Skip to the content
9

ADM7172ACPZ-3.3-R7

Analog DevicesExtended

-40℃~+125℃@(Tj) 1 172mV@(2A) 2A 3.3V 5uVrms 6.5V 60dB@(100kHz) 700uA Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive LFCSP-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
adi/ADM7172ACPZ-3.3-R7
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
LFCSP-8(3x3)
Pins
8
In stock
2,580 at JLCPCB (C514342)
Used on
1 open-source board

Overview

The ADM7172ACPZ-3.3-R7 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by Analog Devices in a LFCSP-8(3x3) package with 9 pins. -40℃~+125℃@(Tj) 1 172mV@(2A) 2A 3.3V 5uVrms 6.5V 60dB@(100kHz) 700uA Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Adjustable soft-start、Built-in soft-start Positive LFCSP-8(3x3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:ADM7172ACPZ-3.3-R7, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-8_L3.0-W3.0-P0.50-BL-EP, from EasyEDA), ready for a KiCad board. 2,580 are in stock at JLCPCB (part C514342). 1 open-source board in 1 repository on GitHub use it.

Symbol

EP9VIN8VIN7GND6EN5SS4SENSE3OUT2OUT1
EasyEDA_Cloud:ADM7172ACPZ-3.3-R7From EasyEDA

Footprint

9
EasyEDA_Cloud:DFN-8_L3.0-W3.0-P0.50-BL-EPFrom EasyEDA

Pinout

9
The pins of the ADM7172ACPZ-3.3-R7
PinNameType
1OUTUnspecified
2OUTUnspecified
3SENSEUnspecified
4SSUnspecified
5ENUnspecified
6GNDUnspecified
7VINUnspecified
8VINUnspecified
9EPUnspecified

Open-source boards using it

1
  • 4 layers106 × 98 mmMotion control, the printed circuit board in 3D

    Motion control

    menloresearch/asimov-1

    v1 of Asimov, an open-source humanoid robot

    76 parts1.4kCERN-OHL-S-2.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the ADM7172ACPZ-3.3-R7?

Yes. The symbol is EasyEDA_Cloud:ADM7172ACPZ-3.3-R7 and the footprint EasyEDA_Cloud:DFN-8_L3.0-W3.0-P0.50-BL-EP, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ADM7172ACPZ-3.3-R7?

LFCSP-8(3x3), with 9 pins. Its footprint is drawn on this page.

Where is the ADM7172ACPZ-3.3-R7 datasheet?

Analog Devices publishes it: the Datasheet link on this page opens it.

Where can I order the ADM7172ACPZ-3.3-R7?

JLCPCB lists it as part C514342, with 2,580 in stock; the sellers' links on this page open their listings.

What can replace the ADM7172ACPZ-3.3-R7?

Parts like it in the library: the LM1084S-3.3/TR by HGSEMI, the UZ1085L-33-TN3-R by UTC, the LD1085D2T33R by STMicroelectronics and the BL8072CLTR33 by BL. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ADM7172ACPZ-3.3-R7?

1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.