4 layers74.8 × 31.2 mm
4 layers77.8 × 56.2 mm
Mini ble
mooltipass/minible_hw23Repository for the Mini BLE Hardware
- Size
- 77.8 × 56.2 mm
- Copper layers
- 4
- Thickness
- 0.8 mm
- Parts
- 176
- Nets
- 189
- Pads
- 709
- Tracks, vias
- 1,737, 257
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jul 2020
- Updated
- 1 Oct 2020
Overview
Mini ble is an open-source printed circuit board by mooltipass, from the mooltipass/minible_hw repository on GitHub, published under the MIT licence. It is a 4-layer board of 77.8 × 56.2 mm with 176 parts on 189 nets, routed with 1,737 tracks and 257 vias.
It is built around the ATSAMD21E15B-AU, TPS61220DCK and MAX40200AUK, with the IP4234CZ6,125(ES), LIS2HH12 and LT1613CS5 among its other parts. Its parts include 72 capacitors, 31 resistors, 23 ICs, 9 transistors and 9 switches. It belongs with the radio and wireless boards and the SAM D and SAM boards of this library.
Main components
10
ATSAMD21E15B-AU
TQFP-32(7x7)-40℃~+85℃ 1.62V~3.6V 10bit 12bit 26 32 Bit 32KB 48MHz 4KB ARM Cortex-M0+ Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
TPS61220DCK
SC-70-6(SOT-363)-40℃~+125℃@(TJ) 1 1.8V~6V 200mA 2MHz 5.5uA 700mV~5.5V Adjustable Boost Boost Built-in Yes SC-70-6(SOT-363) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
MAX40200AUK
SOT23-5Ultra-Tiny Micropower, 1A Ideal Diode with Ultra-Low Voltage DropMaxim Integrated (Analog Devices)Uncategorised
IP4234CZ6,125(ES)
SOT-23-6LSOT-23-6L ESD and Surge Protection (TVS/ESD) ROHSElecSuperUncategorised
LIS2HH12
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 16bit 5uA Accelerometer SPI、I2C X,Y,Z ±8g LGA-12(2x2) Accelerometers ROHSSTMicroelectronicsAccelerometersLT1613CS5
UncategorisedANALOG
NC7SZ08P5X
SC-70-5-40℃~+85℃ 1 1.65V~5.5V 2uA 32mA 32mA 4.5ns@5V,50pF 7SZ Series AND Gate Overvoltage-tolerant input、Local shutdown mode SC-70-5 Logic Gates ROHSonsemiLogic Gates
DMN1019USN
SC-59-55℃~+150℃ 1 N-channel 1.2W 12V 41mΩ@1.2V 50.6nC@8V 800mV 9.3A N-Channel SC-59 MOSFETs ROHSDiodes IncorporatedMOSFETs
SI1013X
SC-89-55℃~+150℃ 1 P-Channel 1.5nC@4.5V 100pF 2.7Ω@1.8V 20V 275mW 35pF 400mA 450mV 65pF P-Channel ±6V SC-89 MOSFETs ROHSVishay IntertechnologyMOSFETs
MBR230S1F
SOD-123F-55℃~+125℃ 1 Independent 1mA@30V 2A 30A 30V 420mV@2A SOD-123F Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdParts
176| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 100nF | Capacitor_SMD:C_0603_1608Metric | C13, C15, C16, C21, C22, C23, C24, C31, C32, C38, C40, C41, C42, C43, C44, C45 +11 |
| 13 | 1uF/25V | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C6, C9, C10, C14, C18, C27, C30, C47, C59, C64 |
| 10 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C28, C29, C33, C34, C35, C36, C37, C65, C66, C72 |
| 9 | 10uF/16V | Capacitor_SMD:C_0805_2012Metric | C5, C7, C11, C39, C54, C55, C56, C57, C58 |
| 8 | SW_SPST | footprints:DIP_1POS_KAE01LAGT | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 8 | TestPoint | footprints:TP_KEYSTONE_500X | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8 |
| 7 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2, R5, R15, R23, R24, R25 |
| 6 | DMN1019USN | Package_TO_SOT_SMD:SC-59 | Q2, Q4, Q5, Q7, Q8, Q9 |
| 4 | 10k | Resistor_SMD:R_0402_1005Metric | R16, R18, R19, R21 |
| 4 | 1M | Resistor_SMD:R_0402_1005Metric | R3, R4, R10, R27 |
| 4 | 5.1k | Resistor_SMD:R_0402_1005Metric | R11, R12, R28, R29 |
| 4 | FER | Resistor_SMD:R_0603_1608Metric | FB2, FB3, FB4, FB5 |
| 4 | FIX_M1.4 | footprints:FIX_M1.4 | J1, J2, J4, J7 |
| 3 | 100 | Resistor_SMD:R_0402_1005Metric | R14, R22, R26 |
| 3 | 10uF/6.3V | Capacitor_SMD:C_0603_1608Metric | C4, C12, C49 |
| 3 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1, L5, L6 |
| 3 | MAX40200 | Package_TO_SOT_SMD:SOT-23-5 | U1, U4, U6 |
| 3 | SI1013X | footprints:SC89 | Q1, Q3, Q6 |
| 3 | Zener 3.3V | Diode_SMD:D_SOD-523 | D1, D2, D3 |
| 2 | 27pF | Capacitor_SMD:C_0402_1005Metric | C70, C71 |
| 2 | 5.6pF | Capacitor_SMD:C_0402_1005Metric | C19, C20 |
