4 layers50.1 × 32.6 mm
Wearable e ink
Just4Stan/soldering-workshop
Initial designed to give workshops at HighTechLab in Leuven
41 parts
Open-source KiCad boards
8,113 match “j-w-e”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers
- 2 layers76.2 × 86.4 mm
- 4 layers60 × 60 mm
B VNH5019ATR W ENC ELITE BRK R1.0
Boardoza/Boardoza_VNH5019ATR_w-Enc_Elite_Breakout_Board
High-power H-bridge motor driver breakout board based on STMicroelectronics VNH5019A-E with integrated encoder interface and thermal heatsink design.
32 parts1CC-BY-SA-4.0 - 2 layers31.8 × 36.8 mm
E INK Watch
DomenicHampson/EnkWatch
Custom designed e-ink smartwatch with 2 weeks of battery life. Displays time, date, battery health, altitude and weather data (note: I am still in the process of assembling the PCB and writing the firmware)
53 parts - 6 layers66 × 54 mm
JC8012P4A1C I W Y CAN
Meisterschulen-am-Ostbahnhof-Munchen/JC8012P4A1C_I_W_Y_CAN
JC8012P4A1C_I_W_Y addon PCB for CAN-Bus
45 partsGPL-3.0 - 2 layers159.5 × 134.5 mm
WEMB02 j
brengi/CESE-PCB
Curso de Diseño de Circuitos Impresos de la Carrera de Especialización en Sistemas Embebidos
98 parts7 - 2 layers68.6 × 86.4 mm
- 2 layers54.9 × 59.8 mm
NX J401-usb m2-key e V1
RealtimeRoboticsGroup/electrical
This project is open-source hardware and is licensed under the Solderpad Hardware License v2.1 (the "License"), which is a permissive license based on the Apache License, Version 2.0.
3 parts1 - 2 layers75.2 × 74.7 mm
- 2 layers73 × 48 mm
Berg wire jumper extender
nandanghawate/arduino-atmega328-custom-hw-sw-projects-NG
This will be / is the collection of sample circuits, PCB layouts, codes and libraries that I will create during the process of exploring ATMEGA328, Arduino - Uno, Nano, Mini
19 parts2 - 2 layers65 × 30 mm
Wireless uhat rpi radio module-2 eeprom joke
Lannakin/rpi-pico-pizero-wireless-uhat-rpi-radio-module-2
an awful uhat form factor board for the rp2350 or other raspberry pi microcontroller-based boards in the raspberry pi zero form factor. it is designed by a cat with bad hobbies and indescribable delusions.
16 parts1CC-BY-SA-4.0 - 2 layers66 × 32 mm
- 2 layers312 × 128 mm
Mechanical PicoBoard W
FMG9167/Mechanical-PicoBoard-W
A wireless mechanical keyboard made using raspberry pi pico W
141 parts1 - 4 layers99.6 × 76.2 mm
- 2 layers158.2 × 115.1 mm
- 2 layers100 × 42 mm
- 2 layers28 × 48 mm
E meter hardware
www-ShapeLabs-de/sgm4_to_mqtt
ESP8266 electricity meter reading head for SGM-C4 meter with homeassistant mqtt-discovery
34 parts3MIT - 2 layers50 × 94 mm
E dice
jayantrathoremponline-prog/Electronic_dice
The Electronic Dice is a digital dice circuit designed and developed using KiCad. The project uses a CD4017 decade counter to generate sequential outputs, which are displayed through seven LEDs arranged in a dice…
36 parts - 2 layers60 × 82 mm
LWL Controller rev e
JFly02/LWL_Projekt
Zielversion ist KiCad 10.0.5. Der verbindliche Stand besteht aus:
33 parts - 4 layers170.2 × 111.2 mm
E paper picture frame HW
JosefTAv/E-paper-picture-frame-HW
Hardware files for ESP32 based E-paper picture frame
110 partsMIT - 2 layers76.8 × 34.5 mm
Bc250 carrier e
peterdk31/bc250_ws2812b_controller
A small controller + receiver (esp32) for controlling a string of ws2812b leds. It installs a daemon that can switch between different effects based on some defined rules.
13 parts4 - 2 layers60 × 82 mm
LWL Controller rev e
JFly02/LWL_Projekt
Zielversion ist KiCad 10.0.5. Der verbindliche Stand besteht aus:
32 parts - 2 layers40 × 29 mm
PCB OLED OEL1M4033FPC A1 E
wangbo13/OSHW
Lexsion 的开源硬件项目，尽管拿去使用！Open-source hardware projects by Lexsion, that everyone can use!
23 parts