterization parameter ψJB | D (SOIC), 8 pins | typ 50.7 °C/W | 6 |
| Driver differential output voltage magnitude |VOD| | RL = 60 Ω, 375 Ω on each output to –7 V to 12 V; See Figure 10 | min 1.5 · typ 2 V | 6 |
| Driver differential output voltage magnitude |VOD| | RL = 100 Ω (RS-422), TJ ≥ 0°C, VCC ≥ 3.2 V | min 2 · typ 2.5 V | 6 |
| Change in magnitude of driver differential output voltage Δ|VOD| | RL = 54 Ω, CL = 50 pF | min -50 · typ 0 · max 50 mV | 6 |
| Change in differential driver output common-mode voltage ΔVOC | Center of two 27-Ω load resistors | min -50 · typ 0 · max 50 mV | 6 |
| Peak-to-peak driver common-mode output voltage VOC(PP) | Center of two 27-Ω load resistors | typ 200 mV | 6 |
| Differential output capacitance COD | typ 15 pF | 6 | |
| Positive-going receiver differential input voltage threshold VIT+ | Minimum: See (1) | typ -70 · max -20 mV | 6 |
| Negative-going receiver differential input voltage threshold VIT– | Maximum: See (1) | min -200 · typ -150 mV | 6 |
| Receiver differential input voltage threshold hysteresis (VIT+ – VIT–) VHYS | min 50 · typ 80 mV | 6 | |
| Receiver high-level output voltage VOH | IOH = –8 mA; typical VCC – 0.3 | min 2.4 V | 6 |
| Receiver low-level output voltage VOL | IOL = 8 mA | typ 0.2 · max 0.4 V | 6 |
| Driver input, driver enable, and receiver enable input current II | min -2 · max 2 uA | 6 | |
| Receiver output high-impedance current IOZ | VO = 0 V or VCC, RE at VCC | min -1 · max 1 uA | 6 |
| Driver short-circuit output current IOS | min -160 · max 160 mA | 6 | |
| Bus input current (disabled driver) II | SN65HVD72; VCC = 3 to 3.6 V or VCC = 0 V; DE at 0 V; VI = 12 V | typ 75 · max 150 uA | 7 |
| Bus input current (disabled driver) II | SN65HVD72; VCC = 3 to 3.6 V or VCC = 0 V; DE at 0 V; VI = –7 V | min -100 · typ -40 uA | 7 |
| Supply current (quiescent) ICC | Driver and receiver enabled; DE = VCC, RE = GND; No load | typ 750 · max 950 uA | 7 |
| Supply current (quiescent) ICC | Driver enabled, receiver disabled; DE = VCC, RE = VCC; No load | typ 300 · max 500 uA | 7 |
| Supply current (quiescent) ICC | Driver disabled, receiver enabled; DE = GND, RE = GND; No load | typ 600 · max 800 uA | 7 |
| Supply current (quiescent) ICC | Driver and receiver disabled; DE = GND, D = open; RE = VCC, No load | typ 0.1 · max 2 uA | 7 |
| Thermal shutdown junction temperature TTSD | typ 170 °C | 7 | |
| Power Dissipation PD | SN65HVD72; Unterminated; RL = 300 Ω, CL = 50 pF (driver); driver and receiver enabled, VCC = 3.6 V, TJ = 150°C; 50% duty cycle square-wave signal at 250 kbps | typ 120 mW | 7 |
| Power Dissipation PD | SN65HVD72; RS-422 load; RL = 100 Ω, CL = 50 pF (driver); driver and receiver enabled, VCC = 3.6 V, TJ = 150°C; 50% duty cycle square-wave signal at 250 kbps | typ 155 mW | 7 |
| Power Dissipation PD | SN65HVD72; RS-485 load; RL = 54 Ω, CL = 50 pF (driver); driver and receiver enabled, VCC = 3.6 V, TJ = 150°C; 50% duty cycle square-wave signal at 250 kbps | typ 190 mW | 7 |
| Driver differential output rise or fall time tr, tf | RL = 54 Ω, CL = 50 pF; See Figure 12 | min 0.3 · typ 0.7 · max 1.2 us | 7 |
| Driver propagation delay tPHL, tPLH | RL = 54 Ω, CL = 50 pF; See Figure 12 | typ 0.7 · max 1 us | 7 |
| Driver pulse skew, |tPHL – tPLH| tSK(P) | RL = 54 Ω, CL = 50 pF; See Figure 12 | max 0.2 us | 7 |
| Driver disable time tPHZ, tPLZ | See Figure 13 and Figure 14 | typ 0.1 · max 0.4 us | 7 |
| Driver enable time tPZH, tPZL | Receiver enabled; See Figure 13 and Figure 14 | typ 0.5 · max 1 us | 7 |
| Driver enable time tPZH, tPZL | Receiver disabled; See Figure 13 and Figure 14 | typ 3 · max 9 us | 7 |
| Receiver output rise or fall time tr, tf | CL = 15 pF; See Figure 15 | typ 12 · max 30 ns | 7 |
| Receiver propagation delay time tPHL, tPLH | CL = 15 pF; See Figure 15 | typ 75 · max 100 ns | 7 |
| Receiver pulse skew, |tPHL – tPLH| tSK(P) | CL = 15 pF; See Figure 15 | typ 3 · max 15 ns | 7 |
| Receiver disable time tPLZ, tPHZ | See Figure 16 | typ 40 · max 100 ns | 7 |
| Receiver enable time tPZL(1), tPZH(1) | Driver enabled; See Figure 16 | typ 20 · max 50 ns | 7 |
| Receiver enable time tPZL(2), tPZH(2) | Driver disabled; See Figure 17 | typ 3 · max 8 us | 7 |

Miceuz/rs485-moist-sensor
Digital (RS485 - based) soil moisture and temperature sensor

RainDrop-lora/raindrop
Soil moisture monitoring system on LoRaWAN network

Miceuz/rs485-breakout
A tiny development board to quickly prototype RS485/Modbus devices


Technariumas/smalsiukas
The conversion of a forklift truck to a line following robot.


punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

Technariumas/smalsiukas
The conversion of a forklift truck to a line following robot.
Yes. The symbol is EasyEDA_Pro:SN65HVD72DR and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C48125, with 13,682 in stock; the sellers' links on this page open their listings.
Parts like it in the library: the SP3485EN-L/TR by MaxLinear, the SP485EEN-L/TR by MaxLinear, the SN75176BD by Texas Instruments and the MAX485ESA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.
8 boards in 7 repositories on GitHub; the most starred are listed on this page, with their KiCad files.