LIS2HH12

STMicroelectronicsExtended

-40℃~+85℃ 1.71V~3.6V 16bit 5uA Accelerometer SPI、I2C X,Y,Z ±8g LGA-12(2x2) Accelerometers ROHS

Part id: st/LIS2HH12
Category: Accelerometers
Package: LGA-12(2x2)
Pins: 12
In stock: 11,495 at JLCPCB (C221446)
Used on: 21 open-source boards

Overview

The LIS2HH12 is an accelerometer made by STMicroelectronics in a LGA-12(2x2) package with 12 pins. -40℃~+85℃ 1.71V~3.6V 16bit 5uA Accelerometer SPI、I2C X,Y,Z ±8g LGA-12(2x2) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (Sensor_Motion:LIS2HH12, from KiCad's library) and its footprint (4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 11,495 are in stock at JLCPCB (part C221446). 21 open-source boards in 18 repositories on GitHub use it.

Symbol

Sensor_Motion:LIS2HH12From KiCad's library

Footprint

4ms_Package_QFP:LGA-12_2x2mm_P0.5mmFrom KiCad's library

From the datasheet

Supply, least: 1.71 V · Vdd, recommended operating min · p. 11
Supply, most: 3.6 V · Vdd, recommended operating max · p. 11
Supply, absolute maximum: 4.8 V · Vdd, absolute max · p. 14
Works from: -40 °C · Operating temperature min · p. 11
Works up to: 85 °C · Operating temperature max · p. 11
Takes working: 180 µA · Vdd, active mode typical at ODR 100-800 Hz · p. 11
Takes asleep: 5 µA · Vdd, power-down mode typical · p. 11

What it is and has

Full-scale ranges: ±2g/±4g/±8g · p. 1
Digital interfaces: I2C/SPI · p. 1
Data output: 16-bit · p. 1
Temperature sensor: Embedded · p. 1
Self-test: Embedded · p. 1
FIFO: Embedded · p. 1
Shock survivability: 10000 g · p. 1
Compliance: ECOPACK®, RoHS and Green · p. 1
Package: LGA-12 (2.0x2.0x1.0 mm) · p. 1
Output data rate: 10 Hz to 800 Hz · p. 1

Around it

res Not specified: between SCL and Vdd_IO; External pull-up required for I2C. · p. 23

Specifications

Parameter	Conditions	As printed	Page
Measurement range FS		typ 2 g	10
Measurement range FS		typ 4 g	10
Measurement range FS		typ 8 g	10
Sensitivity So	@ FS ±2.0 g	typ 0.061 mg/digit	10
Sensitivity So	@ FS ±4.0 g	typ 0.122 mg/digit	10
Sensitivity So	@ FS ±8.0 g	typ 0.244 mg/digit	10
Sensitivity change vs. temperature TCSo		typ 0.01 %/°C	10
Typical zero-g level offset accuracy TyOff	±30 mg	typ 30 mg	10
Zero-g level change vs. temperature TCOff	Delta from 25 °C; ±0.25 mg/°C	typ 0.25 mg/°C	10
Turn-on time Ton	Number of samples to be discarded from power-down to active mode; CTRL4 (23h) (BW_SCALE_ODR) = 0	min 1 # of samples	10
Self-test positive difference ST		min 70 · max 1500 mg	10
Operating temperature range Top		min -40 · max 85 °C	10
Supply voltage Vdd		min 1.71 · typ 2.5 · max 3.6 V	11
I/O pins supply voltage Vdd_IO	Maximum: Vdd+0.1 V	min 1.71 V	11
Current consumption in active mode IddA	ODR 100-800 Hz	typ 180 uA	11
Current consumption in active mode IddA	ODR 50 Hz	typ 110 uA	11
Current consumption in active mode IddA	ODR 10 Hz	typ 50 uA	11
Current consumption in power-down mode IddPdn		typ 5 uA	11
Boot time Tboot	From Vdd on until all configuration and calibration parameters are loaded into device registers	max 20 ms	11
Operating temperature range Top		min -40 · max 85 °C	11
Temperature sensor output change vs. temperature TSDr	Vdd = 2.5 V, T = 25 °C unless otherwise noted; 11-bit resolution	typ 8 digit/°C	11
Temperature refresh rate TODR	Vdd = 2.5 V, T = 25 °C unless otherwise noted	typ 10 Hz	11
Supply voltage Vdd		min -0.3 · max 4.8 V	14
I/O pins supply voltage Vdd_IO		min -0.3 · max 4.8 V	14
Input voltage on any control pin Vin	CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0; maximum: Vdd_IO +0.3 V	min -0.3 V	14
Acceleration (any axis, powered, Vdd = 2.5 V) APOW	0.5 ms	max 3000 g	14
Acceleration (any axis, powered, Vdd = 2.5 V) APOW	0.2 ms	max 10000 g	14
Acceleration (any axis, unpowered) AUNP	0.5 ms	max 3000 g	14
Acceleration (any axis, unpowered) AUNP	0.2 ms	max 10000 g	14
Operating temperature range TOP		min -40 · max 85 °C	14
Storage temperature range TSTG		min -40 · max 125 °C	14
Electrostatic discharge protection ESD	HBM	max 2 kV	14

