LIS2DH12

STMicroelectronics

-40℃~+85℃ 0.2KB 1.71V~3.6V 500nA 8bit、10bit、12bit Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHS

Extended

Datasheetst/LIS2DH12

Category: Accelerometers
Package: LGA-12(2x2)
Pins: 12

Overview

The LIS2DH12 is an accelerometer made by STMicroelectronics in a LGA-12(2x2) package with 12 pins. -40℃~+85℃ 0.2KB 1.71V~3.6V 500nA 8bit、10bit、12bit Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHS.

PCBKit's library has its KiCad symbol (dk_Motion-Sensors-Accelerometers:LIS2DH12TR, from Digikey) and its footprint (4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, from KiCad's library), ready for a KiCad board. 9,743 are in stock at JLCPCB (part C110926). 19 open-source boards in 15 repositories on GitHub use it.

Symbol

dk_Motion-Sensors-Accelerometers:LIS2DH12TRFrom Digikey

Footprint

4ms_Package_QFP:LGA-12_2x2mm_P0.5mmFrom KiCad's library

From the datasheet

Supply, least: 1.71 V · Vdd, recommended operating min · p. 12
Supply, most: 3.6 V · Vdd, recommended operating max · p. 12
Supply, absolute maximum: 4.8 V · Vdd, absolute max · p. 15
Works from: -40 °C · Operating temperature min · p. 12
Works up to: 85 °C · Operating temperature max · p. 12
Takes working: 11 µA · Vdd, normal mode, 50 Hz ODR, typical · p. 12
Takes asleep: 500 nA · Vdd, power-down mode, typical · p. 12

What it is and has

Selectable full scales: ±2g/±4g/±8g/±16g · p. 1
Digital interface: I2C/SPI · p. 1
Programmable interrupt generators: 2 independent · p. 1
Orientation detection: 6D/4D · p. 1
Sleep functions: Sleep-to-wake and return-to-sleep · p. 1
Free-fall detection: Supported · p. 1
Motion detection: Supported · p. 1
Temperature sensor: Embedded · p. 1
FIFO: Embedded · p. 1
Compliance: ECOPACK®, RoHS and Green · p. 1

Around it

res not specified: between SCL and Vdd_IO; External pull-up required for I2C. · p. 24

