

Opensource PCB for bully keyboard ------------------------------
- Size
- 257.2 × 89.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 137
- Nets
- 97
- Pads
- 665
- Tracks, vias
- 753, 47
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 23 Jun 2023
- Updated
- 7 Jan 2024
Overview
Bully is an open-source printed circuit board by sporkus, from the sporkus/bully2040_keyboard repository on GitHub, published under the WTFPL licence. It is a 2-layer board of 257.2 × 89.2 mm with 137 parts on 97 nets, routed with 753 tracks and 47 vias.
It is built around the RP2040, W25Q128JVSIQ and 1N4148W, with the SKQGADE010 and SM04B-SRSS-TB(LF)(SN) among its other parts. Its parts include 57 switches, 47 diodes, 19 capacitors, 5 resistors and 3 ICs. It belongs with the RP2040 boards of this library.
Main components
5RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching DiodesSKQGADE010
SMD-4P,5.2x5.2mm-40℃~+90℃ 1.5mm 100,000 cycles 12V 2.6N 5.2mm 5.2mm 50mA Round Button SPST-NO Surface Mount,Vertical SMD-4P,5.2x5.2mm Tactile Switches ROHSALPSALPINETactile SwitchesSM04B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 2.9mm 4 4.32mm 4P 50V 6mm Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
README
readme.mdOpensource PCB for bully keyboard
This is an opensource pcb made for Bully keyboard.
Features
- No big bar
- MX/Alps
- Capslock LED
- EC11 encoder
- RP2040
Supported layouts

Production files
JLCPCB production files are provided. Component positions have been verified, but as always, do your own diligence when ordering.
Firmware
Schematic
Interactive BOM
PCB

Parts
137| Qty | Value | Footprint | References |
|---|---|---|---|
| 45 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +29 |
| 33 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-1U | SW2, SW10, SW11, SW12, SW13, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW27 +17 |
| 10 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C5, C6, C9, C10, C11, C12, C13, C14, C15 |
| 9 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-1.25U | SW37, SW38, SW39, SW40, SW43, SW44, SW45, SW47, SW52 |
| 5 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-1.5U | SW1, SW46, SW48, SW51, SW53 |
| 4 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4, C7, C16, C17 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C18, C19 |
| 2 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R7 |
| 2 | 22pF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 27R | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D46, D47 |
| 2 | SKQGADE010 | Button_Switch_SMD:SW_SPST_SKQG_WithoutStem | SW_BOOT1, SW_RST1 |
| 2 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-2.25U | SW26, SW57 |
| 2 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-3U-ReversedStabilizers | SW41, SW42 |
| 2 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-1.75U | SW14, SW25 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LOGO | LOGO | G*** |
| 1 | RP2040 | Sleep-lib:RP2040-QFN-56 | U3 |
| 1 | RotaryEncoder_Switch | keebio:RotaryEncoder_EC11 | SW54 |
| 1 | SM04B-SRSS-TB(LF)(SN) | random-keyboard-parts:JST-SR-4 | J1 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-2.25U-ReversedStabilizers | SW49 |
| 1 | SW_Push | MX_Alps_Hybrid:MX-Alps-Hybrid-2.75U-ReversedStabilizers | SW50 |
| 1 | SW_Push | MX_Solderable:MX-Solderable-1.25U | SW55 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
| 1 | XC6206PxxxMR-Regulator_Linear | Package_TO_SOT_SMD:SOT-23 | U4 |
Similar boards
- 2 layers190.5 × 76.2 mm

- 2 layers257.2 × 89.2 mm

Bully
sporkus/orthobully_keyboard
Ortholinear PCB for bully keyboard ------------------------------
141 parts6WTFPL - 2 layers200 × 81 mm

Cutiepie2040-uniform stagger hotswap pcb
flamwenco/cutiepie
A funky little 10.5u with dual 1.75u spacebars.
109 parts35GPL-3.0 - 10 layers224.5 × 160 mm

Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
586 parts485MIT - 2 layers76.2 × 123.5 mm

- 4 layers91.3 × 120.5 mm

- 4 layers117.6 × 83 mm

Nile test chip pcb
Ash-tronix/nile_test_chip_pcb
KiCad PCB design files to support the Ashtronix® Nile test chip.
177 parts - 2 layers431.2 × 126.4 mm

Convertible keyboard pcb
TechnikWeber/convertible-keyboard-pcb
Convertible keyboard PCB: full-size ISO-DE & ANSI with a snap-off numpad that turns it into a TKL (RP2040, USB-C, KiCad). Cheap, clean, modern core to build on — looking for a case designer.
504 parts
Questions
How big is the Bully PCB?
It measures 257.2 × 89.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bully use?
137 parts, built around the RP2040, W25Q128JVSIQ, 1N4148W and SKQGADE010. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bully KiCad files?
From the sporkus/bully2040_keyboard repository on GitHub, at the commit this page was made from: the board is kicad/pcb/bully.kicad_pcb and its schematic kicad/pcb/bully.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bully design in my own project?
Its repository publishes it under the WTFPL licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).