

Ostentus hw
A PCB front panel for Golioth's Aludel hardware platform
- Size
- 80.7 × 78.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 77
- Nets
- 77
- Pads
- 241
- Tracks, vias
- 426, 124
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Jan 2023
- Updated
- 19 Jul 2024
Overview
Ostentus hw is an open-source printed circuit board by golioth, from the golioth/ostentus-hw repository on GitHub, published under the CERN-OHL-P-2.0 licence. It is a 4-layer board of 80.7 × 78.7 mm with 77 parts on 77 nets, routed with 426 tracks and 124 vias.
It is built around the CAP1203-1-SN, LIS2DH12 and BAV99, with the XZMDKCBDDG45S-9, B340LA and BSS138 among its other parts. Its parts include 30 resistors, 14 capacitors, 8 diodes, 6 connectors and 3 ICs. It belongs with the lEDs and displays boards and the RP2040 boards of this library.
Main components
7CAP1203-1-SN
SOIC-8-40℃~+125℃ 3 3V~5.5V 50uA 750uA 8kV Capacitive Touch、自动灵敏度校准、防水抗干扰触摸、手势检测 SOIC-8 Touch Sensors ROHSMicrochip TechnologyTouch SensorsLIS2DH12
LGA-12(2x2)-40℃~+85℃ 0.2KB 1.71V~3.6V 500nA 8bit、10bit、12bit Accelerometer Motion event detection SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSSTMicroelectronicsAccelerometersBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching DiodesXZMDKCBDDG45S-9
SMD-4P,3.2x2.8mm-40℃~+85℃ 120° 2.5V、4V、4.1V 20mA 460nm、515nm、645nm 465nm、525nm、630nm 75mW、120mW、123mW 98mcd、108mcd、497mcd Red, Blue, Green Water Clear SMD-4P,3.2x2.8mm LED Indication - Discrete ROHSSunLEDLED Indication - DiscreteB340LA
SMA(DO-214AC)-55℃~+150℃ 1 Independent 2mA@40V 3A 40V 450mV@3A 70A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsNR4018T100M
SMD,4x4mm1.2A 10uH 216mΩ 840mA ±20% 消费级 SMD,4x4mm Power Inductors ROHSTaiyo YudenPower Inductors
README
README.mdOstentus
The Ostentus is part of Golioth's "Aludel" platform, a family of devices that makes it easier to connect hardware to the internet using Golioth's Firmware SDK and cloud platform. The Aludel family of devices are widely used in Golioth's Reference Designs, which are end-to-end demonstrations of IoT devices targeted at different vertical applications.
This board acts as a display and input device for Reference Designs. Using a series of simple calls from a Zephyr platform, it's possible to offload readings from the underlying device and push them up to the display without consuming processing cycles on the main processor (such as the nRF9160 on the Elixir). We chose ePaper in order to have a high visibility display that would continue showing a reading when in a low power or off state. Since the QWIIC connector powers the Ostentus as well as sending data, it's possible to power down the entire subsystem of the Ostentus while still operating the underlying Elixir.
This is released as Revision C of the Ostentus.
On the board
- Raspberry Pi Pico - Originally chosen during the part shortages of 2022-23, the Pico provides a low cost solution including a programming interface over the USB port + micropython ease-of-use
- ePaper interface
- Accelerometer (LIS2DH12) -- Currently unimplemented but targeting "double tap" behaviors in the future
- 3 button capacitive touch controller (CAP-1203-1)
- QWIIC header for incoming power and i2c
- Downward firing LEDs
Programming
There are two companion repositories which enable the Ostentus to work:
- A firmware image for the Pico (
ostentus)- This contains C and Micropython elements to process incoming i2c commands and control elements on the Ostentus like the ePaper and LEDs
- There is a binary available as a release for easy loading onto the board.
- A helper library for Zephyr (
libostentus)- This includes commands and hooks for using i2c to communicate from a main board like the Elixir up to the Ostentus
- Currently only Zephyr is supported but it should port FreeRTOS or bare metal
The Aludel form factor
The Aludel form factor (Originally the "Aludel Mini" form factor) is based around the Bud Boxes CU-1937-MB. This board is designed to affix to the top of this case without the original plastic lid from Bud. The QWIIC connector on backside of the Ostentus is meant to be wired to the Elixir, which has a matching connector.
Rev C Photos
Purchase
The Ostentus board is not available to purchase. Please contact devrel@golioth.io if you would like to arrange help with your manufacturing.
Hardware Lineage and License
This design was derived from the Pimoroni Badger 2040
This board is released under the CERN OHL-P (v2) license. See LICENSE for more info.
Any replication or modification of this design must remove references to Golioth and The Golioth Logo, which is a trademark of Golioth, Inc.
Parts
77| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0 | Resistor_SMD:R_0603_1608Metric | R3, R10, R11, R12, R14, R15, R16, R17, R18, R19, R20, R21, R26, R27, R28, R29 +1 |
| 6 | 1K | Resistor_SMD:R_0603_1608Metric | R8, R9, R22, R23, R24, R25 |
| 5 | 1U | Capacitor_SMD:C_0603_1608Metric | C7, C9, C10, C11, C12 |
| 4 | 0.1U | Capacitor_SMD:C_0603_1608Metric | C3, C4, C13, C14 |
| 4 | MH | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1K8 | Resistor_SMD:R_0603_1608Metric | R4, R5, R13 |
| 3 | 4U7 | Capacitor_SMD:C_0805_2012Metric | C5, C6, C8 |
| 3 | cap1203-PAD | ostentus:CAP1203-Pad-Ostentus | J4, J5, J6 |
| 2 | 500 | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D7, D8 |
| 2 | LOGO | ostentus:internet-5mm-1000dpi | G***, G*** |
| 2 | TL3342 Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 2 | Test Point | TestPoint:TestPoint_Pad_1.5x1.5mm | TP2, TP3 |
| 2 | XZMDKCBDDG45S-9 | ostentus:LED_XZMDKCBDDG45S-9 | D9, D10 |
| 1 | 0R47 | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 10U | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1U | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | B340LA | Diode_SMD:D_SMA | D6 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CAP1203-1-SN | ostentus:SOIC127P600X175-8N | U1 |
| 1 | Conn_01x24_Female | Connector_FFC-FPC:Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal | J1 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J3 |
| 1 | Green | ostentus:XZFBB45S-9 | D2 |
| 1 | LIS2DH12 | ostentus:SENSOR_LIS2DH12 | U3 |
| 1 | LOGO | ostentus:TheGolioth-7mm-1000dpi | G*** |
| 1 | LOGO | ostentus:battery-5mm-1000dpi | G*** |
| 1 | LOGO | ostentus:power-5mm-1000dpi | G*** |
| 1 | LOGO | ostentus:lightbulb-5mm-1000dpi | G*** |
| 1 | NR4018T100M | Inductor_SMD:L_Taiyo-Yuden_NR-40xx | L1 |
| 1 | Pico | ostentus:RPi_Pico_SMD_TH_Paste | U2 |
| 1 | QWIIC | Connector_JST:JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J2 |
| 1 | Red | ostentus:XZFBB45S-9 | D1 |
| 1 | Yellow | ostentus:XZFBB45S-9 | D3 |
Similar boards
- 2 layers133 × 114.7 mm