Specifications

Parameter	Conditions	As printed	Page
Resistor value for SDO/SA0 pin	Vdd_IO = 1.7 V	typ 54.4 kΩ	9
Resistor value for SDO/SA0 pin	Vdd_IO = 1.8 V	typ 49.2 kΩ	9
Resistor value for SDO/SA0 pin	Vdd_IO = 2.5 V	typ 30.4 kΩ	9
Resistor value for SDO/SA0 pin	Vdd_IO = 3.6 V	typ 20.4 kΩ	9
Sensitivity So	FS bit set to 00; Normal mode; Vdd = 2.5 V, T = 25 °C	typ 4 mg/digit	10
Sensitivity So	FS bit set to 00; Low-power mode; Vdd = 2.5 V, T = 25 °C	typ 16 mg/digit	10
Sensitivity So	FS bit set to 01; Normal mode; Vdd = 2.5 V, T = 25 °C	typ 8 mg/digit	10
Sensitivity So	FS bit set to 01; Low-power mode; Vdd = 2.5 V, T = 25 °C	typ 32 mg/digit	10
Sensitivity So	FS bit set to 10; Normal mode; Vdd = 2.5 V, T = 25 °C	typ 16 mg/digit	10
Sensitivity So	FS bit set to 10; Low-power mode; Vdd = 2.5 V, T = 25 °C	typ 64 mg/digit	10
Sensitivity So	FS bit set to 11; High-resolution mode; Vdd = 2.5 V, T = 25 °C	typ 12 mg/digit	10
Sensitivity So	FS bit set to 11; Normal mode; Vdd = 2.5 V, T = 25 °C	typ 48 mg/digit	10
Sensitivity So	FS bit set to 11; Low-power mode; Vdd = 2.5 V, T = 25 °C	typ 192 mg/digit	10
Acceleration noise density An	FS bit set to 00, High-Resolution mode (Table 10), ODR > 1300 Hz; Vdd = 2.5 V, T = 25 °C	typ 220 ug/√Hz	11
Self-test output change(4) (5) (6) Vst	FS bit set to 00; X-axis; Normal mode; Vdd = 2.5 V, T = 25 °C	min 17 · max 360 LSb	11
Self-test output change(4) (5) (6) Vst	FS bit set to 00; Y-axis; Normal mode; Vdd = 2.5 V, T = 25 °C	min 17 · max 360 LSb	11
Self-test output change(4) (5) (6) Vst	FS bit set to 00; Z-axis; Normal mode; Vdd = 2.5 V, T = 25 °C	min 17 · max 360 LSb	11
Operating temperature range Top		min -40 · max 85 °C	11
Temperature sensor output change vs. temperature TSDr	Vdd = 2.5 V, T = 25 °C	typ 1 digit/°C(2)	11
Operating temperature range Top		min -40 · max 85 °C	11
Supply voltage Vdd	T = 25 °C	min 1.71 · typ 2.5 · max 3.6 V	12
I/O pins supply voltage Vdd_IO	Vdd = 2.5 V, T = 25 °C	min 1.71 V	12
Current consumption in normal mode Idd	50 Hz ODR; Vdd = 2.5 V, T = 25 °C	typ 11 uA	12
Current consumption in normal mode Idd	1 Hz ODR; Vdd = 2.5 V, T = 25 °C	typ 2 uA	12
Current consumption in low-power mode IddLP	50 Hz ODR; Vdd = 2.5 V, T = 25 °C	typ 6 uA	12
Current consumption in power-down mode IddPdn	Vdd = 2.5 V, T = 25 °C	typ 0.5 uA	12
SPI clock cycle tc(SPC)	General operating conditions for Vdd and Top	min 100 ns	13
SPI clock frequency fc(SPC)	General operating conditions for Vdd and Top	max 10 MHz	13
CS setup time tsu(CS)	General operating conditions for Vdd and Top	min 5 ns	13
CS hold time th(CS)	General operating conditions for Vdd and Top	min 20 ns	13
SDI input setup time tsu(SI)	General operating conditions for Vdd and Top	min 5 ns	13
SDI input hold time th(SI)	General operating conditions for Vdd and Top	min 15 ns	13
SDO valid output time tv(SO)	General operating conditions for Vdd and Top	max 50 ns	13
SDO output hold time th(SO)	General operating conditions for Vdd and Top	min 5 ns	13
SDO output disable time tdis(SO)	General operating conditions for Vdd and Top	max 50 ns	13
SCL clock frequency f(SCL)	I2C standard mode; general operating conditions for Vdd and top	min 0 · max 100 kHz	14
SCL clock frequency f(SCL)	I2C fast mode; general operating conditions for Vdd and top	min 0 · max 400 kHz	14
SCL clock low time tw(SCLL)	I2C standard mode	min 4.7 us	14
SCL clock low time tw(SCLL)	I2C fast mode	min 1.3 us	14
SCL clock high time tw(SCLH)	I2C standard mode	min 4 us	14
SCL clock high time tw(SCLH)	I2C fast mode	min 0.6 us	14
SDA setup time tsu(SDA)	I2C standard mode	min 250 ns	14
SDA setup time tsu(SDA)	I2C fast mode	min 100 ns	14
SDA data hold time th(SDA)	I2C standard mode	min 0 · max 3.45 us	14
SDA data hold time th(SDA)	I2C fast mode	min 0 · max 0.9 us	14
START condition hold time th(ST)	I2C standard mode	min 4 us	14
START condition hold time th(ST)	I2C fast mode	min 0.6 us	14
Repeated START condition setup time tsu(SR)	I2C standard mode	min 4.7 us	14
Repeated START condition setup time tsu(SR)	I2C fast mode	min 0.6 us	14
STOP condition setup time tsu(SP)	I2C standard mode	min 4 us	14
STOP condition setup time tsu(SP)	I2C fast mode	min 0.6 us	14
Bus free time between STOP and START condition tw(SP:SR)	I2C standard mode	min 4.7 us	14
Bus free time between STOP and START condition tw(SP:SR)	I2C fast mode	min 1.3 us	14
Supply voltage Vdd		min -0.3 · max 4.8 V	15
Supply voltage on I/O pins Vdd_IO		min -0.3 · max 4.8 V	15
Input voltage on any control pin Vin	CS, SCL/SPC, SDA/SDI/SDO, SDO/SA0	min -0.3 V	15
Acceleration (any axis, powered, Vdd = 2.5 V) APOW	0.5 ms	max 3000 g	15
Acceleration (any axis, powered, Vdd = 2.5 V) APOW	0.2 ms	max 10000 g	15
Acceleration (any axis, unpowered) AUNP	0.5 ms	max 3000 g	15
Acceleration (any axis, unpowered) AUNP	0.2 ms	max 10000 g	15
Operating temperature range TOP		min -40 · max 85 °C	15
Storage temperature range TSTG		min -40 · max 125 °C	15
Electrostatic discharge protection (HBM) ESD		max 2 kV	15
Current consumption	1 Hz; Low-power mode (8-bit data output)	typ 2 uA	17
Current consumption	1 Hz; Normal mode (10-bit data output)	typ 2 uA	17
Current consumption	1 Hz; High resolution (12-bit data output)	typ 2 uA	17
Current consumption	10 Hz; Low-power mode (8-bit data output)	typ 3 uA	17
Current consumption	10 Hz; Normal mode (10-bit data output)	typ 4 uA	17
Current consumption	10 Hz; High resolution (12-bit data output)	typ 4 uA	17
Current consumption	25 Hz; Low-power mode (8-bit data output)	typ 4 uA	17
Current consumption	25 Hz; Normal mode (10-bit data output)	typ 6 uA	17
Current consumption	25 Hz; High resolution (12-bit data output)	typ 6 uA	17
Current consumption	50 Hz; Low-power mode (8-bit data output)	typ 6 uA	17
Current consumption	50 Hz; Normal mode (10-bit data output)	typ 11 uA	17
Current consumption	50 Hz; High resolution (12-bit data output)	typ 11 uA	17
Current consumption	100 Hz; Low-power mode (8-bit data output)	typ 10 uA	17
Current consumption	100 Hz; Normal mode (10-bit data output)	typ 20 uA	17
Current consumption	100 Hz; High resolution (12-bit data output)	typ 20 uA	17
Current consumption	200 Hz; Low-power mode (8-bit data output)	typ 18 uA	17
Current consumption	200 Hz; Normal mode (10-bit data output)	typ 38 uA	17
Current consumption	200 Hz; High resolution (12-bit data output)	typ 38 uA	17
Current consumption	400 Hz; Low-power mode (8-bit data output)	typ 36 uA	17
Current consumption	400 Hz; Normal mode (10-bit data output)	typ 73 uA	17
Current consumption	400 Hz; High resolution (12-bit data output)	typ 73 uA	17
Current consumption	1344 Hz; Normal mode (10-bit data output)	typ 185 uA	17
Current consumption	1344 Hz; High resolution (12-bit data output)	typ 185 uA	17
Current consumption	1620 Hz; Low-power mode (8-bit data output)	typ 100 uA	17
Current consumption	5376 Hz; Low-power mode (8-bit data output)	typ 185 uA	17

