Skip to the content
123

DMN1019USN

Diodes IncorporatedExtended

-55℃~+150℃ 1 N-channel 1.2W 12V 41mΩ@1.2V 50.6nC@8V 800mV 9.3A N-Channel SC-59 MOSFETs ROHS

Part id
diodes/DMN1019USN
Category
MOSFETs
Package
SC-59
Pins
3
In stock
9,390 at JLCPCB (C145103)
Used on
5 open-source boards

Overview

The DMN1019USN is a MOSFET made by Diodes Incorporated in a SC-59 package with 3 pins. -55℃~+150℃ 1 N-channel 1.2W 12V 41mΩ@1.2V 50.6nC@8V 800mV 9.3A N-Channel SC-59 MOSFETs ROHS.

PCBKit's library has its KiCad symbol (Pinmap_Generic:Q_NMOS_1G_2S_3D, from PCBKit's generic symbols) and its footprint (Package_TO_SOT_SMD:SC-59, from KiCad's library), ready for a KiCad board. 9,390 are in stock at JLCPCB (part C145103). 5 open-source boards in 4 repositories on GitHub use it.

Symbol

Pinmap_Generic:Q_NMOS_1G_2S_3DFrom PCBKit's generic symbols

Footprint

123
Package_TO_SOT_SMD:SC-59From KiCad's library

From the datasheet

13
Drain-source, most
12 V · drain-source voltage, absolute max · p. 2
Gate-source, most
8 V · gate-source voltage, ±8 V absolute max · p. 2
Drain current, most
9.3 A · continuous steady state, TA = 25°C, VGS = 4.5 V, max; Note 6 PCB · p. 2
Junction, hottest
150 °C · junction temperature, max · p. 2
Gate threshold
530 mV · VDS = VGS, ID = 250 uA, typical · p. 2
On resistance
10 mΩ · VGS = 4.5 V, ID = 9.7 A, max · p. 2
On resistance
12 mΩ · VGS = 2.5 V, ID = 9 A, max · p. 2
On resistance
14 mΩ · VGS = 1.8 V, ID = 8.1 A, max · p. 2
On resistance
18 mΩ · VGS = 1.5 V, ID = 4.5 A, max · p. 2
On resistance
41 mΩ · VGS = 1.2 V, ID = 2.4 A, max · p. 2
Junction to air (SC59)
160 K/W · steady state, minimum recommended pads on single-sided FR-4, Note 5 · p. 2
Junction to air (SC59)
96 K/W · steady state, 1-inch square FR-4 with high coverage 2 oz copper, Note 6 · p. 2
Junction to case (SC59)
18 K/W · junction to case, Note 6 · p. 2

Open-source boards using it

5
  • 4 layers77.8 × 56.2 mmMini ble, the printed circuit board in 3D

    Mini ble

    mooltipass/minible_hw

    Repository for the Mini BLE Hardware

    176 parts23MIT
  • 2 layers126.8 × 48.3 mmDc25badge, the printed circuit board in 3D

    Dc25badge

    Matir/DC25Badge

    This is an unofficial badge I made for DEF CON 25. It's a blinding party-style badge with 48 individually addressable RGB LEDs.

    101 parts1Apache-2.0
  • 2 layers102 × 24.4 mmROFLtemp 1, the printed circuit board in 3D

    ROFLtemp 1

    washed/rofltemp_1-pcb

    This is the circuit schematic and board layout project for the ROFLtemp-1 multi-purpose RTD thermometer. # WARNING! DO NOT BUILD WITH THESE DESIGN FILES! Several stupid errors are in this layout that will be corrected…

    225 parts
  • 4 layers74.8 × 31.2 mmMini ble, the printed circuit board in 3D

    Mini ble

    mooltipass/minible_hw

    Repository for the Mini BLE Hardware

    127 parts23MIT

Parts like it

1

Questions

Is there a KiCad symbol and footprint for the DMN1019USN?

Yes. The symbol is Pinmap_Generic:Q_NMOS_1G_2S_3D and the footprint Package_TO_SOT_SMD:SC-59, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the DMN1019USN?

SC-59, with 3 pins. Its footprint is drawn on this page.

Where is the DMN1019USN datasheet?

Diodes Incorporated publishes it: the Datasheet link on this page opens it.

Where can I order the DMN1019USN?

JLCPCB lists it as part C145103, with 9,390 in stock; the sellers' links on this page open their listings.

What can replace the DMN1019USN?

Parts like it in the library: the DMN3033LSN by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the DMN1019USN?

5 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.