
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
FTDI
Single Channel High Speed USB To Multipurpose UART/FIFO IC
The FT232HQ is an uncategorised made by FTDI in a QFN48 package with 49 pins. Single Channel High Speed USB To Multipurpose UART/FIFO IC.
PCBKit's library has its KiCad symbol (Analog & Interface:FT232HQ, from CERN's library) and its footprint (ICs And Semiconductors SMD:QFN50P800X800X90-49N-S625, from CERN's library), ready for a KiCad board. 4 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | OSCI | Input |
| 2 | OSCO | Output |
| 3 | VPHY | Power in |
| 4 | AGND | Power in |
| 5 | REF | Input |
| 6 | DM | Input |
| 7 | DP | Input |
| 8 | VPLL | Power in |
| 9 | AGND | Power in |
| 10 | GND | Power in |
| 11 | GND | Power in |
| 12 | VCCIO | Power in |
| 13 | ADBUS0 | Input/output |
| 14 | ADBUS1 | Input/output |
| 15 | ADBUS2 | Input/output |
| 16 | ADBUS3 | Input/output |
| 17 | ADBUS4 | Input/output |
| 18 | ADBUS5 | Input/output |
| 19 | ADBUS6 | Input/output |
| 20 | ADBUS7 | Input/output |
| 21 | ACBUS0 | Input/output |
| 22 | GND | Power in |
| 23 | GND | Power in |
| 24 | VCCIO | Power in |
| 25 | ACBUS1 | Input/output |
| 26 | ACBUS2 | Input/output |
| 27 | ACBUS3 | Input/output |
| 28 | ACBUS4 | Input/output |
| 29 | ACBUS5 | Input/output |
| 30 | ACBUS6 | Input/output |
| 31 | ACBUS7 | Input/output |
| 32 | ACBUS8 | Input/output |
| 33 | ACBUS9 | Input/output |
| 34 | RESET# | Input |
| 35 | GND | Power in |
| 36 | GND | Power in |
| 37 | VCCA | Power in |
| 38 | VCCCORE | Power in |
| 39 | VCCD | Power in |
| 40 | VREGIN | Power in |
| 41 | AGND | Power in |
| 42 | TEST | Input |
| 43 | EEDATA | Input/output |
| 44 | EECLK | Output |
| 45 | EECS | Input/output |
| 46 | VCCIO | Power in |
| 47 | GND | Power in |
| 48 | GND | Power in |
| 49 | GND | Power in |

drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope

ezrafielding/vertecs-ccb
The VERTECS CCB, is an open-source payload interface board leveraging Commercial Off-The-Shelf (COTS) components with a Raspberry Pi Compute Module 4 at its core.

butterstick-fpga/programming-jig
A FT232H based production programming jig for the ButterStick

oomlout/oomlout_oomp_project_bot_v_2
Yes. The symbol is Analog & Interface:FT232HQ and the footprint ICs And Semiconductors SMD:QFN50P800X800X90-49N-S625, both drawn on this page. PCBKit places them on a board for you when you design with it.
QFN48, with 49 pins. Its footprint is drawn on this page.
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.