2 layers58.4 × 45.7 mm
Open-source KiCad boards
10 match “gabeak2”Printed circuit boards designed in KiCad and published on GitHub, each with its parts, layers and size, its README and its files; open any of them in PCBKit.
- 2 layers158 × 56 mm
LDC BNC interface
gabeak2/KASM_LDC_SMA_breakout
Breakout board from DB25 to 8 SMA connectors for KASM Eddy Current Sensors
29 parts - 4 layers59.7 × 54.6 mm
- 4 layers43.2 × 36.8 mm
- 4 layers33 × 31.9 mm
Touch sensor light
gabeak2/Touch_Sensor_Lamp
A small PCB with a capacitive touch sensor IC and 2 1W LEDs. I use them to embed in 3d-printed lithophane lamps, see
24 parts - 4 layers137.2 × 22.9 mm
PMOD differential driver
gabeak2/Differential-SPI-over-Ethernet
Board that natively plugs into PMOD 6x2 headers from Digilent FPGA boards, and converts it to 2 differential SPI channels sent out to RJ45 connectors for ethernet cables
67 parts - 2 layers67.9 × 35.6 mm
Wemos D1 mini weather station
gabeak2/Wemos_D1_mini_weather_station
Mini weather station built around ESP8266 WiFi SOC on a Wemos D1-Mini breakout PCB. Shows inside temperature and wifi-updated outside temp, and has LED to indicate for rain.
22 parts - 2 layers27.9 × 39.8 mm
Attiny arduino serial
gabeak2/ATTINYx14_Arduino
An arduino-style breakout PCB for the ATTINY-x14 line of chips (specifically designed with the ATTINY1614). Includes USB-Serial converter and USB connector so it is pretty much plug-and-play once you flash megatinycore…
20 parts - 4 layers115.8 × 104.1 mm
KASM PCB REV1
gabeak2/KASM_PCB
Thesis Project - PCB to drive actuators for the Adaptive Secondary Mirror at Keck
348 parts - 6 layers121 × 70.6 mm
Kasm pcb rev2
gabeak2/KASM_ACTUATOR_PCB_REV2
PCBA to drive adaptive mirrors at Keck and UH88
268 partsGPL-3.0