2 layers38.1 × 22.9 mm
Adafruit adafruit ft232h breakout pcb adafruit ft232h original
oomlout/oomlout_oomp_project_bot_v_2
34 parts
10 layers224.5 × 160 mm
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro485Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
- Size
- 224.5 × 160 mm
- Copper layers
- 10
- Thickness
- 1.6 mm
- Parts
- 586
- Nets
- 477
- Pads
- 2,529
- Tracks, vias
- 6,239, 1,360
- Pours
- 36
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Jul 2024
- Updated
- 4 Oct 2026
Overview
Haasoscope pro adc fpga board is an open-source printed circuit board by drandyhaas, from the drandyhaas/HaasoscopePro repository on GitHub, published under the MIT licence. It is a 10-layer board of 224.5 × 160 mm with 586 parts on 477 nets, routed with 6,239 tracks and 1,360 vias.
It is built around the EPCQ16ASI8N, LMH5401IRMST and LMH6401IRMZR, with the ADC12DL2500ACF, ADF4350BCPZ and LMR33630ADDA among its other parts. Its parts include 241 resistors, 220 capacitors, 27 ICs, 26 connectors and 19 diodes. It belongs with the sensors and measurement and fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
12
EPCQ16ASI8N
SOIC-8SOIC-8 Memory - Configuration Proms for FPGAs ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
LMH5401IRMST
QFN-14(2.5x2.5)-40℃~+85℃ -80dB 1 1.25nV/√Hz 150uA 17500V/us 1ns 1uA 3.15V~5.25V 5.25V 500uV 50mA 55mA 72dB 8GHz Differential Enable/shutdown function、Single-ended to differential conversion、Integrated ADC driver、Adjustable output common-mode voltage Rail-to-rail output QFN-14(2.5x2.5) Differential Amplifiers ROHSTexas InstrumentsDifferential Amplifiers
LMH6401IRMZR
UQFN-16(3x3)-40℃~+85℃ 1 18200V/us 26dB 4.5GHz 45dB 4V~5.25V 69mA 69mA Differential Digital interface gain、Enable/shutdown function、Fully differential、Programmable reference voltage、Power-on reset / default gain VGA UQFN-16(3x3) Programmable / Variable Gain Amplifiers (PGA/VGA) ROHSTexas InstrumentsProgrammable / Variable Gain Amplifiers (PGA/VGA)
ADC12DL2500ACF
BGA-256_17x17mm1.5 GSPS Dual-Channel or 1, 3, 5GSPS Single-Channel,12-Bit Analog-to-Digital Converters (ADC) With LVDS InterfaceTexas InstrumentsUncategorised
ADF4350BCPZ
LFCSP-32(5x5)-40℃~+85℃ 3V~3.6V 4.4GHz External Three-Wire Interface LFCSP-32(5x5) Clock Generators, PLLs, Frequency Synthesizers ROHSAnalog DevicesClock Generators, PLLs, Frequency Synthesizers
LMR33630ADDA
ESOP-8-40℃~+125℃@(TJ) 1 1V~24V 24uA 3.8V~36V 3A 400kHz Adjustable Buck Buck Built-in Yes ESOP-8 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
OPA859IDSGR
WSON-8-EP(2x2)-40℃~+125℃ 0.5pA 1 1.15V/ns 105mA 20.5mA 2uV/℃ 3.3V~5.25V 3.3nV/√Hz@1MHz 5pA 84dB 900MHz 900uV Enable/shutdown function、ESD protection WSON-8-EP(2x2) Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
93LC56B
SOT-23-6SOT-23-6 New Arrivals ROHSMicrochip TechnologyUncategorised
FT232HQ
QFN48Single Channel High Speed USB To Multipurpose UART/FIFO ICFTDIUncategorised
S8050
SOT-23-55℃~+150℃ 1 NPN 100MHz 100nA 120 25V 300mW 500mA 5V 600mV NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
NFM31PC276B0J3L
SMD-4P,3.2x1.6mm-40℃~+85℃ 27uF 5mΩ 6.3V 6A ±20% SMD-4P,3.2x1.6mm Feed Through Capacitors ROHSMurataFeed Through Capacitors
SKQGADE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1.5mm 100,000 cycles 12V 2.6N 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile Switches
README
README.mdHaasoscope Pro
An affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB oscilloscope
Links
Available on CrowdSupply and Mouser and eBay
Video tutorials
See this YouTube Playlist !