Pins, by the datasheet

1 SCL/SPC: I2C serial clock or SPI serial port clock. · p. 8
2 CS: SPI enable and I2C/SPI mode selection: high enables I2C and SPI idle mode; low enables SPI and disables I2C. · p. 9
3 SDO/SA0: SPI serial data output or I2C device address least significant bit; internally pulled up. · p. 9
4 SDA/SDI/SDO: I2C serial data, SPI serial data input, or 3-wire serial data output. · p. 8
5 Res: Connect to GND. · p. 9
6 GND: 0 V supply. · p. 9
7 GND: 0 V supply. · p. 9
8 GND: 0 V supply. · p. 9
9 Vdd: Power supply. · p. 9
10 Vdd_IO: Power supply for I/O pins. · p. 9
11 INT2: Interrupt pin 2. · p. 9
12 INT1: Interrupt pin 1. · p. 9

Ordering codes, by the datasheet

LIS2DH12TR: LGA-12 · -40 to +85 °C; tape and reel · p. 1

Parameters

Acceleration Measurement Range (MAX): ±16g
Accelerometer Sensing Axis: X,Y,Z
Cache Size: 0.2KB
Current - Supply: 11uA
Features: Motion event detection
Interface: SPI
Operating Temperature: -40℃~+85℃
Output Bits: 12bit
Sensor Type: Accelerometer
Standby Current: 500nA
Voltage - Supply: 1.71V~3.6V
Voltage - Supply(Absolute Max): 4.8V