| 2 | C | Capacitor_SMD:C_0402_1005Metric | C50, C51 |
| 2 | Conn_02x05_Odd_Even | footprints:SHF-105-01-X-D-TH | J5, J6 |
| 2 | IP4234CZ6,125 | Package_SO:TSOP-6_1.65x3.05mm_P0.95mm | U9, U21 |
| 2 | MIC5504 | Package_TO_SOT_SMD:SOT-23-5 | U2, U22 |
| 2 | USBC_Receptacle | footprints:USB_C_Receptacle_GT-USB-7010 | U11, U20 |
| 1 | 1 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 10pF | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 120R,100Mhz,200mA | Resistor_SMD:R_0603_1608Metric | FB1 |
| 1 | 12K | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 12MHz | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y3 |
| 1 | 17k8 | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 200p | Capacitor_SMD:C_0402_1005Metric | C8 |
| 1 | 20k | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 26Mhz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 32.768Khz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 536k | Resistor_SMD:R_0402_1005Metric | R13 |
| 1 | 54k9 | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 620k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 680nH | footprints:L_0806 | L2 |
| 1 | 9.1nH | Inductor_SMD:L_0603_1608Metric | L4 |
| 1 | AT45DB081E | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | ATBTLC1000 | footprints:QFN-32-1EP_4x4mm_Pitch0.4mm | U8 |
| 1 | ATSAMD21E15B | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U7 |
| 1 | CON_SMARTCARD | footprints:CON_SMARTCARD_CLONE_91-90473-003A | U12 |
| 1 | FT4232H_PAD | Package_DFN_QFN:QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm | U23 |
| 1 | LIS2HH12 | footprints:LGA-12 | U15 |
| 1 | LM3670 | Package_TO_SOT_SMD:SOT-23-5 | U18 |
| 1 | LT1613 | Package_TO_SOT_SMD:TSOT-23-5 | U5 |
| 1 | MBR230S1 | Diode_SMD:D_SOD-123F | D5 |
| 1 | NC7SZ08P5X | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U13 |
| 1 | NiMH | footprints:BAT_TWOTHIRD_AAA | BT1 |
| 1 | OLED_M01084 | footprints:SCREEN_M01084 | U14 |
| 1 | SAMD21G18A-MU | Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U17 |
| 1 | SW_SPST | footprints:SWITCH_PUSH_6X3.5mm | SW9 |
| 1 | TPS61220 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U3 |
| 1 | W25Q16 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U16 |
| 1 | WHEEL_SRBE210200 | footprints:SRBE210200 | U19 |
More from mooltipass/minible_hw
1Similar boards
- 2 layers74.8 × 32.5 mm
- 2 layers98.6 × 49.8 mm
Sch
SL-RU/svelotracker
Device for bicycle. It will show current position, track, speed, compass, direction to the destination or to start. It can save the track and etc
106 parts1 - 4 layers58 × 43 mm
- 2 layers92.9 × 69.7 mm
- 2 layers126.8 × 48.3 mm
Dc25badge
Matir/DC25Badge
This is an unofficial badge I made for DEF CON 25. It's a blinding party-style badge with 48 individually addressable RGB LEDs.
101 parts1Apache-2.0 - 2 layers102 × 24.4 mm
ROFLtemp 1
washed/rofltemp_1-pcb
This is the circuit schematic and board layout project for the ROFLtemp-1 multi-purpose RTD thermometer. # WARNING! DO NOT BUILD WITH THESE DESIGN FILES! Several stupid errors are in this layout that will be corrected…
225 parts - 2 layers45 × 25 mm
- 2 layers25 × 25 mm
SmallEncoder
DDeGonge/OS-ARM
This arm is not industrial and it will not be fast, but that is not my goal. But it will hopefully be a very nice looking arm fully capable of 6dof motion, cheap enough to keep it accessable but capable enough to…
17 parts498MIT
Questions
How big is the Mini ble PCB?
It measures 77.8 × 56.2 mm and has 4 copper layers, 0.8 mm thick.
What parts does the Mini ble use?
176 parts, built around the ATSAMD21E15B-AU, TPS61220DCK, MAX40200AUK and IP4234CZ6,125(ES). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mini ble KiCad files?
From the mooltipass/minible_hw repository on GitHub, at the commit this page was made from: the board is dev_board/mini_ble.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mini ble design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).