Software and firmware versions
- "main" branch currently has v32 firmware and software
- "v32_test" branch: new development is happening here
- old: "v29" branch has v29 firmware and adds more software features
- old: "v27" branch has v27 firmware that shipped with the first round of units
To use a different branch, do git pull && git checkout "branchname".
For v30+ you can download a release zip file for your platform (Windows, Mac, Linux).
Then run the new software, update the firmware (if needed) on your board from that new software, and power cycle the board (automatic firmware reload for boards with v29+ firmware).
Quick start for Windows / Mac (M1+) / Linux (Ubuntu)
- Download a release zip file for your OS
- Install FTDI D2xx driver for your OS:
- for Windows: run the setup exe at
ftdi_setup.exe - for Mac:
sudo mkdir -p /usr/local/lib; sudo cp libftd2xx.dylib /usr/local/lib/ - for Linux:
sudo cp libftd2xx.so /usr/lib/
- Plug Haasoscope Pro into your computer via USB (5V 2A at least!)
- Run HaasoscopeProQt in the
(OS)_HaasoscopeProQtdirectory
Fuller way of running
- Install python3 and git for your operating system
- Get code:
git clone https://github.com/drandyhaas/HaasoscopePro.git cd HaasoscopePro/software- Install dependencies:
pip install -r requirements.txt
or manually:pip install numpy scipy pyqtgraph PyQt5 pyftdi ftd2xx requests packaging - Install FTDI driver (see Quick start above)
- Plug Haasoscope Pro into your computer via USB (5V 2A at least!)
- Run:
python3 HaasoscopeProQt.py
Tips
- If not enough power is being supplied, plug in via a powered USB hub, a USB PD hub with 15W reserved for ports, or use an external 5-24V 20W+ power adapter with 2.1mm plug
- If you get security issues on Mac, do:
xattr -cr Mac_HaasoscopeProQt - If the board is not found on Linux, use this udev rule and then plug it in:
sudo cp ft245.rules /etc/udev/rules.d/ - If you get an error like "qt.qpa.plugin: Could not load the Qt platform plugin "xcb" in "" even though it was found", try:
sudo apt install libxcb-xinerama0
Support
- Ask a question in the discussions forum
- Post bugs or requests in the issues section
Repository structure
- adc board: Design files and documentation for the main board, based on Eagle 9.6.2
- adc board firmware: Quartus lite project and documentation for the Altera Cyclone IV FPGA firmware
- case: Front and back PCB panels for the aluminum case
- other: Other files like safety docs, jlc files, and ftdi template
- software: Python files and documentation for the oscilloscope program
- sub boards: Eagle design files and documentation for smaller test boards that were used during development
2 GHz Active Probe
All designs for the accompanying Haasoscope Pro-be active probe are in a separate repository
Other GUIs
- ngscopeclient is a very powerful multi-instrument analysis suite. HaasoscopeProQt must be running, which then automatically opens the LAN port and accepts connections from ngscopeclient. See the ngscopeclient user manual for details.