Order codes

LIS2DH12TRLCSC C110926

Pinout

The pins of the LIS2DH12
Pin	Name	Type
1	SCL/SPC	Input
2	CS	Input
3	SDO/SA0	Input/output
4	SDA/SDI/SDO	Input/output
5	Reserved	Power in
6	GND	Power in
7	GND	Power in
8	GND	Power in
9	VDD	Power in
10	VDD_IO	Power in
11	INT2	Output
12	INT1	Output

Open-source boards using it

All 19

4 layers121.9 × 109.2 mm
Plinkyblack hwmidi jacks
plinkysynth/plinky_public
a public release of the plinky sw and hw
300 parts227
4 layers38.6 × 39.5 mm
Ruuvitag revb71
ruuvi/ruuvitag_hw
RuuviTag hardware projects
64 parts115
6 layers30 × 48 mm
Holter
peterisza/mobilecg
MobilECG II is an open source clinical grade Holter ECG. For more information, please visit http://mobilecg.hu.
231 parts66
4 layers80.7 × 78.7 mm
Ostentus hw
golioth/ostentus-hw
A PCB front panel for Golioth's Aludel hardware platform
77 parts17CERN-OHL-P-2.0
4 layers36 × 46 mm
Pcb LR1110
TheThingsIndustries/generic-node-te
Generic Node Tracker Edition
162 parts10
4 layers181.6 × 100.9 mm
OpenAVNS KiCad Project compact
OpenAVNS/OpenAVNS
Hardware, firmware, and mechanical design
227 parts5CC-BY-4.0
2 layers85 × 54 mm
Imcp devkit
htmicron/thirdpartyHT32SX
Third party contributions to HT32SX (https://github.com/htmicron/ht32sx)
183 parts2
2 layers26.2 × 53.1 mm
SemiSemafor
TVavrinec/SemiSemafor

50 parts1MIT

Show this part on your page

A live frame, for any web page

<iframe src="https://pcbkit.io/embed/parts/st/LIS2DH12" title="LIS2DH12 in PCBKit" width="100%" height="480" style="border:0;border-radius:12px" allow="fullscreen" loading="lazy"></iframe>

A picture

<img src="https://pcbkit.io/embed/parts/st/LIS2DH12.jpg" alt="LIS2DH12" width="1200" height="900">

A picture that opens the part, for a README

[![LIS2DH12](https://pcbkit.io/embed/parts/st/LIS2DH12.jpg?size=s)](https://pcbkit.io/parts/st/LIS2DH12)

Questions

Is there a KiCad symbol and footprint for the LIS2DH12?

Yes. The symbol is dk_Motion-Sensors-Accelerometers:LIS2DH12TR and the footprint 4ms_Package_QFP:LGA-12_2x2mm_P0.5mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LIS2DH12?

LGA-12(2x2), with 12 pins. Its footprint is drawn on this page.

Where is the LIS2DH12 datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LIS2DH12?

JLCPCB lists it as part C110926, with 9,743 in stock; the sellers' links on this page open their listings.

What can replace the LIS2DH12?

Parts like it in the library: the LIS2DW12 by STMicroelectronics, the SC7A20HTR by Hangzhou Silan Microelectronics, the LSM303AGR by STMicroelectronics and the QMA6100P by QST. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LIS2DH12?

19 boards in 15 repositories on GitHub; the most starred are listed on this page, with their KiCad files.

LIS2DH12

Overview

Symbol

Footprint

From the datasheet

What it is and has

Around it

Specifications

Pins, by the datasheet

Ordering codes, by the datasheet

Parameters

Order codes

Pinout

Open-source boards using it

Plinkyblack hwmidi jacks

Ruuvitag revb71

Holter

Ostentus hw

Pcb LR1110

OpenAVNS KiCad Project compact

Imcp devkit

SemiSemafor

Show this part on your page

Questions

Is there a KiCad symbol and footprint for the LIS2DH12?

What package is the LIS2DH12?

Where is the LIS2DH12 datasheet?

Where can I order the LIS2DH12?

What can replace the LIS2DH12?

Which open-source boards use the LIS2DH12?

Parts like it

LIS2DW12

SC7A20HTR

LSM303AGR

QMA6100P

KX134-1211

LIS2HH12

IIS2DLPC

BMA253