2 layers18 × 22.5 mm
Esp32-c3-supermini
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
2 parts1Apache-2.0
Open-source KiCad boards
13 match “mithro”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers20.3 × 86.4 mm
Pmod adapter
mithro/pmod-numato
Adapter for going from Numato<->Pmod multi-pmod spacing.
32 parts1CC-BY-SA-4.0 - 2 layers14.4 × 30 mm
Cc1101-dsun
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
4 parts1Apache-2.0 - 2 layers24 × 58 mm
Esp32c3-sx1278-adapter
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
5 parts1Apache-2.0 - 2 layers17.5 × 22.5 mm
Sx1278-ra02-breakout
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
2 parts1Apache-2.0 - 2 layers15 × 30 mm
Cc1101-e07-m1101d
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
4 parts1Apache-2.0 - 2 layers29 × 38 mm
Esp32c3-radio adapter
mithro/esp32-to-433mhz
ESP32-C3 SuperMini form-factor KiCad board with castellated headers
14 parts1Apache-2.0 - 2 layers67.9 × 20.3 mm
Pmod cp2104
mithro/pmod-cp2104
PMod Type 4A UART to USB interface using SiLabs CP2104
41 partsCC-BY-SA-4.0 - 4 layers29.9 × 72.9 mm
Dp aux intercept
mithro/displayport-hardware-hacking
Open Source Hardware Designs for working with DisplayPort and intercepting AUX signals.
24 parts21 - 2 layers100 × 58 mm
MoBoControl
mithro/MoBoControl
The info you are looking for is likely in this repo's wiki: look there for details
64 partsApache-2.0 - 2 layers
Dvi to gtp
mithro/HDMI2USB-dvi-to-gtp
Circuit designs for allowing DVI/HDMI be received on the GTP transceivers inside the Spartan 6 LXT series parts.
26 parts2Apache-2.0 - 4 layers68.9 × 31.9 mm
TOFE AXIOM adapter
mithro/HDMI2USB-TOFE-AXIOM-adapter
Adapter which allows the expansion cards from the AXIOM be used on a TOFE compatible board.
21 parts3CC-BY-SA-4.0 - 2 layers25 × 23.9 mm
Rpi camera led
mithro/rpi-camera-led
Interposer for the Raspberry Pi camera flex cable: passes the 15-way CSI bus straight through and adds I2C-controlled camera GPIO, PWM illumination LEDs and an ambient light sensor, driven by a CH32V003.
24 parts1Apache-2.0