Skip to the content
123456789101112

QMA6100P

QSTExtended

-40℃~+85℃ 1.71V~3.6V 14bit 500nA Accelerometer SPI、I2C X,Y,Z ±32g 运动事件检测 LGA-12(2x2) Accelerometers ROHS

Part id
qst/QMA6100P
Category
Accelerometers
Package
LGA-12_2x2mm
Pins
12
In stock
26,789 at JLCPCB (C2887190)
Used on
2 open-source boards

Overview

The QMA6100P is an accelerometer made by QST in a LGA-12_2x2mm package with 12 pins. -40℃~+85℃ 1.71V~3.6V 14bit 500nA Accelerometer SPI、I2C X,Y,Z ±32g 运动事件检测 LGA-12(2x2) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:QMA6100P_C2887190, from EasyEDA) and its footprint (4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 26,789 are in stock at JLCPCB (part C2887190). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1AD02SDX3VDD4RESV15INT16INT27NC8GNDIO9GND10SENB11RESV212SCX
EasyEDA_Cloud:QMA6100P_C2887190From EasyEDA

Footprint

123456789101112
4ms_Package_QFP:LGA-12_2x2mm_P0.5mmFrom KiCad's library

From the datasheet

7
Supply, least
1.71 V · VDD, recommended operating min · p. 4
Supply, most
3.6 V · VDD, recommended operating max · p. 4
Supply, absolute maximum
5.4 V · VDD, absolute max · p. 4
Works from
-40 °C · Operating temperature min · p. 4
Works up to
85 °C · Operating temperature max · p. 4
Takes working
149 µA · VDD, low noise current typical, ODR=50Hz · p. 4
Takes asleep
500 nA · Standby current typical, VDD and VDDIO on · p. 4

What it is and has

6
Sensor
Three-axis accelerometer · p. 1
ADC
14-bit · p. 1
Digital interfaces
I2C and SPI · p. 1
Package
2x2x0.95 mm3, 12-pin LGA · p. 1
FIFO
64 frames · p. 1
Environmental compliance
RoHS compliant, halogen-free · p. 1

Specifications

35
ParameterConditionsAs printedPage
Supply voltage VDDVDD, for internal blocksmin 1.71 · typ 3.3 · max 3.6 V4
Standby currentVDD and VDDIO ontyp 0.5 uA4
Low power currentODR=800 Hztyp 38 uA4
Low power currentODR=400 Hztyp 19 uA4
Low power currentODR=200 Hztyp 10 uA4
Low power currentODR=80 Hztyp 5 uA4
Low noise currentODR=50Hztyp 149 uA4
Low noise currentODR=25 Hztyp 75 uA4
Low noise currentODR=12.5 Hztyp 38 uA4
Low noise currentODR=6.25 Hztyp 19 uA4
Data output rate (ODR) ODRmin 1.25 · max 1000 Samples/sec4
Startup timeFrom the time when VDD reaches to 90% of final value to the time when device is ready for conversiontyp 2 ms4
Wakeup timeFrom the time device enters into active mode to the time device is ready for conversiontyp 1 ms4
Operating temperaturemin -40 · max 85 ℃4
SensitivityFS=±2gtyp 4096 LSB/g4
SensitivityFS=±4gtyp 2048 LSB/g4
SensitivityFS=±8gtyp 1024 LSB/g4
SensitivityFS=±16gtyp 512 LSB/g4
SensitivityFS=±32gtyp 256 LSB/g4
Noise densityFS=±2g, run statetyp 220 ug/√Hz4
Cross Axis Sensitivitytyp 1 %4
Power Supply Voltage VddmaxTested at 25°C except stated otherwise.min -0.3 · max 5.4 V4
Input Voltage (other than power) VmaxTested at 25°C except stated otherwise.min -0.2 V4
Reflow ClassificaitionMSL3, 260℃ Peak Temperaturemax 260 ℃4
Storage Temperature TstrTested at 25°C except stated otherwise.min -50 · max 150 ℃4
Storage Humidity HstrTested at 25°C except stated otherwise.min 10 · max 95 %RH5
Shock Immunityduration < 200uSmax 10000 g5
Digital Output Low Voltage(I2C) Vol_d1Io=3mA (SDI) *1)min 0 V5
Digital Output Low Voltage (SPI) Vol_d2Io=1mA (SDI, SDO) *1)min 0 V5
Leakage Current at Output OFF IoffSDX, AD0min -10 · max 10 uA5
Internal Pullup Resistor RpullupSENBmin 70 · typ 120 · max 190 kohm5
I2C Load Capacitor CbSDX, SCXmax 400 pF5
Load Capacitance of Reset Terminal Crstmax 20 pF5
Pulse Width of Asynchronous Reset Trstmin 100 usec5
Power on Startup Time Tstartmax 10 msec5

Ordering codes, by the datasheet

1
QMA6100P
LGA-12 · -40℃~85℃; Tape and Reel: 5k pieces/reel · p. 37

Open-source boards using it

2
  • 4 layers65.3 × 38 mmAIS IREC 2026 FC, the printed circuit board in 3D

    AIS IREC 2026 FC

    JackMcCrae/AIS-SRAD-2026

    Schematic, PCB and C++ files for the SRAD flight computer being developed by strath AIS for IREC 2026

    49 parts
  • 4 layers69.5 × 62.6 mmAltimeter Module, the printed circuit board in 3D

    Altimeter Module

    Queens-Rocket-Engineering-Team/av-hardware

    ECAD for SRAD Avionics hardware

    106 parts1

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the QMA6100P?

Yes. The symbol is EasyEDA_Cloud:QMA6100P_C2887190 and the footprint 4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the QMA6100P?

LGA-12_2x2mm, with 12 pins. Its footprint is drawn on this page.

Where is the QMA6100P datasheet?

QST publishes it: the Datasheet link on this page opens it.

Where can I order the QMA6100P?

JLCPCB lists it as part C2887190, with 26,789 in stock; the sellers' links on this page open their listings.

What can replace the QMA6100P?

Parts like it in the library: the LIS2DW12 by STMicroelectronics, the SC7A20HTR by Hangzhou Silan Microelectronics, the LSM303AGR by STMicroelectronics and the KX134-1211 by ROHM Semiconductor. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the QMA6100P?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.