
Rs485-moist sensor pannel
Miceuz/rs485-moist-sensor
Digital (RS485 - based) soil moisture and temperature sensor

A tiny development board to quickly prototype RS485/Modbus devices
Rs485-breakout is an open-source printed circuit board by Miceuz, from the Miceuz/rs485-breakout repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 25.2 × 60.5 mm with 33 parts on 38 nets, routed with 178 tracks and 44 vias.
It is built around the ATTINY441-SSU, SN65HVD72D and RJ45. Its parts include 7 capacitors, 5 connectors, 3 resistors, 3 ICs and 1 diode. It belongs with the interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
A tiny development board to quickly prototype RS485/Modbus devices
When building RS485/Modbus networks I have identified a need for a platform that would allow me to put various additional sensors or actuators on the network. Like relays to switch stuff, temperature, humidity sensors or other devices that don't have a native Modbus interface.
This board allows interfacing to different digital busses or analog devices.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C6, C7, C8, C9 |
| 4 | MountingHole | Mounting_Holes:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R3, R9 |
| 3 | Conn_01x08 | Pin_Headers:Pin_Header_Straight_2x05_Pitch2.54mm | J1, J3, J4 |
| 2 | 13p | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Fiducial | Fiducials:Fiducial_1mm_Dia_2mm_Outer | FID1, FID2 |
| 1 | 16MHz | Crystals:Crystal_SMD_3225-4pin_3.2x2.5mm | X1 |
| 1 | ATTINY441-SSU | Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mm | IC1 |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | P1 |
| 1 | LOGO | miceuz-lib:catnip | G*** |
| 1 | MCP1702 | Package_TO_SOT_SMD:SOT-23 | U2 |
| 1 | NUP4004M5T1G | Package_TO_SOT_SMD:SOT-23-5 | D4 |
| 1 | Q_PMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J2 |
| 1 | SN65HVD72 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
The 28 most common of 33 parts.

Miceuz/rs485-moist-sensor
Digital (RS485 - based) soil moisture and temperature sensor

punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark

Technariumas/smalsiukas
The conversion of a forklift truck to a line following robot.

RainDrop-lora/raindrop
Soil moisture monitoring system on LoRaWAN network



Miceuz/i2c-moisture-sensor
I2C based soil moisture sensor

It measures 25.2 × 60.5 mm and has 2 copper layers, 1.6 mm thick.
33 parts, built around the ATTINY441-SSU, SN65HVD72D and RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Miceuz/rs485-breakout repository on GitHub, at the commit this page was made from: the board is rs485-breakout.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).