Skip to the content
1234

BL8072CLTR33

BLExtended

-40℃~+85℃@(Ta) 1 18V 2A 3.3V 3uA 850mV@(1.5A) Fixed Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
bl/BL8072CLTR33
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
SOT-223-3
Pins
4
In stock
4,764 at JLCPCB (C843780)
Used on
4 open-source boards

Overview

The BL8072CLTR33 is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by BL in a SOT-223-3 package with 4 pins. -40℃~+85℃@(Ta) 1 18V 2A 3.3V 3uA 850mV@(1.5A) Fixed Positive SOT-223-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:BL8072CLTR33, from EasyEDA) and its footprint (EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR, from EasyEDA), ready for a KiCad board. 4,764 are in stock at JLCPCB (part C843780). 4 open-source boards in 4 repositories on GitHub use it.

Symbol

1VSS2VOUT3VDD4TAB
EasyEDA_Cloud:BL8072CLTR33From EasyEDA

Footprint

1234
EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BRFrom EasyEDA

Pinout

4
The pins of the BL8072CLTR33
PinNameType
1VSSUnspecified
2VOUTUnspecified
3VDDUnspecified
4TABUnspecified

Open-source boards using it

4
  • 4 layers115 × 82.3 mmMainPCB, the printed circuit board in 3D

    MainPCB

    HelloAlex4/Maturitaetsarbeit-Design-and-Development-of-a-Portable-Stereoscopic-Wigglegram-Camera

    Documentation of the merged wigglegram camera

    288 parts12
  • 2 layers99.7 × 100 mmBadge Tropicon 2026, the printed circuit board in 3D

    Badge Tropicon 2026

    ElectronicCats/Badge_Tropicon-2026

    Badge Oficial Tropicon 2026

    64 parts1
  • 4 layers45.5 × 78.5 mmStm32-module, the printed circuit board in 3D

    Stm32-module

    emb3rcia/stm32-module

    My first MCU module! Made for HackClub's Blueprint! Supports USB-C and gives 66 gold pins, 2 of which are 1.8V!

    35 parts
  • 6 layers28.3 × 28.3 mmDrone, the printed circuit board in 3D

    Drone

    cookiemonsternz/drone

    F \ish PV is a open source, custom stack, 75mm tinywhoop drone design. It utilises AM32 for the ESC firmware and Betaflight for the flight controller.

    78 parts5

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the BL8072CLTR33?

Yes. The symbol is EasyEDA_Cloud:BL8072CLTR33 and the footprint EasyEDA_Cloud:SOT-223-3_L6.5-W3.4-P2.30-LS7.0-BR, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the BL8072CLTR33?

SOT-223-3, with 4 pins. Its footprint is drawn on this page.

Where is the BL8072CLTR33 datasheet?

BL publishes it: the Datasheet link on this page opens it.

Where can I order the BL8072CLTR33?

JLCPCB lists it as part C843780, with 4,764 in stock; the sellers' links on this page open their listings.

What can replace the BL8072CLTR33?

Parts like it in the library: the LM2936MP-3.3-TI by Texas Instruments, the LM1084S-3.3/TR by HGSEMI, the UZ1085L-33-TN3-R by UTC and the LD1085D2T33R by STMicroelectronics. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the BL8072CLTR33?

4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.