Parts
586| Qty | Value | Footprint | References |
|---|---|---|---|
| 76 | 0.1uF | haasoscope_pro_adc_fpga_board:RESC0402_N_169009 | C12, C17, C19, C20, C23, C114, C115, C116, C117, C119, C121, C122, C123, C124, C125, C245 +60 |
| 64 | 100 | haasoscope_pro_adc_fpga_board:0201 | R1, R100, R101, R102, R103, R104, R105, R106, R107, R108, R109, R110, R111, R112, R113, R114 +48 |
| 46 | 0.1uF | haasoscope_pro_adc_fpga_board:C0402 | C107, C108, C109, C110, C111, C112, C113, C129, C130, C131, C132, C133, C134, C135, C142, C143 +30 |
| 40 | 10uF | haasoscope_pro_adc_fpga_board:RESC0805_N_169009 | C10, C13, C16, C18, C21, C24, C118, C120, C126, C242, C243, C244, C246, C248, C251, C253 +24 |
| 36 | 1k | haasoscope_pro_adc_fpga_board:RES-0402 | R10, R11, R12, R13, R14, R16, R22, R28, R29, R30, R32, R157, R179, R206, R236, R238 +20 |
| 28 | 22uF | haasoscope_pro_adc_fpga_board:RESC0805_N_169009 | C290, C291, C292, C293, C294, C295, C296, C297, C298, C299, C300, C301, C302, C303, C304, C305 +12 |
| 27 | 10k | haasoscope_pro_adc_fpga_board:RES-0402 | R27, R38, R121, R123, R151, R161, R212, R213, R214, R215, R216, R219, R220, R234, R237, R239 +11 |
| 19 | 1k | haasoscope_pro_adc_fpga_board:R0402 | R140, R141, R143, R144, R145, R146, R147, R162, R164, R171, R172, R178, R180, R181, R197, R199 +3 |
| 19 | 2p-2.54 | haasoscope_pro_adc_fpga_board:H2-2.54_478 | J1, J3, J4, J30, J31, J32, J33, J34, J35, J36, J37, J39, J40, J41, J42, J43 +3 |
| 18 | red | haasoscope_pro_adc_fpga_board:CHIP-LED0603 | LED1, LED2, LED3, LED25, LED26, LED27, LED28, LED29, LED30, LED32, LED41, LED42, LED43, LED44, LED45, LED46 +2 |
| 14 | 100k | haasoscope_pro_adc_fpga_board:RES-0402 | R137, R163, R209, R221, R223, R224, R225, R226, R227, R229, R230, R231, R232, R233 |
| 12 | 1uF | haasoscope_pro_adc_fpga_board:RESC0402_N_169009 | C11, C14, C22, C30, C32, C261, C265, C269, C273, C277, C281, C285 |
| 8 | 39 | haasoscope_pro_adc_fpga_board:R0402 | R44, R45, R138, R139, R187, R188, R194, R195 |
| 8 | 47 | haasoscope_pro_adc_fpga_board:R0402 | R43, R153, R154, R159, R168, R169, R170, R177 |
| 7 | 0 | haasoscope_pro_adc_fpga_board:RES-0402 | R15, R18, R81, R87, R88, R89, R90 |
| 7 | 10uH | haasoscope_pro_adc_fpga_board:CDRH125 | L1, L9, L10, L11, L12, L13, L14 |
| 7 | LMR33630ADDA | haasoscope_pro_adc_fpga_board:SOIC127P600X170-9N | PS2, PS9, PS10, PS11, PS12, PS13, PS14 |
| 7 | TPS7A7200RGTR | haasoscope_pro_adc_fpga_board:QFN50P300X300X100-17N | IC7, IC22, IC23, IC24, IC26, IC27, IC28 |
| 6 | 5.1k | haasoscope_pro_adc_fpga_board:RES-0402 | R152, R182, R183, R217, R218, R235 |
| 6 | S8050 | haasoscope_pro_adc_fpga_board:SOT-23_477 | Q1, Q4, Q5, Q7, Q8, Q9 |
| 5 | 10k | haasoscope_pro_adc_fpga_board:0402_RES | R125, R127, R130, R186, R198 |
| 5 | 1k | haasoscope_pro_adc_fpga_board:0402_RES | R122, R124, R126, R202, R203 |
| 5 | 47 | haasoscope_pro_adc_fpga_board:RES-0402 | R31, R136, R160, R210, R211 |
