Skip to the content
123456789

LMR33630ADDA

Texas InstrumentsExtended

-40℃~+125℃@(TJ) 1 1V~24V 24uA 3.8V~36V 3A 400kHz Adjustable Buck Buck Built-in Yes ESOP-8 DC-DC Converters ROHS

Part id
ti/LMR33630ADDA
Category
DC DC Converters
Package
ESOP-8
Pins
9
In stock
28,851 at JLCPCB (C841384)
Used on
41 open-source boards

Overview

The LMR33630ADDA is a DC DC Converter made by Texas Instruments in a ESOP-8 package with 9 pins. -40℃~+125℃@(TJ) 1 1V~24V 24uA 3.8V~36V 3A 400kHz Adjustable Buck Buck Built-in Yes ESOP-8 DC-DC Converters ROHS.

PCBKit's library has its KiCad symbol (Regulator_Switching:LMR33630ADDA, from KiCad's library) and its footprint (Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 28,851 are in stock at JLCPCB (part C841384). 41 open-source boards in 34 repositories on GitHub use it.

Symbol

1GND2VIN3EN4PG5FB6VCC7BOOT8SW
Regulator_Switching:LMR33630ADDAFrom KiCad's library

Footprint

123456789
Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

14
Supply, least
3.8 V · VIN, recommended operating minimum · p. 6
Supply, most
36 V · VIN, recommended operating maximum · p. 6
Supply, absolute maximum
38 V · VIN to PGND, absolute maximum · p. 6
Junction, hottest
150 °C · Junction temperature, absolute maximum · p. 6
Takes working
25 µA · VIN, typical input current in regulation, 12 V input, 3.3 V output, no load · p. 9
Takes asleep
5 µA · VIN, typical shutdown current, EN = 0 · p. 7
Gives
3 A · IOUT, maximum continuous output current · p. 6
Current limit
4.5 A · Typical high-side current limit, open-loop test · p. 7
Feedback reference
1 V · FB, typical adjustable feedback voltage · p. 7
Dropout
150 mV · Typical dropout at 1 A, 5 V output, 140 kHz, –1% regulation · p. 9
Switches at
400 kHz · Typical switching frequency, A version · p. 8
Junction to air (DDA (HSOIC))
42.9 K/W · Junction-to-ambient thermal resistance, JEDEC board · p. 7
Junction to board (DDA (HSOIC))
13.6 K/W · Junction-to-board thermal resistance · p. 7
Junction to case (DDA (HSOIC))
54 K/W · Junction-to-case top thermal resistance · p. 7

What it is and has

6
Input voltage range
3.8 V to 36 V · p. 1
Output voltage range
1 V to 24 V · p. 1
Output current
3 A · p. 1
Control
Peak-current-mode control · p. 1
Compensation
Integrated compensation network · p. 1
Junction temperature range
–40°C to +125°C · p. 1

Around it

2
cap 1-µF
between VCC and GND; High-quality capacitor at VCC. · p. 5
cap 100-nF
between BOOT and SW; High-quality bootstrap capacitor. · p. 5