Pins, by the datasheet

1 SCL/SPC: I2C serial clock or SPI serial port clock. · p. 8
2 CS: SPI enable and I2C/SPI mode selection: high enables I2C and SPI idle mode; low enables SPI and disables I2C. · p. 9
3 SDO/SA0: SPI serial data output or I2C device address selection input. · p. 8
4 SDA/SDI/SDO: I2C serial data, SPI serial data input, or 3-wire serial data output. · p. 8
5 RES: Connect to GND. · p. 9
6 GND: 0 V supply. · p. 9
7 GND: 0 V supply. · p. 9
8 GND: 0 V supply. · p. 9
9 Vdd: Power supply. · p. 9
10 Vdd_IO: Power supply for I/O pins. · p. 9
11 INT2: Interrupt pin 2. · p. 9
12 INT1: Interrupt pin 1. · p. 9

Ordering codes, by the datasheet

LIS2HH12: LGA-12 · Tray; -40 to +85 °C · p. 1
LIS2HH12TR: LGA-12 · Tape and reel; -40 to +85 °C · p. 1

Parameters

Acceleration Measurement Range (MAX): ±8g
Accelerometer Sensing Axis: X,Y,Z
Current - Supply: 180uA
Features: Motion event detection
Interface: SPI
Operating Temperature: -40℃~+85℃
Output Bits: 16bit
Sensor Type: Accelerometer
Standby Current: 5uA
Voltage - Supply: 1.71V~3.6V
Voltage - Supply(Absolute Max): 4.8V

Order codes

LIS2HH12TRLCSC C221446

Pinout

The pins of the LIS2HH12
Pin	Name	Type
1	SCL/SPC	Input
2	CS	Input
3	SA0/SDO	Input/output
4	SDA/SDI	Input/output
5	RES	Passive
6	GND	Power in
7	GND	Passive
8	GND	Passive
9	Vdd	Power in
10	Vdd_IO	Power in
11	INT2	Output
12	INT1	Output

Show this part on your page

<iframe src="https://pcbkit.io/embed/parts/st/LIS2HH12" title="LIS2HH12 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

For any web page: the part itself, turned and zoomed by the reader.

Open-source boards using it

21See all 21

8 layers120 × 60 mm
DFTBoard
juliancoy/zynqPCB
An 8-layer board in Kicad built upon Xilinx Zynq Chip. Includes sound output, HDMI, DDR3, and Arduino Uno style header for screen connection
299 parts75MIT
4 layers117.5 × 30 mm
4reel ee
o7-machinehum/4reel
Stereo machine vision camera for outdoor mobile robotics.
179 parts34MIT
4 layers77.8 × 56.2 mm
Mini ble
mooltipass/minible_hw
Repository for the Mini BLE Hardware
176 parts23MIT
2 layers35 × 99.5 mm
Povslinger
Jeija/esp8266-povslinger
Persistence of vision display using ESP8266 and APA102-2020
49 parts10
2 layers16.8 × 0.3 mm
Nrf peripheral pcb
torjeikenes/nrf_pig_performance
An activity tracker for pigs consisting of a BLE earchip for each pig, and a sentral that gathers data from each pig over BLE and sends it to the backend over NB-IoT.
23 parts1
2 layers62 × 83 mm
Vehicle Power Switch
custom-ds/Vehicle-Auto-On
With the Arduion programmer board loaded with the jtag2updi software, and the Pin 6 from the Arduino connected to the Reset line on the ATTiny404, you can Build and Program directly inside of the Visual Studio Code.
49 partsGPL-3.0
4 layers
Pomodoro V1
MaxLell/Pomodoro_Clock
So this is basically what this device (will) is about. It will sit on my desk and ping me, when I need to take a break, and not only ping me, but rather shine a bright light at me, so that I actually get my lazy a up…
155 partsMIT
4 layers17.5 × 50 mm
UsbMeter
TheBadZhang/usbMeter
Type-A USB 双向电流电压表
76 parts

Parts like it

Questions

Is there a KiCad symbol and footprint for the LIS2HH12?

Yes. The symbol is Sensor_Motion:LIS2HH12 and the footprint 4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LIS2HH12?

LGA-12(2x2), with 12 pins. Its footprint is drawn on this page.

Where is the LIS2HH12 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LIS2HH12?

JLCPCB lists it as part C221446, with 11,495 in stock; the sellers' links on this page open their listings.

What can replace the LIS2HH12?

Parts like it in the library: the LIS2DW12 by STMicroelectronics, the SC7A20HTR by Hangzhou Silan Microelectronics, the LSM303AGR by STMicroelectronics and the QMA6100P by QST. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LIS2HH12?

21 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

LIS2HH12

Overview

Symbol

Footprint

From the datasheet

What it is and has

Around it

Specifications

Pins, by the datasheet

Ordering codes, by the datasheet

Open-source boards using it

DFTBoard

4reel ee

Mini ble

Povslinger

Nrf peripheral pcb

Vehicle Power Switch

Pomodoro V1

UsbMeter

Parts like it

LIS2DW12

SC7A20HTR

LSM303AGR

QMA6100P

KX134-1211

IIS2DLPC

BMA253

LIS2DH12