| 5 | G6K-2F-RF-T-TR03_DC5 | haasoscope_pro_adc_fpga_board:G6K2FRFTTR03DC5 | K1, K2, K3, K4, K5 |
| 5 | NFM31PC276B0J3L | haasoscope_pro_adc_fpga_board:NFM31HK103R1H3L | C5, C15, C25, C35, C45 |
| 4 | @HOLE0, @HOLE1, @HOLE2, @HOLE3 | ||
| 4 | 10k | haasoscope_pro_adc_fpga_board:R0402 | R156, R173, R174, R175 |
| 4 | 120 | haasoscope_pro_adc_fpga_board:R0402 | R150, R167, R240, R241 |
| 4 | 127 | haasoscope_pro_adc_fpga_board:R0402 | R131, R132, R189, R190 |
| 4 | 75 | haasoscope_pro_adc_fpga_board:R0402 | R148, R149, R165, R166 |
| 4 | 8pin | haasoscope_pro_adc_fpga_board:1X08_513 | J8, J10, J11, J13 |
| 4 | OPA859IDSGR | haasoscope_pro_adc_fpga_board:SON50P200X200X80-9N | FL1, FL2, FL3, FL4 |
| 3 | 0 | haasoscope_pro_adc_fpga_board:R0402 | R142, R155, R196 |
| 3 | 357 | haasoscope_pro_adc_fpga_board:R0402 | R135, R185, R193 |
| 3 | 50 | haasoscope_pro_adc_fpga_board:SMA_EDGELAUNCH | EXTTRIGIN0, OUTSPLIT0, UNK1KHZOUT50 |
| 3 | SN74AVC4T774PWR | haasoscope_pro_adc_fpga_board:SOP65P640X120-16N | IC2, IC15, IC30 |
| 3 | TLV9102IPWR | haasoscope_pro_adc_fpga_board:SOP65P640X120-8N | IC4, IC18, IC33 |
| 2 | 0 | haasoscope_pro_adc_fpga_board:0402_RES | R128, R129 |
| 2 | 0.1uF | haasoscope_pro_adc_fpga_board:0402_CAP | C44, C50 |
| 2 | 16pF | haasoscope_pro_adc_fpga_board:RESC0402_N_169009 | C127, C128 |
| 2 | 1M | haasoscope_pro_adc_fpga_board:R0402 | R42, R158 |
| 2 | 1M | haasoscope_pro_adc_fpga_board:RES-0402 | R204, R205 |
| 2 | 22.6 | haasoscope_pro_adc_fpga_board:R0402 | R134, R192 |
| 2 | 47nF | haasoscope_pro_adc_fpga_board:RESC0402_N_169009 | C1, C2 |
| 2 | 66.5 | haasoscope_pro_adc_fpga_board:R0402 | R133, R191 |
| 2 | ?10? | haasoscope_pro_adc_fpga_board:C0805_348 | C57, C79 |
| 2 | BU-SMB-V | haasoscope_pro_adc_fpga_board:BU-SMB-V_133 | CLKEXT0, CLKOUT2 |
| 2 | LMH5401IRMST | haasoscope_pro_adc_fpga_board:LMH5401IRMSR | IC13, IC21 |
| 2 | LMH6401IRMZR | haasoscope_pro_adc_fpga_board:LMH6401IRMZR | IC14, IC29 |
| 2 | MOLEX_BNC_73100-0105 | haasoscope_pro_adc_fpga_board:MOLEX-BNC-73100-0105 | BNCIN1, BNCIN2 |
| 2 | RF_1uF | haasoscope_pro_adc_fpga_board:C0402 | C72, C82 |
| 2 | RJ45-CONNECTOR-SHIELDED | haasoscope_pro_adc_fpga_board:RJ45_THT_RA_AMPH-FRJAE448 | U$1, U$3 |
| 2 | SKQGADE010 | haasoscope_pro_adc_fpga_board:SW4-SMD-5.2X5.2X1.5MM_476 | SW3, SW4 |
| 2 | TLP3475_TP,F | haasoscope_pro_adc_fpga_board:TLP3475TPF | K6, K7 |
| 2 | TPS72325DBVR | haasoscope_pro_adc_fpga_board:SOT95P280X145-5N | IC10, IC25 |
| 2 | test1 | haasoscope_pro_adc_fpga_board:USB-2.0-A-THT-RA-TE_AMP-292303-1 | J2, J15 |
| 1 | 12MHz | haasoscope_pro_adc_fpga_board:CRYSTAL-SMD-5X3 | Y3 |
| 1 | 12Vin | haasoscope_pro_adc_fpga_board:DCJACK_2MM_PTH | CN2 |
| 1 | 2.7nF | haasoscope_pro_adc_fpga_board:C0402 | C155 |
| 1 | 2x5 | haasoscope_pro_adc_fpga_board:2X5-SHROUDED_513 | JTAG0 |
| 1 | 39 | haasoscope_pro_adc_fpga_board:RES-0402 | R184 |
| 1 | 39k | haasoscope_pro_adc_fpga_board:RES-0402 | R222 |