Specifications

69
ParameterConditionsAs printedPage
VIN to PGNDOver the recommended operating junction temperature rangemin -0.3 · max 38 V6
EN to AGNDMaximum VIN + 0.3 Vmin -0.3 V6
FB to AGNDmin -0.3 · max 5.5 V6
PG to AGNDMust not exceed VIN by more than 0.3 Vmin 0 · max 22 V6
AGND to PGNDmin -0.3 · max 0.3 V6
SW to PGNDMaximum VIN + 0.3 Vmin -0.3 V6
SW to PGND less than 100-ns transientsLess than 100-ns transientsmin -3.5 · max 38 V6
BOOT to SWmin -0.3 · max 5.5 V6
VCC to AGNDUnder some operating conditions the VCC LDO voltage may increase beyond 5.5Vmin -0.3 · max 5.5 V6
Junction temperature TJmin -40 · max 150 °C6
Storage temperature Tstgmin -55 · max 150 °C6
Electrostatic discharge V(ESD)Human-body model (HBM); ±2500 V ratingmax 2500 V6
Electrostatic discharge V(ESD)Charged-device model (CDM); ±750 V ratingmax 750 V6
Input voltage VINVIN to PGNDmin 3.8 · max 36 V6
Input voltage ENMaximum VIN; must not exceed VIN by more than 0.3 Vmin 0 V6
Input voltage PGMust not exceed VIN by more than 0.3 Vmin 0 · max 18 V6
Adjustable output voltage VOUTmin 1 · max 24 V6
Output current IOUTmin 0 · max 3 A6
Junction-to-ambient thermal resistance RθJADDA (HSOIC), 8 PINS; 4-layer JEDEC board, comparison onlytyp 42.9 °C/W7
Junction-to-case (top) thermal resistance RθJC(top)DDA (HSOIC), 8 PINStyp 54 °C/W7
Junction-to-board thermal resistance RθJBDDA (HSOIC), 8 PINStyp 13.6 °C/W7
Junction-to-top characterization parameter ψJTDDA (HSOIC), 8 PINStyp 4.3 °C/W7
Junction-to-board characterization parameter ψJBDDA (HSOIC), 8 PINStyp 13.8 °C/W7
Junction-to-case (bottom) thermal resistance RθJC(bot)DDA (HSOIC), 8 PINStyp 4.3 °C/W7
Minimum operating input voltage VINVIN = 12 V, VEN = 4 V unless otherwise stated; TJ = –40°C to +125°Cmax 3.8 V7
Non-switching input current; measured at VIN pin IQVFB = 1.2 V; open-loop device currenttyp 24 · max 34 uA7
Shutdown quiescent current; measured at VIN pin ISDEN = 0typ 5 · max 10 uA7
EN input level required to turn on internal LDO VEN-VCC-HRising thresholdmax 1 V7
EN input level required to turn off internal LDO VEN-VCC-LFalling thresholdmin 0.3 V7
EN input level required to start switching VEN-HRising thresholdmin 1.2 · typ 1.231 · max 1.26 V7
Hysteresis below VEN-H VEN-HYSHysteresis below VEN-H; fallingtyp 100 mV7
Enable input leakage current ILKG-ENVEN = 3.3 Vtyp 0.2 nA7
Internal LDO output voltage appearing at the VCC pin VCC6 V ≤ VIN ≤ 36 Vmin 4.75 · typ 5 · max 5.25 V7
Bootstrap voltage undervoltage lock-out threshold VBOOT-UVLOtyp 2.2 V7
Feedback voltage; ADJ option VFBADJ optionmin 0.985 · typ 1 · max 1.015 V7
Current into FB pin; ADJ option IFBFB = 1 V; ADJ optiontyp 0.2 · max 50 nA7
High-side current limit ISCLMR33630; open-loop production testmin 3.85 · typ 4.5 · max 5.05 A7
Low-side current limit ILIMITLMR33630; open-loop production testmin 2.9 · typ 3.5 · max 4.1 A7
Minimum peak inductor current IPEAK-MINLMR33630typ 0.69 A8
Zero current detector threshold IZCtyp -0.106 A8
Internal soft-start time tSSmin 2.9 · typ 4 · max 6 ms8
Power-good upper threshold - rising VPG-HIGH-UP% of FB voltagemin 105 · typ 107 · max 110 %8
Power-good upper threshold - falling VPG-HIGH-DN% of FB voltagemin 103 · typ 105 · max 108 %8
Power-good lower threshold - rising VPG-LOW-UP% of FB voltagemin 92 · typ 94 · max 97 %8
Power-good lower threshold - falling VPG-LOW-DN% of FB voltagemin 90 · typ 92 · max 95 %8
Power-good glitch filter delay tPGmin 60 · max 170 us8
Power-good flag RDSON RPGVIN = 12 V, VEN = 4 Vtyp 76 · max 150 Ω8
Power-good flag RDSON RPGVEN = 0 Vtyp 35 · max 60 Ω8
Minimum input voltage for proper PG function VIN-PG50-uA, EN = 0 Vmax 2 V8
PG logic low output VPG50-uA, EN = 0 V, VIN = 2Vmax 0.2 V8
Switching frequency ƒSW"A" Versionmin 340 · typ 400 · max 460 kHz8
High-side MOSFET ON-resistance RDS-ON-HSDDA packagetyp 95 · max 160 mΩ8
Low-side MOSFET ON-resistance RDS-ON-LSDDA packagetyp 66 · max 110 mΩ8
Minimum switch on-time tON-MINDDA package; VIN = 12 V, VEN = 4 V; typical field contains NOMtyp 75 · max 108 ns8
Minimum switch off-time tOFF-MINDDA package; VIN = 12 V, VEN = 4 V; typical field contains NOMtyp 50 · max 85 ns8
Maximum switch on-time tON-MAXVIN = 12 V, VEN = 4 V; typical field contains NOMtyp 7 · max 9 us8
Operating input voltage range VINVOUT = 3.3 V, IOUT= 0 Amin 3.8 · max 36 V9
Output voltage regulation for VOUT = 5 V VOUTVOUT = 5 V, VIN = 7 V to 36 V, IOUT = 0 A to max. loadmin -1.5 · max 2.5 %9
Output voltage regulation for VOUT = 5 V VOUTVOUT = 5 V, VIN = 7 V to 36 V, IOUT = 1 A to max. loadmin -1.5 · max 1.5 %9
Output voltage regulation for VOUT = 3.3 V VOUTVOUT = 3.3 V, VIN = 3.8 V to 36 V, IOUT = 0 A to max. loadmin -1.5 · max 2.5 %9
Output voltage regulation for VOUT = 3.3 V VOUTVOUT = 3.3 V, VIN = 3.8 V to 36 V, IOUT = 1 A to max. loadmin -1.5 · max 1.5 %9
Input supply current when in regulation ISUPPLYVIN = 12 V, VOUT = 3.3 V, IOUT = 0 A, RFBT = 1 MΩtyp 25 uA9
Dropout voltage; (VIN – VOUT) VDROPVOUT = 5 V, IOUT = 1A; dropout at –1% of regulation; ƒSW = 140 kHztyp 150 mV9
Maximum switch duty cycle DMAXVIN = VOUT = 12 V, IOUT = 1 Atyp 98 %9
FB pin voltage required to trip short-circuit hiccup mode VHCtyp 0.4 V9
Time between current-limit hiccup burst tHCtyp 94 ms9
Switch voltage dead time tDtyp 2 ns9
Thermal shutdown temperature TSDShutdown temperaturetyp 165 °C9
Thermal shutdown temperature TSDRecovery temperaturetyp 148 °C9

