Skip to the content
12345678

MAX3485ESA+T

Maxim Integrated (Analog Devices)Extended

-40℃~+85℃ 1 1 10Mbps 32 3V~3.6V Half-Duplex Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS

Part id
maxim/MAX3485ESA+T
Category
RS 485, RS 422 ICs
Package
SOIC-8
Pins
8
In stock
28,759 at JLCPCB (C18148)
Used on
2 open-source boards

Overview

The MAX3485ESA+T is a RS 485, RS 422 IC made by Maxim Integrated (Analog Devices) in a SOIC-8 package with 8 pins. -40℃~+85℃ 1 1 10Mbps 32 3V~3.6V Half-Duplex Transceiver SOIC-8 RS-485 / RS-422 ICs ROHS.

PCBKit's library has its KiCad symbol (Interface_UART:MAX3485, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 28,759 are in stock at JLCPCB (part C18148). 2 open-source boards in 2 repositories on GitHub use it.

Symbol

1RO2RE3DE4DI5GND6A7B8VCC
Interface_UART:MAX3485From KiCad's library

Footprint

12345678
Package_SO:SOIC-8_3.9x4.9mm_P1.27mmFrom KiCad's library

From the datasheet

10
Supply, least
3 V · VCC, recommended operating, min · p. 1
Supply, most
3.6 V · VCC, recommended operating, max · p. 1
Supply, absolute maximum
7 V · VCC, absolute maximum · p. 2
Works from
-40 °C · MAX3485ESA, operating ambient, min · p. 1
Works up to
85 °C · MAX3485ESA, operating ambient, max · p. 1
Takes working
1.1 mA · VCC, driver enabled, no load, typical · p. 3
Takes at most
2.2 mA · VCC, driver enabled, no load, max · p. 3
Takes asleep
2 nA · VCC, shutdown, DE = 0V and RE = VCC, typical · p. 3
Data rate, most
10 Mbit/s · MAX3485, guaranteed data rate, max · p. 1
Edge
8 ns · Driver differential output transition, RL = 60Ω, typical · p. 3

Open-source boards using it

2
  • 4 layers163 × 117 mmTeensy 4.1 + Jetson Nano powered from board, the printed circuit board in 3D

    Teensy 4.1 + Jetson Nano powered from board

    olexsu/inos-rev-a-robotics-controller

    INOS Rev A — CAN-based robotic arm controller designed as a real-time motion-control node for NVIDIA Jetson robotics systems.

    157 partsMIT
  • 2 layers80 × 54 mmBis zone, the printed circuit board in 3D

    Bis zone

    tsmiltonAgents/pl60c-dmx-wakeup

    A small ESP32-S3 board that drives the wired DMX512 input of a Neewer PL60C panel light so the light can be ramped up slowly in the morning (sunrise alarm). Rev A, 2026-09-02.

    39 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MAX3485ESA+T?

Yes. The symbol is Interface_UART:MAX3485 and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MAX3485ESA+T?

SOIC-8, with 8 pins. Its footprint is drawn on this page.

Where is the MAX3485ESA+T datasheet?

Maxim Integrated (Analog Devices) publishes it: the Datasheet link on this page opens it.

Where can I order the MAX3485ESA+T?

JLCPCB lists it as part C18148, with 28,759 in stock; the sellers' links on this page open their listings.

What can replace the MAX3485ESA+T?

Parts like it in the library: the SP3485EN-L/TR by MaxLinear, the SP485EEN-L/TR by MaxLinear, the SN75176BD by Texas Instruments and the MAX485ESA+T by Maxim Integrated (Analog Devices). Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MAX3485ESA+T?

2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.