| 1 | 47nF | haasoscope_pro_adc_fpga_board:C0402 | C157 |
| 1 | 5.1k | haasoscope_pro_adc_fpga_board:R0402 | R176 |
| 1 | 50mΩ 220Ω@100MHz 0603 | haasoscope_pro_adc_fpga_board:0603_512 | FB2 |
| 1 | 56k | haasoscope_pro_adc_fpga_board:RES-0402 | R228 |
| 1 | 680pF | haasoscope_pro_adc_fpga_board:C0402 | C156 |
| 1 | 93LC56B | haasoscope_pro_adc_fpga_board:SOT23-6 | IC9 |
| 1 | ADC122S021CIMM_NOPB | haasoscope_pro_adc_fpga_board:SOP65P490X110-8N | IC3 |
| 1 | ADC12DL2500ACF | haasoscope_pro_adc_fpga_board:BGA256C100P16X16_1700X1700X331 | IC1 |
| 1 | ADF4350BCPZ | haasoscope_pro_adc_fpga_board:QFN50P500X500X100-33V2N | U2 |
| 1 | B340A | haasoscope_pro_adc_fpga_board:SMA-DIODE_514 | D10 |
| 1 | DAC8562SDGSR | haasoscope_pro_adc_fpga_board:SOP50P490X110-10N | IC17 |
| 1 | EP4CE30F23C6N | haasoscope_pro_adc_fpga_board:BGA484C100P22X22_2300X2300X240 | IC5 |
| 1 | EPCQ16ASI8N | haasoscope_pro_adc_fpga_board:SOIC127P600X175-8N | IC6 |
| 1 | FDN340P | haasoscope_pro_adc_fpga_board:SOT-23_477 | Q2 |
| 1 | FT232HQ | haasoscope_pro_adc_fpga_board:QFN48_8MM | IC8 |
| 1 | Fan | haasoscope_pro_adc_fpga_board:1X02 | JST_FAN0 |
| 1 | NCP18WF104F03RC | haasoscope_pro_adc_fpga_board:R0603_474 | R207 |
| 1 | OSCILLATORSMD-5X3 | haasoscope_pro_adc_fpga_board:OSCILLATOR-SMD-5X3.2_511 | Y2 |
The 585 most common of 586 parts.
Similar boards
- 2 layers38.5 × 50.3 mm
Projekt AUE
hubjab21/high-speed-analog-front-end-pcb
High-speed analog front-end PCB with LMH5401 differential amplifier driving AD9211 ADC. Includes measurements and validation.
43 parts - 4 layers90 × 74 mm
VERTECS CCB A
ezrafielding/vertecs-ccb
The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core.
203 parts7CERN-OHL-P-2.0 - 2 layers150 × 69 mm
Programming jig r1.0
butterstick-fpga/programming-jig
A FT232H based production programming jig for the ButterStick
50 parts6 - 2 layers257.2 × 89.2 mm
Bully
sporkus/bully2040_keyboard
Opensource PCB for bully keyboard ------------------------------
137 parts10WTFPL - 2 layers76.2 × 123.5 mm
- 4 layers91.3 × 120.5 mm
- 4 layers117.6 × 83 mm
Nile test chip pcb
Ash-tronix/nile_test_chip_pcb
KiCad PCB design files to support the Ashtronix® Nile test chip.
177 parts
Questions
How big is the Haasoscope pro adc fpga board PCB?
It measures 224.5 × 160 mm and has 10 copper layers, 1.6 mm thick.
What parts does the Haasoscope pro adc fpga board use?
586 parts, built around the EPCQ16ASI8N, LMH5401IRMST, LMH6401IRMZR and ADC12DL2500ACF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Haasoscope pro adc fpga board KiCad files?
From the drandyhaas/HaasoscopePro repository on GitHub, at the commit this page was made from: the board is adc board/Kicad/haasoscope_pro_adc_fpga_board.kicad_pcb and its schematic adc board/Kicad/ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Haasoscope pro adc fpga board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).