Pins, by the datasheet

9
1 PGND
Power ground; connect to system ground and AGND, and to bypass capacitor with short wide traces. · p. 5
2 VIN
Regulator input supply; connect high-quality bypass capacitors directly to VIN and PGND. · p. 5
3 EN
Enable input; high turns on, low turns off; may connect directly to VIN; do not float. · p. 5
4 PG
Power-good flag; pull up through a current limiting resistor; high means power OK; pulls low when EN is low; may be left open if unused. · p. 5
5 FB
Feedback input; connect to feedback divider tap; do not float or ground. · p. 5
6 VCC
Internal 5-V LDO output for internal circuits; no external loads; may supply the power-good flag; connect a high-quality 1-uF capacitor to GND. · p. 5
7 BOOT
Bootstrap supply for internal high-side driver; connect a high-quality 100-nF capacitor to SW. · p. 5
8 SW
Regulator switch node; connect to power inductor. · p. 5
THERMAL PAD AGND
Analog ground and thermal connection; solder to a system ground plane for electrical and thermal performance. · p. 5

Open-source boards using it

41See all 41
  • 10 layers224.5 × 160 mmHaasoscope pro adc fpga board, the printed circuit board in 3D

    Haasoscope pro adc fpga board

    drandyhaas/HaasoscopePro

    Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope

    586 parts485MIT
  • 2 layers116 × 74 mmC64-psu, the printed circuit board in 3D

    C64-psu

    jamarju/c64-psu

    Efficient Commodore 64 power supply with overvoltage + overcurrent protection

    50 parts53
  • 2 layers175 × 115 mmLaser Controllerv2 only for pcb test, the printed circuit board in 3D

    Laser Controllerv2 only for pcb test

    Andre1Becker/GalvOS

    Open-source ESP32-S3 laser show controller — built to replace proprietary OEM controllers in RGB galvo laser projectors

    122 parts11GPL-3.0
  • 4 layers120.2 × 224.7 mmPipcb, the printed circuit board in 3D

    Pipcb

    Coen-Lab/exp-control-board

    Hardware and firmware for an experimental control board for scientific rigs

    272 parts3AGPL-3.0
  • 4 layers102.8 × 67 mmEntegre fc, the printed circuit board in 3D

    Entegre fc

    ErdemA33/stm32f405-flight-controller

    Open-source ArduPilot-compatible flight controller for fixed-wing UAVs. STM32F405, 4-layer KiCad design, built in 5 modular stages.

    129 parts3
  • 2 layers59.1 × 75.7 mmPS MotorControllerInterfacePCB, the printed circuit board in 3D

    PS MotorControllerInterfacePCB

    lhr-solar/PS-MotorControllerInterfacePCB

    Provides power conversion/protection and fan control for the Prohelion WaveSculptor 22 motor controller

    127 parts3
  • 6 layers46.5 × 47.2 mmNAVCORE SoOP, the printed circuit board in 3D

    NAVCORE SoOP

    kfilipekk/iridium_drone

    STM32H743 flight controller that navigates without GPS from Iridium satellite Doppler

    217 parts2MIT
  • 4 layers40.5 × 37 mm4 LAYER POWER SUPPLY copy, the printed circuit board in 3D

    4 LAYER POWER SUPPLY copy

    KareemOye/USB_POWER_SUPPLY_PCB

    12 V to 5 V USB step-down supply based on the LM2596-ADJ, designed in KiCad

    30 parts1

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the LMR33630ADDA?

Yes. The symbol is Regulator_Switching:LMR33630ADDA and the footprint Package_SO:Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LMR33630ADDA?

ESOP-8, with 9 pins. Its footprint is drawn on this page.

Where is the LMR33630ADDA datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the LMR33630ADDA?

JLCPCB lists it as part C841384, with 28,851 in stock; the sellers' links on this page open their listings.

What can replace the LMR33630ADDA?

Parts like it in the library: the TPS56528DDAR by Texas Instruments, the LMR33630BDDAR by Texas Instruments, the LMR33640DDDA by Texas Instruments and the LMR33630BDDA by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LMR33630ADDA?

41 boards in 34 repositories on GitHub; the most starred are listed on this page, with their KiCad files.