- 2 layers90 × 90 mm

Sensor bed
ufan/sensor_bed
A PCB with various kinds of sensors like optical mouse sensor, joystick, encoder, capacitive sliders etc.
70 parts4 - 2 layers25.4 × 52 mm

PiicoDev Capacitive Touch Sensor CAP1203
CoreElectronics/CE-PiicoDev-Capacitive-Touch-Sensor-CAP1203
PiicoDev Capacitive Touch Sensor CAP1203
44 parts1 - 2 layers221 × 221 mm

WordclockPCB
maelgui/wordclock
This repository contains every files needed to build the clock
159 parts - 2 layers120 × 85 mm

- 2 layers61.5 × 126.8 mm

Badge eda
theparanoids/keyhole-badge
The Paranoids have designed a sound-reactive LED electronic conference badge for DEFCON 2022. This repository contains the PCB design files for the badge and the source code to the firmware that runs on the…
88 parts7 - 4 layers43 × 95 mm

Oe commutator controller
open-ephys/commutators
Active coaxial commutator for electrophysiology
92 parts5 - 4 layers43 × 95 mm

Oe commutator controller
open-ephys/commutator-controller
Open Ephys commutator PCB and firmware
107 parts2
Questions
How big is the Ostentus hw PCB?
It measures 80.7 × 78.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Ostentus hw use?
77 parts, built around the CAP1203-1-SN, LIS2DH12, BAV99 and XZMDKCBDDG45S-9. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ostentus hw KiCad files?
From the golioth/ostentus-hw repository on GitHub, at the commit this page was made from: the board is ostentus-hw.kicad_pcb and its schematic ostentus-hw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ostentus hw design in my own project?
Its repository publishes it under the CERN-OHL-P-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).